Bug#615609: linux-image-2.6.37-1-loongson-2: Lemote mini-pc with linux-image-2.6.37-1-loongson-2 doesn't support external usb NIC (TU2-ET100)
2011/2/28 wu zhangjin <wuzhangjin@gmail.com>:
> (Forward to loongson-dev group, CC to Shiwei and the folks from Lemote)
>
>
> ---------- Forwarded message ----------
> From: Martin Michlmayr <tbm@cyrius.com>
> Date: Mon, Feb 28, 2011 at 2:32 AM
> Subject: Re: Bug#615609: linux-image-2.6.37-1-loongson-2: Lemote
> mini-pc with linux-image-2.6.37-1-loongson-2 doesn't support external
> usb NIC (TU2-ET100)
> To: Wu Zhangjin <wuzhangjin@gmail.com>
> Cc: Javier Vasquez <j.e.vasquez.v@gmail.com>, 615609@bugs.debian.org
>
>
> Wu Zhangjin,
>
> Do you think you can have a look at the bug report below.
>
> * Javier Vasquez <j.e.vasquez.v@gmail.com> [2011-02-27 12:19]:
>> Package: linux-2.6
>> Version: 2.6.37-1
>> File: linux-image-2.6.37-1-loongson-2
>> Severity: important
>> Tags: upstream
>>
>> *** Please type your report below this line ***
>>
>> I have a lemote mini-pc loongson-2f, and when hooking an external usb
>> NIC, the trendenet TU2-ET100, after disabling the inner NIC (realtek),
>> then the device starts working nice for a while and then all of a
>> sudden it just halts, and doing ifdown/ifup combination several times
>> doesn't seem to be able to bring it up.
>>
>> I believe this problem is not exclusive to debian given that I've
>> tried the gnew-sense 2.6.37 kernel, and another one from anheng, and
>> none seems to work for this. Perhaps it exposes a HW problem, such
>> the one for the inner NIC which can't handle checksums, and the CPU
>> needs to deal with them (/sbin/ethtool -K eth0 rx off), but if it's a
>> HW problem there might be a way to work around it (such as some
>> usb-net or asix modules parameters). I'm not aware of any known
>> problem related to this, so the first suspect is a kernel problem
>> associated to the usb-net or the asix modules, which are the ones
>> loaded for this external USB device. Perhaps for lemote HW there are
>> some specific compile options required, and maybe missing, :-)
>>
>> Please notice the kernel was loaded with "debug" boot parameter, and
>> even by doing so, the kernel log only shows the following associated
>> to this problem:
>>
>> [ 68.076000] usb 1-1: new high speed USB device using ehci_hcd and address 4
>> [ 68.220000] usb 1-1: New USB device found, idVendor=0b95, idProduct=7720
>> [ 68.220000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [ 68.220000] usb 1-1: Product: AX88772
>> [ 68.220000] usb 1-1: Manufacturer: ASIX Elec. Corp.
>> [ 68.220000] usb 1-1: SerialNumber: 000001
>> [ 69.164000] asix 1-1:1.0: eth1: register 'asix' at
>> usb-0000:00:0e.5-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:08:1c:5f
>> [ 69.164000] usbcore: registered new interface driver asix
>> [ 173.484000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>> [ 173.620000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>> [ 184.120000] eth1: no IPv6 routers present
>> [ 593.268000] ehci_hcd 0000:00:0e.5: force halt; handshake
>> 9000000050071014 00004000 00000000 -> -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: can't reschedule qh
>> 98000000bc2d5200, err -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: force halt; handshake
>> 9000000050071014 00004000 00004000 -> -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: HC died; cleaning up
>> [ 593.272000] usb 1-1: USB disconnect, address 4
>> [ 593.280000] asix 1-1:1.0: eth1: unregister 'asix'
>> usb-0000:00:0e.5-1, ASIX AX88772 USB 2.0 Ethernet
>>
>> While this is still a problem, the mini-pc is of not much usage to me,
>> given that its aimed to work as a two NICs gateway (and light server
>> for couple of light services). The ineer NIC is working now after the
>> work around for the checksum (inner NIC can handle the checks), but
>> I'm still missing the external usb NIC to work...
>>
>> Below is additional information...
>>
>>
>> -- Package-specific info:
>> ** Version:
>> Linux version 2.6.37-1-loongson-2f (Debian 2.6.37-1)
>> (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-2) ) #1 Wed Feb
>> 16 17:37:56 UTC 2011
>>
>> ** Command line:
>> console=tty no_auto_cmd root=/dev/sda6 resume=/dev/sda5 debug
>> PMON_VER=LM6004-1.3.6 EC_VER=undefined machtype=lemote-fuloong-2f-box
>>
>> ** Not tainted
>>
>> ** Kernel log:
>> [ 5.288000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
>> [ 5.292000] usb usb2: New USB device strings: Mfr=3, Product=2,
>> SerialNumber=1
>> [ 5.296000] usb usb2: Product: OHCI Host Controller
>> [ 5.300000] usb usb2: Manufacturer: Linux 2.6.37-1-loongson-2f ohci_hcd
>> [ 5.304000] usb usb2: SerialNumber: 0000:00:0e.4
>> [ 5.312000] hub 2-0:1.0: USB hub found
>> [ 5.316000] hub 2-0:1.0: 4 ports detected
>> [ 5.596000] PCI: Setting latency timer of device 0000:00:0e.3 to 64
>> [ 5.680000] usbcore: registered new interface driver usbserial
>> [ 5.688000] USB Serial support registered for generic
>> [ 5.716000] usb 2-3: new low speed USB device using ohci_hcd and address 2
>> [ 5.944000] usb 2-3: New USB device found, idVendor=04d9, idProduct=1702
>> [ 5.952000] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 5.956000] usb 2-3: Product: USB Keyboard
>> [ 5.960000] usb 2-3: Manufacturer:
>> [ 6.272000] usb 2-4: new low speed USB device using ohci_hcd and address 3
>> [ 6.496000] usb 2-4: New USB device found, idVendor=0458, idProduct=003a
>> [ 6.500000] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
>> [ 6.504000] usb 2-4: Product: Optical Mouse
>> [ 6.508000] usb 2-4: Manufacturer: Genius
>> [ 6.612000] input: USB Keyboard as
>> /devices/pci0000:00/0000:00:0e.4/usb2/2-3/2-3:1.0/input/input0
>> [ 6.628000] generic-usb 0003:04D9:1702.0001: input,hidraw0: USB HID
>> v1.10 Keyboard [ USB Keyboard] on usb-0000:00:0e.4-3/input0
>> [ 6.652000] usbcore: registered new interface driver usbserial_generic
>> [ 6.656000] usbserial: USB Serial Driver core
>> [ 6.684000] input: USB Keyboard as
>> /devices/pci0000:00/0000:00:0e.4/usb2/2-3/2-3:1.1/input/input1
>> [ 6.704000] generic-usb 0003:04D9:1702.0002: input,hidraw1: USB HID
>> v1.10 Device [ USB Keyboard] on usb-0000:00:0e.4-3/input1
>> [ 6.736000] input: Genius Optical Mouse as
>> /devices/pci0000:00/0000:00:0e.4/usb2/2-4/2-4:1.0/input/input2
>> [ 6.756000] generic-usb 0003:0458:003A.0003: input,hidraw2: USB HID
>> v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:0e.4-4/input0
>> [ 6.776000] usbcore: registered new interface driver usbhid
>> [ 6.780000] usbhid: USB HID core driver
>> [ 7.768000] USB Serial support registered for GSM modem (1-port)
>> [ 7.888000] usbcore: registered new interface driver option
>> [ 7.892000] option: v0.7.2:USB Driver for GSM modems
>> [ 9.228000] Adding 3903744k swap on /dev/sda5. Priority:-1
>> extents:1 across:3903744k
>> [ 10.120000] EXT3-fs (sda6): using internal journal
>> [ 10.476000] loop: module loaded
>> [ 10.712000] fuse init (API version 7.15)
>> [ 15.388000] EXT3-fs: barriers not enabled
>> [ 15.404000] kjournald starting. Commit interval 5 seconds
>> [ 15.412000] EXT3-fs (sda1): using internal journal
>> [ 15.416000] EXT3-fs (sda1): mounted filesystem with ordered data mode
>> [ 15.528000] EXT3-fs: barriers not enabled
>> [ 15.548000] kjournald starting. Commit interval 5 seconds
>> [ 15.552000] EXT3-fs (sda7): using internal journal
>> [ 15.556000] EXT3-fs (sda7): mounted filesystem with ordered data mode
>> [ 15.672000] EXT3-fs: barriers not enabled
>> [ 15.688000] kjournald starting. Commit interval 5 seconds
>> [ 15.692000] EXT3-fs (sda8): using internal journal
>> [ 15.696000] EXT3-fs (sda8): mounted filesystem with ordered data mode
>> [ 15.776000] EXT3-fs: barriers not enabled
>> [ 15.792000] kjournald starting. Commit interval 5 seconds
>> [ 15.800000] EXT3-fs (sda9): using internal journal
>> [ 15.804000] EXT3-fs (sda9): mounted filesystem with ordered data mode
>> [ 15.884000] EXT3-fs: barriers not enabled
>> [ 15.896000] kjournald starting. Commit interval 5 seconds
>> [ 15.900000] EXT3-fs (sda10): using internal journal
>> [ 15.904000] EXT3-fs (sda10): mounted filesystem with ordered data mode
>> [ 15.968000] EXT3-fs: barriers not enabled
>> [ 15.984000] kjournald starting. Commit interval 5 seconds
>> [ 15.988000] EXT3-fs (sda11): using internal journal
>> [ 15.992000] EXT3-fs (sda11): mounted filesystem with ordered data mode
>> [ 16.076000] EXT3-fs: barriers not enabled
>> [ 16.096000] kjournald starting. Commit interval 5 seconds
>> [ 16.100000] EXT3-fs (sda12): using internal journal
>> [ 16.104000] EXT3-fs (sda12): mounted filesystem with ordered data mode
>> [ 16.216000] EXT3-fs: barriers not enabled
>> [ 16.240000] kjournald starting. Commit interval 5 seconds
>> [ 16.244000] EXT3-fs (sda13): using internal journal
>> [ 16.248000] EXT3-fs (sda13): mounted filesystem with ordered data mode
>> [ 16.352000] EXT3-fs: barriers not enabled
>> [ 16.372000] kjournald starting. Commit interval 5 seconds
>> [ 16.376000] EXT3-fs (sda14): using internal journal
>> [ 16.380000] EXT3-fs (sda14): mounted filesystem with ordered data mode
>> [ 17.404000] r8169 0000:00:06.0: eth0: link up
>> [ 30.188000] NET: Registered protocol family 10
>> [ 30.196000] lo: Disabled Privacy Extensions
>> [ 40.640000] eth0: no IPv6 routers present
>> [ 68.076000] usb 1-1: new high speed USB device using ehci_hcd and address 4
>> [ 68.220000] usb 1-1: New USB device found, idVendor=0b95, idProduct=7720
>> [ 68.220000] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
>> [ 68.220000] usb 1-1: Product: AX88772
>> [ 68.220000] usb 1-1: Manufacturer: ASIX Elec. Corp.
>> [ 68.220000] usb 1-1: SerialNumber: 000001
>> [ 69.164000] asix 1-1:1.0: eth1: register 'asix' at
>> usb-0000:00:0e.5-1, ASIX AX88772 USB 2.0 Ethernet, 00:50:b6:08:1c:5f
>> [ 69.164000] usbcore: registered new interface driver asix
>> [ 173.484000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>> [ 173.620000] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
>> [ 184.120000] eth1: no IPv6 routers present
>> [ 593.268000] ehci_hcd 0000:00:0e.5: force halt; handshake
>> 9000000050071014 00004000 00000000 -> -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: can't reschedule qh
>> 98000000bc2d5200, err -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: force halt; handshake
>> 9000000050071014 00004000 00004000 -> -145
>> [ 593.268000] ehci_hcd 0000:00:0e.5: HC died; cleaning up
>> [ 593.272000] usb 1-1: USB disconnect, address 4
>> [ 593.280000] asix 1-1:1.0: eth1: unregister 'asix'
>> usb-0000:00:0e.5-1, ASIX AX88772 USB 2.0 Ethernet
>> [ 638.768000] r8169 0000:00:06.0: eth0: link up
>> [ 649.008000] eth0: no IPv6 routers present
>> [ 936.700000] ioctl32(Xorg:4238): Unknown cmd fd(8)
>> cmd(8004f300){t:'�';sz:4} arg(7f7f9d64) on /dev/fb0
>> [ 936.700000] ioctl32(Xorg:4238): Unknown cmd fd(8)
>> cmd(80046ef8){t:'n';sz:4} arg(007a1920) on /dev/fb0
>> [ 936.704000] sisfb 0000:00:08.0: Invalid ROM contents
>> [ 1015.748000] snd-malloc: invalid device type 0
>>
>> ** Model information
>> system type : lemote-fuloong-2f-box
>> cpu model : ICT Loongson-2 V0.3 FPU V0.1
>>
>> ** Loaded modules:
>> Module Size Used by
>> asix 18116 0
>> usbnet 19082 1 asix
>> ipv6 372239 14
>> cpufreq_userspace 2144 0
>> cpufreq_conservative 10876 0
>> cpufreq_stats 3064 0
>> cpufreq_powersave 1094 0
>> autofs4 28456 2
>> fuse 78107 1
>> loop 18822 0
>> option 16642 0
>> evdev 12121 2
>> usb_wwan 11359 1 option
>> usbhid 45527 0
>> hid 88104 1 usbhid
>> usbserial 35706 2 option,usb_wwan
>> snd_cs5535audio 11875 0
>> snd_ac97_codec 132979 1 snd_cs5535audio
>> ac97_bus 1294 1 snd_ac97_codec
>> snd_pcm 89131 2 snd_cs5535audio,snd_ac97_codec
>> snd_seq 64184 0
>> ohci_hcd 25184 0
>> ehci_hcd 45107 0
>> snd_timer 23423 2 snd_pcm,snd_seq
>> snd_seq_device 7061 1 snd_seq
>> usbcore 175295 9
>> asix,usbnet,option,usb_wwan,usbhid,usbserial,ohci_hcd,ehci_hcd
>> snd 73711 6
>> snd_cs5535audio,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
>> r8169 40348 0
>> loongson2_cpufreq 2843 0
>> soundcore 5903 1 snd
>> loongson2_clock 2568 1 loongson2_cpufreq
>> mii 4730 3 asix,usbnet,r8169
>> rtc_cmos 8329 0
>> nls_base 7329 1 usbcore
>> snd_page_alloc 7053 2 snd_cs5535audio,snd_pcm
>>
>> ** Network interface configuration:
>>
>> auto lo
>> iface lo inet loopback
>>
>> auto eth0
>> allow-hotplug eth0
>> iface eth0 inet static
>> pre-up /sbin/ethtool -K eth0 rx off
>> address 192.168.2.115
>> netmask 255.255.255.0
>> network 192.168.2.0
>> broadcast 192.168.2.255
>> gateway 192.168.2.1
>> dns-nameservers 200.91.75.5 200.91.75.6 192.168.2.1
>> dns-search local
>>
>> iface eth1 inet static
>> address 192.168.2.115
>> netmask 255.255.255.0
>> network 192.168.2.0
>> broadcast 192.168.2.255
>> gateway 192.168.2.1
>> dns-nameservers 200.91.75.5 200.91.75.6 192.168.2.1
>> dns-search local
>>
>> ** Network status:
>> *** IP interfaces and addresses:
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>> inet 127.0.0.1/8 scope host lo
>> inet6 ::1/128 scope host
>> valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UNKNOWN qlen 1000
>> link/ether 00:23:9e:00:04:b6 brd ff:ff:ff:ff:ff:ff
>> inet 192.168.2.115/24 brd 192.168.2.255 scope global eth0
>> inet6 fe80::223:9eff:fe00:4b6/64 scope link
>> valid_lft forever preferred_lft forever
>>
>> *** Device statistics:
>> Inter-| Receive | Transmit
>> face |bytes packets errs drop fifo frame compressed
>> multicast|bytes packets errs drop fifo colls carrier compressed
>> lo: 560 8 0 0 0 0 0 0
>> 560 8 0 0 0 0 0 0
>> eth0: 611120 891 0 0 0 0 0 0
>> 226227 971 0 0 0 0 0 0
>>
>> *** Protocol statistics:
>> Ip:
>> 11717 total packets received
>> 0 forwarded
>> 0 incoming packets discarded
>> 11717 incoming packets delivered
>> 7920 requests sent out
>> 36 dropped because of missing route
>> Icmp:
>> 27 ICMP messages received
>> 0 input ICMP message failed.
>> ICMP input histogram:
>> destination unreachable: 1
>> echo replies: 26
>> 26 ICMP messages sent
>> 0 ICMP messages failed
>> ICMP output histogram:
>> echo request: 26
>> IcmpMsg:
>> InType0: 26
>> InType3: 1
>> OutType8: 26
>> Tcp:
>> 33 active connections openings
>> 0 passive connection openings
>> 0 failed connection attempts
>> 1 connection resets received
>> 4 connections established
>> 11570 segments received
>> 7772 segments send out
>> 2 segments retransmited
>> 0 bad segments received.
>> 4 resets sent
>> Udp:
>> 120 packets received
>> 0 packets to unknown port received.
>> 0 packet receive errors
>> 120 packets sent
>> UdpLite:
>> TcpExt:
>> 8 TCP sockets finished time wait in fast timer
>> 55 delayed acks sent
>> 8902 packet headers predicted
>> 127 acknowledgments not containing data payload received
>> 16 predicted acknowledgments
>> 2 retransmits in slow start
>> 1 connections reset due to early user close
>> TCPSackShiftFallback: 1
>> IpExt:
>> InOctets: 16652854
>> OutOctets: 640001
>>
>> *** Device features:
>> eth0: 0x180
>> lo: 0x13865
>>
>> ** PCI devices:
>> 00:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
>> RTL-8169 Gigabit Ethernet [10ec:8169] (rev 10)
>> Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family
>> PCI Gigabit Ethernet NIC [10ec:8169]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
>> ParErr+ Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 36
>> Region 0: I/O ports at 4000 [size=256]
>> Region 1: Memory at 50072000 (32-bit, non-prefetchable) [size=256]
>> Expansion ROM at 50040000 [size=128K]
>> Capabilities: <access denied>
>> Kernel driver in use: r8169
>>
>> 00:08.0 VGA compatible controller [0300]: Silicon Integrated Systems
>> [SiS] 315PRO PCI/AGP VGA Display Adapter [1039:0325] (prog-if 00 [VGA
>> controller])
>> Subsystem: Device [3030:3030]
>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>> >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 71 (750ns min, 4000ns max)
>> Interrupt: pin A routed to IRQ 38
>> BIST result: 00
>> Region 0: Memory at 40000000 (32-bit, prefetchable) [size=256M]
>> Region 1: Memory at 50000000 (32-bit, non-prefetchable) [size=256K]
>> Region 2: I/O ports at 4800 [size=128]
>> Expansion ROM at 50060000 [size=64K]
>> Capabilities: <access denied>
>> Kernel driver in use: sisfb
>>
>> 00:0e.0 ISA bridge [0601]: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] ISA [1022:2090] (rev 03)
>> Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] ISA [1022:2090]
>> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Region 0: I/O ports at 4cf0 [size=8]
>> Region 1: I/O ports at 4400 [size=256]
>> Region 2: I/O ports at 4c80 [size=64]
>> Region 4: I/O ports at 4880 [size=128]
>> Region 5: I/O ports at 4cc0 [size=32]
>>
>> 00:0e.2 IDE interface [0101]: Advanced Micro Devices [AMD] CS5536
>> [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
>> Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] IDE [1022:209a]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 64 (16000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 14
>> Region 0: [virtual] Memory at 000001f0 (32-bit,
>> non-prefetchable) [size=8]
>> Region 1: [virtual] Memory at 000003f0 (type 3,
>> non-prefetchable) [size=1]
>> Region 2: [virtual] Memory at 00000170 (32-bit,
>> non-prefetchable) [size=8]
>> Region 3: [virtual] Memory at 00000370 (type 3,
>> non-prefetchable) [size=1]
>> Region 4: I/O ports at 4ce0 [size=16]
>> Kernel driver in use: pata_amd
>>
>> 00:0e.3 Multimedia audio controller [0401]: Advanced Micro Devices
>> [AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
>> Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] Audio [1022:2093]
>> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (16000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 9
>> Region 0: I/O ports at 4c00 [size=128]
>> Kernel driver in use: cs5535audio
>>
>> 00:0e.4 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
>> [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
>> Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] OHC [1022:2094]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (16000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at 50070000 (32-bit, non-prefetchable) [size=4K]
>> Kernel driver in use: ohci_hcd
>>
>> 00:0e.5 USB Controller [0c03]: Advanced Micro Devices [AMD] CS5536
>> [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
>> Subsystem: Advanced Micro Devices [AMD] CS5536 [Geode
>> companion] EHC [1022:2095]
>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>> ParErr- Stepping- SERR- FastB2B- DisINTx-
>> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>> Latency: 0 (16000ns max), Cache Line Size: 32 bytes
>> Interrupt: pin A routed to IRQ 11
>> Region 0: Memory at 50071000 (32-bit, non-prefetchable) [size=4K]
>> Kernel driver in use: ehci_hcd
>>
>>
>> ** USB devices:
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>> Bus 002 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc.
>> Bus 002 Device 003: ID 0458:003a KYE Systems Corp. (Mouse Systems)
>> NetScroll+ Mini Traveler / Genius NetScroll 120
>>
>>
>> -- System Information:
>> Debian Release: wheezy/sid
>> APT prefers unstable
>> APT policy: (500, 'unstable')
>> Architecture: mipsel (mips64)
>>
>> Kernel: Linux 2.6.37-1-loongson-2f
>> Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
>> Shell: /bin/sh linked to /bin/dash
>>
>> Versions of packages linux-image-2.6.37-1-loongson-2f depends on:
>> ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
>> ii linux-base 2.6.37-1 Linux image base package
>> ii module-init-tools 3.12-1 tools for managing Linux kernel mo
>>
>> Versions of packages linux-image-2.6.37-1-loongson-2f recommends:
>> ii firmware-linux-free 2.6.37-1 Binary firmware for various driver
>>
>> Versions of packages linux-image-2.6.37-1-loongson-2f suggests:
>> pn linux-doc-2.6.37 <none> (no description available)
>>
>> Versions of packages linux-image-2.6.37-1-loongson-2f is related to:
>> pn firmware-bnx2 <none> (no description available)
>> pn firmware-bnx2x <none> (no description available)
>> pn firmware-ipw2x00 <none> (no description available)
>> pn firmware-ivtv <none> (no description available)
>> pn firmware-iwlwifi <none> (no description available)
>> ii firmware-linux 0.28 Binary firmware for various driver
>> ii firmware-linux-nonfree 0.28 Binary firmware for various driver
>> pn firmware-qlogic <none> (no description available)
>> pn firmware-ralink <none> (no description available)
>> pn xen-hypervisor <none> (no description available)
>>
>> -- debconf information:
>> * linux-image-2.6.37-1-loongson-2f/postinst/ignoring-do-bootloader-2.6.37-1-loongson-2f:
>> linux-image-2.6.37-1-loongson-2f/postinst/depmod-error-initrd-2.6.37-1-loongson-2f:
>> false
>> linux-image-2.6.37-1-loongson-2f/postinst/missing-firmware-2.6.37-1-loongson-2f:
>> linux-image-2.6.37-1-loongson-2f/prerm/removing-running-kernel-2.6.37-1-loongson-2f:
>> true
>>
>>
>> Thanks,
>>
>> --
>> Javier.
>>
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-kernel-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> Archive: [🔎] AANLkTikuX2_GoG10Fk1eXCwwoZodjcgeaO2r+=Naq9bM@mail.gmail.com">http://lists.debian.org/[🔎] AANLkTikuX2_GoG10Fk1eXCwwoZodjcgeaO2r+=Naq9bM@mail.gmail.com
>
> --
> Martin Michlmayr
> http://www.cyrius.com/
>
Reply to: