Bug#586494: linux-image-2.6.26-2-686: Dell PowerEdge 4200's don't work with 2.6.26
> BTW, I also attached the dmesg for 2.6.26 working just
> for reference to anyone else who might stumble upon this bug, and for
> your curiosity as well.
ooops, forgot the attachement. Attached as promised!
troubled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-22lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 12 21:56:10 UTC 2010
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00fdbd0] 000fdbd0
[ 0.000000] Entering add_active_range(0, 0, 131072) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131072
[ 0.000000] HighMem 131072 -> 131072
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131072
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125984 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI not present or invalid.
[ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080321]
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: DELL Product ID: POWEREDGE <6>MPTABLE: Product ID: POWEREDGE <6>MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #1 (Bootup-CPU)
[ 0.000000] Processor #0
[ 0.000000] Unknown bustype EISA - ignoring
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 2
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=/dev/md1 ro vga=787 console=tty0 console=ttyS0 noapic
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 299.160 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console [ttyS0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 508484k/524288k available (1771k kernel code, 15264k reserved, 750k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02bad7d - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02bad7d (1771 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.085074] Calibrating delay using timer specific routine.. 600.09 BogoMIPS (lpj=1200192)
[ 0.096006] Security Framework initialized
[ 0.100006] SELinux: Disabled at boot.
[ 0.104006] Capability LSM initialized
[ 0.108006] Mount-cache hash table entries: 512
[ 0.112007] Initializing cgroup subsys ns
[ 0.116007] Initializing cgroup subsys cpuacct
[ 0.120007] Initializing cgroup subsys devices
[ 0.124007] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.132008] CPU: L2 cache: 512K
[ 0.136008] Intel machine check architecture supported.
[ 0.140008] Intel machine check reporting enabled on CPU#0.
[ 0.144009] Checking 'hlt' instruction... OK.
[ 0.172010] ACPI: Core revision 20080321
[ 0.176011] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080321]
[ 0.188011] ACPI: Unable to load the System Description Tables
[ 0.192012] CPU0: Intel Pentium II (Klamath) stepping 04
[ 0.316019] Booting processor 1/0 ip 6000
[ 0.348021] Initializing CPU#1
[ 0.348021] Calibrating delay using timer specific routine.. 598.37 BogoMIPS (lpj=1196754)
[ 0.348021] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.348021] CPU: L2 cache: 512K
[ 0.348021] Intel machine check architecture supported.
[ 0.348021] Intel machine check reporting enabled on CPU#1.
[ 0.428026] CPU1: Intel Pentium II (Klamath) stepping 04
[ 0.444027] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.448028] Brought up 2 CPUs
[ 0.452028] Total of 2 processors activated (1198.47 BogoMIPS).
[ 0.456028] CPU0 attaching sched-domain:
[ 0.456028] domain 0: span 0-1
[ 0.456028] groups: 0 1
[ 0.456028] CPU1 attaching sched-domain:
[ 0.456028] domain 0: span 0-1
[ 0.456028] groups: 1 0
[ 0.456028] net_namespace: 660 bytes
[ 0.460028] Booting paravirtualized kernel on bare hardware
[ 0.464029] NET: Registered protocol family 16
[ 0.499021] PCI: PCI BIOS revision 2.10 entry at 0xf80cd, last bus=1
[ 0.504031] PCI: Using configuration type 1 for base access
[ 0.508031] Setting up standard PCI resources
[ 0.516031] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.520031] mtrr: probably your BIOS does not setup all CPUs.
[ 0.524031] mtrr: corrected configuration.
[ 0.536031] ACPI: Interpreter disabled.
[ 0.540031] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.544031] pnp: PnP ACPI: disabled
[ 0.548031] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.552031] PnPBIOS: Found PnP BIOS installation structure at 0xc00fdba0
[ 0.556031] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x4e4a, dseg 0xf0000
[ 0.568031] PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
[ 0.572032] PCI: Probing PCI hardware
[ 0.576031] PCI: Probing PCI hardware (bus 00)
[ 0.586885] system 00:00: iomem range 0x0-0x9ff could not be reserved
[ 0.592046] system 00:00: iomem range 0xf00-0xfff could not be reserved
[ 0.740377] system 00:01: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 0.906121] system 00:0f: ioport range 0x400-0x407 has been reserved
[ 1.046348] system 00:0f: ioport range 0x40a-0x40c has been reserved
[ 1.190470] system 00:0f: ioport range 0x410-0x43f has been reserved
[ 1.330597] system 00:0f: ioport range 0x461-0x462 has been reserved
[ 1.470748] system 00:0f: ioport range 0x464-0x465 has been reserved
[ 1.610854] system 00:0f: ioport range 0x481-0x48b has been reserved
[ 1.750975] system 00:0f: ioport range 0x4c6-0x4c6 has been reserved
[ 1.891103] system 00:0f: ioport range 0x4ca-0x4ca has been reserved
[ 2.031232] system 00:0f: ioport range 0x4ce-0x4ce has been reserved
[ 2.171360] system 00:0f: ioport range 0x4d0-0x4d1 has been reserved
[ 2.311488] system 00:0f: ioport range 0x4d4-0x4d6 has been reserved
[ 2.451616] system 00:0f: ioport range 0x4e0-0x4ef has been reserved
[ 2.591742] system 00:0f: ioport range 0x4f4-0x4ff has been reserved
[ 2.731869] system 00:0f: ioport range 0xc80-0xc84 has been reserved
[ 2.872044] system 00:10: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 3.037704] system 00:10: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 3.212023] PCI: Bridge: 0000:00:0d.0
[ 3.295179] IO window: e000-efff
[ 3.363943] MEM window: 0xfde00000-0xfdefffff
[ 3.462237] PREFETCH window: 0x0000000030000000-0x00000000300fffff
[ 3.602635] NET: Registered protocol family 2
[ 3.711629] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 3.866941] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.033992] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 4.195737] TCP: Hash tables configured (established 65536 bind 65536)
[ 4.340879] TCP reno registered
[ 4.414966] NET: Registered protocol family 1
[ 4.505341] checking if image is initramfs... it is
[ 9.656290] Freeing initrd memory: 7425k freed
[ 9.762015] audit: initializing netlink socket (disabled)
[ 9.883172] type=2000 audit(1277099783.962:1): initialized
[ 10.004967] Total HugeTLB memory allocated, 0
[ 10.103078] VFS: Disk quotas dquot_6.5.1
[ 10.186839] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 10.329743] msgmni has been set to 1007
[ 10.416108] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 10.581666] io scheduler noop registered
[ 10.664649] io scheduler anticipatory registered
[ 10.763978] io scheduler deadline registered
[ 10.855258] io scheduler cfq registered (default)
[ 10.955795] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 11.086891] pci 0000:00:14.0: Boot video device
[ 11.091995] vesafb: framebuffer at 0xfc000000, mapped to 0xe0800000, using 1024k, total 1024k
[ 11.287695] vesafb: mode is 800x600x16, linelength=1600, pages=0
[ 11.419632] vesafb: protected mode interface info at c000:468c
[ 11.545520] vesafb: pmi: set display start = c00c471a, set palette = c00c4782
[ 11.706999] vesafb: pmi: ports = f485 f41f f4b4 f4b8 f418 f414 f4c0 f4c3 f4c1
[ 11.819557] vesafb: scrolling: redraw
[ 11.900639] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0
[ 12.051387] Clocksource tsc unstable (delta = 1189380432 ns)
[ 12.067835] Console: switching to colour frame buffer device 100x37
[ 12.117137] fb0: VESA VGA frame buffer device
[ 12.121137] isapnp: Scanning for PnP cards...
[ 12.436941] isapnp: No Plug & Play device found
[ 12.469137] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 12.473137] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.481137] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 12.485137] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 12.493137] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 12.513137] brd: module loaded
[ 12.517137] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 12.523263] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 12.529137] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 12.537137] mice: PS/2 mouse device common for all mice
[ 12.541137] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 12.545137] rtc0: alarms up to one day
[ 12.549137] cpuidle: using governor ladder
[ 12.553137] cpuidle: using governor menu
[ 12.557137] No iBFT detected.
[ 12.565137] TCP cubic registered
[ 12.569137] NET: Registered protocol family 17
[ 12.573137] Using IPI No-Shortcut mode
[ 12.577137] input: AT Translated Set 2 keyboard as /class/input/input0
[ 12.677137] registered taskstats version 1
[ 12.681137] rtc_cmos 00:06: setting system clock to 2010-06-21 05:56:34 UTC (1277099794)
[ 12.685137] Freeing unused kernel memory: 244k freed
[ 13.707447] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 15.095009] 3c59x: Donald Becker and others.
[ 15.102015] 0000:00:13.0: 3Com PCI 3c905B Cyclone 100baseTx at e090cc00.
[ 15.129558] Floppy drive(s): fd0 is 1.44M
[ 15.237265] FDC 0 is a National Semiconductor PC87306
[ 15.320243] SCSI subsystem initialized
[ 30.435244] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 30.435262] <Adaptec aic7880 Ultra SCSI adapter>
[ 30.435273] aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
[ 30.435285]
[ 30.453149] scsi 0:0:0:0: Direct-Access SEAGATE ST19171W 2224 PQ: 0 ANSI: 2
[ 30.583557] scsi0:A:0:0: Tagged Queuing enabled. Depth 8
[ 30.673142] target0:0:0: Beginning Domain Validation
[ 30.762984] target0:0:0: wide asynchronous
[ 30.775520] target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 30.782938] target0:0:0: Domain Validation skipping write tests
[ 30.788021] target0:0:0: Ending Domain Validation
[ 30.807468] scsi 0:0:1:0: Direct-Access SEAGATE ST19171W 2224 PQ: 0 ANSI: 2
[ 30.811989] scsi0:A:1:0: Tagged Queuing enabled. Depth 8
[ 30.819989] target0:0:1: Beginning Domain Validation
[ 30.830829] target0:0:1: wide asynchronous
[ 30.841040] target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 30.851989] target0:0:1: Domain Validation skipping write tests
[ 30.855989] target0:0:1: Ending Domain Validation
[ 30.871060] scsi 0:0:2:0: Direct-Access SEAGATE ST19171W 2224 PQ: 0 ANSI: 2
[ 30.875989] scsi0:A:2:0: Tagged Queuing enabled. Depth 8
[ 30.883989] target0:0:2: Beginning Domain Validation
[ 30.894823] target0:0:2: wide asynchronous
[ 30.902486] target0:0:2: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 30.910968] target0:0:2: Domain Validation skipping write tests
[ 30.916026] target0:0:2: Ending Domain Validation
[ 30.929487] scsi 0:0:3:0: Direct-Access SEAGATE ST19171W 2224 PQ: 0 ANSI: 2
[ 30.936026] scsi0:A:3:0: Tagged Queuing enabled. Depth 8
[ 30.944026] target0:0:3: Beginning Domain Validation
[ 30.954373] target0:0:3: wide asynchronous
[ 30.963644] target0:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 30.972591] target0:0:3: Domain Validation skipping write tests
[ 30.977618] target0:0:3: Ending Domain Validation
[ 30.992678] scsi 0:0:4:0: Direct-Access SEAGATE ST19171W 2224 PQ: 0 ANSI: 2
[ 30.997618] scsi0:A:4:0: Tagged Queuing enabled. Depth 8
[ 31.005618] target0:0:4: Beginning Domain Validation
[ 31.014450] target0:0:4: wide asynchronous
[ 31.026366] target0:0:4: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 31.034841] target0:0:4: Domain Validation skipping write tests
[ 31.039900] target0:0:4: Ending Domain Validation
[ 31.056959] scsi 0:0:5:0: Direct-Access SEAGATE SX118273LC 6367 PQ: 0 ANSI: 2
[ 31.063900] scsi0:A:5:0: Tagged Queuing enabled. Depth 8
[ 31.071900] target0:0:5: Beginning Domain Validation
[ 31.082934] target0:0:5: wide asynchronous
[ 31.092573] target0:0:5: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 31.100573] target0:0:5: Domain Validation skipping write tests
[ 31.104573] target0:0:5: Ending Domain Validation
[ 31.124350] scsi 0:0:6:0: Processor DELL 6UW BACKPLANE 9 PQ: 0 ANSI: 2
[ 31.128573] target0:0:6: Beginning Domain Validation
[ 31.156113] target0:0:6: Ending Domain Validation
[ 45.600663] scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
[ 45.600678] <Adaptec aic7860 Ultra SCSI adapter>
[ 45.600689] aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
[ 45.600700]
[ 45.952346] Driver 'sd' needs updating - please use bus_type methods
[ 46.053310] target0:0:0: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 46.131597] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 46.174137] sd 0:0:0:0: [sda] 17783112 512-byte hardware sectors (9105 MB)
[ 46.176360] sd 0:0:0:0: [sda] Write Protect is off
[ 46.176386] sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08
[ 46.178544] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 46.180196] sd 0:0:0:0: [sda] 17783112 512-byte hardware sectors (9105 MB)
[ 46.182232] sd 0:0:0:0: [sda] Write Protect is off
[ 46.182257] sd 0:0:0:0: [sda] Mode Sense: 9f 00 10 08
[ 46.184393] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 46.184441] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 46.970334] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[ 46.970334] sd 0:0:0:0: [sda] Attached SCSI disk
[ 46.971987] target0:0:1: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 46.973612] scsi 1:0:3:0: Sequential-Access ARCHIVE Python 04106-XXX 7550 PQ: 0 ANSI: 2
[ 46.973698] target1:0:3: Beginning Domain Validation
[ 46.974523] sd 0:0:1:0: [sdb] 17783112 512-byte hardware sectors (9105 MB)
[ 46.976560] sd 0:0:1:0: [sdb] Write Protect is off
[ 46.976583] sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08
[ 46.978736] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 46.980301] sd 0:0:1:0: [sdb] 17783112 512-byte hardware sectors (9105 MB)
[ 46.982360] sd 0:0:1:0: [sdb] Write Protect is off
[ 46.982386] sd 0:0:1:0: [sdb] Mode Sense: 9f 00 10 08
[ 46.984545] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 46.984586] sdb:<6> target1:0:3: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 46.998887] sdb1 sdb2 sdb3 sdb4 <<6> target1:0:3: Domain Validation skipping write tests
[ 47.007565] target1:0:3: Ending Domain Validation
[ 47.023837] sdb5 >
[ 48.525325] scsi 0:0:2:0: Attached scsi generic sg2 type 0
[ 48.469010] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 48.469010] target0:0:2: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 48.525325] sd 0:0:2:0: [sdc] 17783112 512-byte hardware sectors (9105 MB)
[ 48.527320] sd 0:0:2:0: [sdc] Write Protect is off
[ 48.527344] sd 0:0:2:0: [sdc] Mode Sense: 9f 00 10 08
[ 48.529505] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 48.530989] sd 0:0:2:0: [sdc] 17783112 512-byte hardware sectors (9105 MB)
[ 48.533035] sd 0:0:2:0: [sdc] Write Protect is off
[ 48.533061] sd 0:0:2:0: [sdc] Mode Sense: 9f 00 10 08
[ 48.535205] sd 0:0:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 48.535232] sdc: sdc1 sdc2
[ 49.539458] scsi 0:0:3:0: Attached scsi generic sg3 type 0
[ 49.555983] sd 0:0:2:0: [sdc] Attached SCSI disk
[ 49.557685] target0:0:3: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 49.569747] sd 0:0:3:0: [sdd] 17783112 512-byte hardware sectors (9105 MB)
[ 49.571802] sd 0:0:3:0: [sdd] Write Protect is off
[ 49.571828] sd 0:0:3:0: [sdd] Mode Sense: 9f 00 10 08
[ 49.573938] sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 49.575565] sd 0:0:3:0: [sdd] 17783112 512-byte hardware sectors (9105 MB)
[ 49.577609] sd 0:0:3:0: [sdd] Write Protect is off
[ 49.577635] sd 0:0:3:0: [sdd] Mode Sense: 9f 00 10 08
[ 49.579799] sd 0:0:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 49.579828] sdd: sdd1 sdd2
[ 50.582232] scsi 0:0:4:0: Attached scsi generic sg4 type 0
[ 50.525938] sd 0:0:3:0: [sdd] Attached SCSI disk
[ 50.582874] target0:0:4: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 50.597001] sd 0:0:4:0: [sde] 17783112 512-byte hardware sectors (9105 MB)
[ 50.599044] sd 0:0:4:0: [sde] Write Protect is off
[ 50.599070] sd 0:0:4:0: [sde] Mode Sense: 9f 00 10 08
[ 50.601228] sd 0:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 50.602797] sd 0:0:4:0: [sde] 17783112 512-byte hardware sectors (9105 MB)
[ 50.604838] sd 0:0:4:0: [sde] Write Protect is off
[ 50.604864] sd 0:0:4:0: [sde] Mode Sense: 9f 00 10 08
[ 50.607022] sd 0:0:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 50.607050] sde: sde1 sde2
[ 52.053891] scsi 0:0:5:0: Attached scsi generic sg5 type 0
[ 52.054226] sd 0:0:4:0: [sde] Attached SCSI disk
[ 52.057675] target0:0:5: FAST-10 WIDE SCSI 20.0 MB/s ST (100 ns, offset 8)
[ 52.059011] scsi 1:0:5:0: CD-ROM NEC CD-ROM DRIVE:464 1.05 PQ: 0 ANSI: 2
[ 52.059099] target1:0:5: Beginning Domain Validation
[ 52.060034] sd 0:0:5:0: [sdf] 35566480 512-byte hardware sectors (18210 MB)
[ 52.062292] target1:0:5: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[ 52.062428] sd 0:0:5:0: [sdf] Write Protect is off
[ 52.062450] sd 0:0:5:0: [sdf] Mode Sense: cb 00 10 08
[ 52.064262] target1:0:5: Domain Validation skipping write tests
[ 52.064282] target1:0:5: Ending Domain Validation
[ 52.064878] sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 52.066446] sd 0:0:5:0: [sdf] 35566480 512-byte hardware sectors (18210 MB)
[ 52.068834] sd 0:0:5:0: [sdf] Write Protect is off
[ 52.068859] sd 0:0:5:0: [sdf] Mode Sense: cb 00 10 08
[ 52.071227] sd 0:0:5:0: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 52.071252] sdf: sdf1 sdf2
[ 53.741943] scsi 0:0:6:0: Attached scsi generic sg6 type 3
[ 53.541675] sd 0:0:5:0: [sdf] Attached SCSI disk
[ 53.963127] scsi 1:0:3:0: Attached scsi generic sg7 type 1
[ 54.068049] scsi 1:0:5:0: Attached scsi generic sg8 type 5
[ 54.880606] osst :I: Tape driver with OnStream support version 0.99.4
[ 54.880606] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[ 55.099418] Driver 'osst' needs updating - please use bus_type methods
[ 55.273824] Driver 'sr' needs updating - please use bus_type methods
[ 55.298838] sr0: scsi-1 drive
[ 55.306000] Uniform CD-ROM driver Revision: 3.20
[ 55.310924] sr 1:0:5:0: Attached scsi CD-ROM sr0
[ 55.318207] st: Version 20080224, fixed bufsize 32768, s/g segs 256
[ 55.419265] Driver 'st' needs updating - please use bus_type methods
[ 55.554560] st 1:0:3:0: Attached scsi tape st0
[ 55.638522] st 1:0:3:0: st0: try direct i/o: yes (alignment 4 B)
[ 56.374863] md: raid1 personality registered for level 1
[ 56.550969] md: md0 stopped.
[ 57.498389] md: bind<sdb1>
[ 57.511543] md: bind<sda1>
[ 57.607543] raid1: raid set md0 active with 2 out of 2 mirrors
[ 57.628248] md: md1 stopped.
[ 58.401607] md: bind<sdb2>
[ 58.418250] md: bind<sda2>
[ 58.514251] raid1: raid set md1 active with 2 out of 2 mirrors
[ 58.534543] md: md2 stopped.
[ 59.262784] md: bind<sdb5>
[ 59.269125] md: bind<sda5>
[ 59.361125] raid1: raid set md2 active with 2 out of 2 mirrors
[ 60.300742] device-mapper: uevent: version 1.0.3
[ 60.380723] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 60.777076] PM: Starting manual resume from disk
[ 61.086968] kjournald starting. Commit interval 5 seconds
[ 61.090969] EXT3-fs: mounted filesystem with ordered data mode.
[ 64.908433] udevd version 125 started
[ 69.245180] input: PC Speaker as /class/input/input1
[ 71.047589] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 71.080377] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 71.236657] logips2pp: Detected unknown logitech mouse model 32
[ 71.386318] Error: Driver 'pcspkr' is already registered, aborting...
[ 71.490318] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[ 71.663393] parport_pc 00:0d: reported by Plug and Play BIOS
[ 71.755504] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 74.776814] Adding 530136k swap on /dev/sdb3. Priority:1 extents:1 across:530136k
[ 74.844861] Adding 265032k swap on /dev/sde1. Priority:1 extents:1 across:265032k
[ 74.896805] Adding 265032k swap on /dev/sdd1. Priority:1 extents:1 across:265032k
[ 74.950651] Adding 530136k swap on /dev/sda3. Priority:1 extents:1 across:530136k
[ 75.013863] Adding 265032k swap on /dev/sdc1. Priority:1 extents:1 across:265032k
[ 75.040488] Adding 265032k swap on /dev/sdf1. Priority:1 extents:1 across:265032k
[ 75.771429] EXT3 FS on md1, internal journal
[ 76.964334] usbcore: registered new interface driver usbfs
[ 76.968334] usbcore: registered new interface driver hub
[ 76.985576] usbcore: registered new device driver usb
[ 77.026298] usbcore: registered new interface driver usbkbd
[ 77.030298] usbkbd: :USB HID Boot Protocol keyboard driver
[ 77.155018] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 77.202298] USB Universal Host Controller Interface driver v3.0
[ 77.372384] usbcore: registered new interface driver hiddev
[ 77.376384] usbcore: registered new interface driver usbhid
[ 77.380384] usbhid: v2.6:USB HID core driver
[ 83.498198] kjournald starting. Commit interval 5 seconds
[ 83.524063] EXT3 FS on md0, internal journal
[ 83.524122] EXT3-fs: mounted filesystem with ordered data mode.
[ 86.176117] eth0: setting full-duplex.
[ 93.178165] NET: Registered protocol family 10
[ 93.260954] lo: Disabled Privacy Extensions
[ 101.220799] RPC: Registered udp transport module.
[ 101.224799] RPC: Registered tcp transport module.
[ 101.505070] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 101.790979] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 101.816326] NFSD: starting 90-second grace period
[ 102.985653] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 103.984042] eth0: no IPv6 routers present
Reply to: