Bug#509923: dmesg output
Further to the last post. These are the errors I see from pata_marvell
on boot with drives attached to the controller if I leave everything as
default.
pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_marvell 0000:03:00.0: setting latency timer to 64
scsi2 : pata_marvell
scsi3 : pata_marvell
ata3: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 16
ata4: PATA max UDMA/133 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 16
BAR5:00:04 01:7F 02:22 03:C8 04:02 05:00 06:00 07:80 08:00 09:00 0A:00
0B:00 0C:1F 0D:00 0E:00 0F:00
ata4.01: qc timeout (cmd 0xec)
ata4.01: failed to IDENTIFY (I/O error, err_mask=0x4)
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: SRST failed (errno=-16)
ata4: reset failed, giving up
ata4: link is slow to respond, please be patient (ready=0)
ata4: device not ready (errno=-16), forcing hardreset
ata4: soft resetting link
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: link is slow to respond, please be patient (ready=0)
ata4: SRST failed (errno=-16)
ata4: soft resetting link
ata4: SRST failed (errno=-16)
ata4: reset failed, giving up
ata4: EH complete
If I blacklist pata_marvell and set ahci.enable_marvell=1 I get similar
problems.
ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata4.00: failed command: IDENTIFY DEVICE
ata3.00: failed command: IDENTIFY DEVICE
ata3.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:00:1f:00:00/00:00:00:00:00/e0 Emask 0x4 (timeout)
ata3.00: status: { DRDY }
ata4.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: hard resetting link
ata4.00: status: { DRDY }
ata4: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: configured for UDMA/133
ata4: EH complete
eth0: no IPv6 routers present
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: hard resetting link
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: qc timeout (cmd 0xec)
ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata3.00: revalidation failed (errno=-5)
ata3: limiting SATA link speed to 1.5 Gbps
ata3: hard resetting link
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Cheers,
D.
Reply to: