Bug#606763: marked as done (linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off)

To: Axel Beckert <abe@debian.org>
Subject: Bug#606763: marked as done (linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off)
From: owner@bugs.debian.org (Debian Bug Tracking System)
Date: Sun, 27 Feb 2011 18:21:07 +0000
Message-id: <[🔎] handler.606763.D606763.129883081122718.ackdone@bugs.debian.org>
References: <20110227182006.GY12557@sym.noone.org> <87r5dotkbt.fsf@nemo.deuxchevaux.org>

Your message dated Sun, 27 Feb 2011 19:20:06 +0100
with message-id <20110227182006.GY12557@sym.noone.org>
and subject line Re: Bug#606763: linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off
has caused the Debian Bug report #606763,
regarding linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
606763: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606763
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

To: Debian Bug Tracking System <submit@bugs.debian.org>
Subject: linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off
From: Axel Beckert <abe@debian.org>
Date: Sat, 11 Dec 2010 16:12:22 +0100
Message-id: <87r5dotkbt.fsf@nemo.deuxchevaux.org>

Package: linux-2.6
Version: 2.6.37~rc5-1~experimental.1
Severity: important
User: debian-eeepc-devel@lists.alioth.debian.org
Usertags: 701

The following did not happen with the 2.6.36 experimental kernel
packages, but does happen reproducibly with the new 2.6.37 package on my
ASUS EeePC 4G 701.

I'm running xscreensaver (5.11-1+b1) and it is configured to set the
display to standby after 10 Minutes and to suspend after 20
minutes. After approximately 10-20 minutes (i.e. after switching to
standby mode or switching to suspend mode -- will debiug it further),
the screen was blank and without backlight as expected, but neither
moving the mouse nor hitting a key on the keyboard (not even switching
to a virtual console with Ctrl-Alt-F1) changed something and it stayed
dark.

But pressing the EeePC's power button cleanly shuts down the computer,
so the system does not hang, just the screen doesn't come back to live
until I power cycle it (and then the first thing I see again are BIOS
messages). Since I'm currently not at home, I don't have a second
machine to ssh into the EeePC and look what's going on in detail.

-- Package-specific info:

** Kernel log: boot messages should be attached

** Model information
not available

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at ec00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82a1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 41
	Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 7f900000-7fafffff
	Prefetchable memory behind bridge: 000000007fb00000-000000007fcfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fbf00000-fbffffff
	Prefetchable memory behind bridge: 000000007fd00000-000000007fefffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f8000000-fbefffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at e880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
	Subsystem: AzureWave AR5007EG 802.11bg Wi-Fi mini PCI express card [1a3b:1026]
	Physical Slot: eeepc-wifi
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k

03:00.0 Ethernet controller [0200]: Atheros Communications L2 Fast Ethernet [1969:2048] (rev a0)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 40
	Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at fbfa0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: atl2


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam
Bus 001 Device 002: ID 0951:1606 Kingston Technology 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (990, 'unstable'), (600, 'stable'), (500, 'testing'), (110, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.36-trunk-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.37-rc5-686 depends on:
ii  cdebconf [de 0.152                       Debian Configuration Management Sy
ii  debconf [deb 1.5.37                      Debian configuration management sy
ii  initramfs-to 0.98.5                      tools for generating an initramfs
ii  linux-base   2.6.37~rc5-1~experimental.1 Linux image base package
ii  module-init- 3.12-1                      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.37-rc5-686 recommends:
ii  firmware-linux-free           2.6.32-29  Binary firmware for various driver
ii  libc6-i686                    2.11.2-7   Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.37-rc5-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.37              <none>     (no description available)

Versions of packages linux-image-2.6.37-rc5-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.37-rc5-686/postinst/ignoring-do-bootloader-2.6.37-rc5-686:
  linux-image-2.6.37-rc5-686/prerm/removing-running-kernel-2.6.37-rc5-686: true
  linux-image-2.6.37-rc5-686/postinst/depmod-error-initrd-2.6.37-rc5-686: false
  linux-image-2.6.37-rc5-686/postinst/missing-firmware-2.6.37-rc5-686:

--- End Message ---

--- Begin Message ---

To: 606763-done@bugs.debian.org
Subject: Re: Bug#606763: linux-image-2.6.37-rc5-686: Screen stays blank on EeePC 701 after xscreensaver turned screen off
From: Axel Beckert <abe@debian.org>
Date: Sun, 27 Feb 2011 19:20:06 +0100
Message-id: <20110227182006.GY12557@sym.noone.org>
In-reply-to: <87r5dotkbt.fsf@nemo.deuxchevaux.org>
References: <87r5dotkbt.fsf@nemo.deuxchevaux.org>

Version: 2.6.38~rc6-1~experimental.1

Axel Beckert wrote:
> The following did not happen with the 2.6.36 experimental kernel
> packages, but does happen reproducibly with the new 2.6.37 package on my
> ASUS EeePC 4G 701.
> 
> I'm running xscreensaver (5.11-1+b1) and it is configured to set the
> display to standby after 10 Minutes and to suspend after 20
> minutes. After approximately 10-20 minutes (i.e. after switching to
> standby mode or switching to suspend mode -- will debiug it further),
> the screen was blank and without backlight as expected, but neither
> moving the mouse nor hitting a key on the keyboard (not even switching
> to a virtual console with Ctrl-Alt-F1) changed something and it stayed
> dark.

This does no more happen with 2.6.38 in experimental.

		Regards, Axel
-- 
 ,''`.  |  Axel Beckert <abe@debian.org>, http://people.debian.org/~abe/
: :' :  |  Debian Developer, ftp.ch.debian.org Admin
`. `'   |  1024D: F067 EA27 26B9 C3FC 1486  202E C09E 1D89 9593 0EDE
  `-    |  4096R: 2517 B724 C5F6 CA99 5329  6E61 2FF9 CD59 6126 16B5

--- End Message ---

Reply to:

Prev by Date: Bug#615609: linux-image-2.6.37-1-loongson-2: Lemote mini-pc with linux-image-2.6.37-1-loongson-2 doesn't support external usb NIC (TU2-ET100)
Next by Date: Bug#614593: Please add new armel kernel flavour for the Marvell DB-78x00-BP Development Board
Previous by thread: Bug#615609: linux-image-2.6.37-1-loongson-2: Lemote mini-pc with linux-image-2.6.37-1-loongson-2 doesn't support external usb NIC (TU2-ET100)
Next by thread: Bug#613078: marked as done (xserver-xorg-video-nouveau: corrupted graphics on GeForce 6150SE nForce 430)
Index(es):
- Date
- Thread