Bug#529436: linux-image-2.6.26-2-vserver-686-bigmem: Only 3.2Gb of memory accessible out of 16gb in system
Package: linux-image-2.6.26-2-vserver-686-bigmem
Version: 2.6.26-15lenny2
Severity: important
System is a Dell R610 with 16GB of RAM but only the first 3.2GB is
currently being detected. This is using a bigmem kernel so should expect to
see all 16GB.
Not quite sure where to start looking into this but a colleague suspects
that it may be related to some E820 patches made by Paul Jackson in May
2008. Commit refs in linux-2.6 git tree are:
c3965bd15118742d72b4bc1a290d37b3f081eb98
028b785888c523baccdf27af0cdbf1deb92edec0
6e9bcc796b120d17b08dde7ab958b82ddb899889
5b7eb2e9ef4e467a1248537b47a63bab265be3cc
69c9189320c46b14e5ae3ad4b3a0d35cc63cba20
with a later bug fix in commit:
1b72691ce35812ff865d778f303779e774d2b098
I haven't had a chance to try building this patch into the kernel yet to
see if this resolves the issue.
I've also tried using a standard bigmem kernel (no vserver) and the same
problem is reported.
-- Package-specific info:
** Version:
Linux version 2.6.26-2-vserver-686-bigmem (Debian 2.6.26-15lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Mon May 11 21:25:01 UTC 2009
** Command line:
root=/dev/mapper/vg0-root ro
** Not tainted
** Kernel log:
[ 57.137973] raid6: sse2x1 6599 MB/s
[ 57.206017] raid6: sse2x2 7757 MB/s
[ 57.206017] raid6: using algorithm sse2x2 (7757 MB/s)
[ 57.206017] md: raid6 personality registered for level 6
[ 57.206017] md: raid5 personality registered for level 5
[ 57.206017] md: raid4 personality registered for level 4
[ 57.213883] md: md0 stopped.
[ 57.744540] md: md1 stopped.
[ 57.767236] md: bind<sdb2>
[ 57.767475] md: bind<sdc2>
[ 57.767719] md: bind<sdd2>
[ 57.767958] md: bind<sda2>
[ 57.785268] raid5: device sda2 operational as raid disk 0
[ 57.785268] raid5: device sdc2 operational as raid disk 2
[ 57.785268] raid5: device sdb2 operational as raid disk 1
[ 57.785349] raid5: allocated 3170kB for md1
[ 57.785349] raid5: raid level 5 set md1 active with 3 out of 3 devices, algorithm 2
[ 57.785349] RAID5 conf printout:
[ 57.785349] --- rd:3 wd:3
[ 57.785349] disk 0, o:1, dev:sda2
[ 57.785349] disk 1, o:1, dev:sdb2
[ 57.785349] disk 2, o:1, dev:sdc2
[ 57.820865] md: bind<sda1>
[ 57.821018] md: bind<sdc1>
[ 57.821188] md: bind<sdb1>
[ 57.821345] md: bind<sdd1>
[ 57.842833] raid1: raid set md0 active with 4 out of 4 mirrors
[ 57.913540] device-mapper: uevent: version 1.0.3
[ 57.913600] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 58.191150] PM: Starting manual resume from disk
[ 58.218329] kjournald starting. Commit interval 5 seconds
[ 58.218329] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.156079] udevd version 125 started
[ 59.618058] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 59.850599] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 59.850599] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 59.850599] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 59.901280] input: Power Button (FF) as /class/input/input3
[ 59.925056] ACPI: Power Button (FF) [PWRF]
[ 59.937917] input: PC Speaker as /class/input/input4
[ 60.751806] EXT3 FS on dm-0, internal journal
[ 61.206319] loop: module loaded
[ 68.757434] kjournald starting. Commit interval 5 seconds
[ 68.775713] EXT3 FS on md0, internal journal
[ 68.775713] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.778328] kjournald starting. Commit interval 5 seconds
[ 68.782095] EXT3 FS on dm-1, internal journal
[ 68.782095] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.790485] kjournald starting. Commit interval 5 seconds
[ 68.820577] EXT3 FS on dm-2, internal journal
[ 68.820577] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.828855] kjournald starting. Commit interval 5 seconds
[ 68.873861] EXT3 FS on dm-4, internal journal
[ 68.873861] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.879519] kjournald starting. Commit interval 5 seconds
[ 68.897229] EXT3 FS on dm-5, internal journal
[ 68.897229] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.905187] kjournald starting. Commit interval 5 seconds
[ 68.922797] EXT3 FS on dm-6, internal journal
[ 68.922797] EXT3-fs: mounted filesystem with ordered data mode.
[ 68.958636] Adding 7811064k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:7811064k
[ 69.644690] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 70.294030] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 70.734394] bnx2: eth0: using MSIX
[ 70.734669] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.226705] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 71.226705] All bugs added by David S. Miller <davem@redhat.com>
[ 71.307617] ADDRCONF(NETDEV_UP): eth0.1234: link is not ready
[ 74.893376] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex
[ 74.893376] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 74.893376] ADDRCONF(NETDEV_CHANGE): eth0.1234: link becomes ready
[ 80.207299] ipmi message handler version 39.2
[ 80.284014] IPMI System Interface driver.
[ 80.284014] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca8, slave address 0x20, irq 0
[ 80.413534] ipmi: Found new BMC (man_id: 0x0002a2, prod_id: 0x0100, dev_id: 0x20)
[ 80.413534] IPMI kcs interface initialized
[ 80.431921] ipmi device interface
[ 81.381714] Not cloning cgroup for unused subsystem ns
[ 81.383239] Not cloning cgroup for unused subsystem ns
[ 81.448114] CE: hpet increasing min_delta_ns to 15000 nsec
[ 81.840777] Not cloning cgroup for unused subsystem ns
[ 81.840777] Not cloning cgroup for unused subsystem ns
[ 83.510514] dummy0: no IPv6 routers present
[ 89.036189] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 89.560164] eth0: no IPv6 routers present
[ 90.728597] eth0.1234: no IPv6 routers present
[ 119.381735] CE: hpet increasing min_delta_ns to 22500 nsec
[ 1124.956006] CE: hpet increasing min_delta_ns to 33750 nsec
[ 6245.980812] CE: hpet increasing min_delta_ns to 50624 nsec
[ 7562.153029] usb 5-3.2: USB disconnect, address 3
[42379.491560] bnx2: eth0 NIC Copper Link is Down
[43684.428257] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[43722.324028] bnx2: eth0 NIC Copper Link is Down
[43727.811074] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[43729.413891] bnx2: eth0 NIC Copper Link is Down
[43732.460827] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[46224.701583] bnx2: eth0 NIC Copper Link is Down
[46227.302890] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
[72890.868115] bnx2: eth0 NIC Copper Link is Down
[72901.047313] bnx2: eth0 NIC Copper Link is Up, 1000 Mbps full duplex, receive & transmit flow control ON
** Loaded modules:
Module Size Used by
ipmi_devintf 6984 0
ipmi_si 34124 0
ipmi_msghandler 30360 2 ipmi_devintf,ipmi_si
dummy 3232 0
8021q 16832 0
ipt_MASQUERADE 3360 2
iptable_nat 5448 1
nf_nat 16312 2 ipt_MASQUERADE,iptable_nat
xt_tcpudp 3584 7
nf_conntrack_ipv4 13036 4 iptable_nat,nf_nat
xt_state 2784 1
nf_conntrack 56308 5 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state
iptable_filter 3392 1
ip_tables 10928 2 iptable_nat,iptable_filter
x_tables 14052 5 ipt_MASQUERADE,iptable_nat,xt_tcpudp,xt_state,ip_tables
loop 13676 0
serio_raw 5508 0
pcspkr 3200 0
psmouse 33104 0
button 6864 0
iTCO_wdt 10276 0
evdev 8768 0
dcdbas 7076 0
ext3 109032 7
jbd 40212 1 ext3
mbcache 7876 1 ext3
dm_mirror 15872 0
dm_log 9252 1 dm_mirror
dm_snapshot 15108 0
dm_mod 47368 19 dm_mirror,dm_log,dm_snapshot
raid456 117776 1
async_xor 3200 1 raid456
async_memcpy 2560 1 raid456
async_tx 3168 1 raid456
xor 15464 2 raid456,async_xor
raid1 18784 1
md_mod 67804 4 raid456,raid1
sg 27732 0
sr_mod 14084 0
cdrom 30976 1 sr_mod
sd_mod 22968 12
ide_pci_generic 4676 0 [permanent]
ide_core 96968 1 ide_pci_generic
usbhid 36704 0
hid 33952 1 usbhid
ff_memless 5160 1 usbhid
ata_generic 5444 0
mptsas 23976 8
mptscsih 22624 1 mptsas
ata_piix 15012 0
mptbase 52580 2 mptsas,mptscsih
libata 141280 2 ata_generic,ata_piix
scsi_transport_sas 26240 1 mptsas
dock 9072 1 libata
scsi_mod 130092 7 sg,sr_mod,sd_mod,mptsas,mptscsih,libata,scsi_transport_sas
ehci_hcd 29388 0
uhci_hcd 19504 0
usbcore 119248 4 usbhid,ehci_hcd,uhci_hcd
bnx2 54536 0
firmware_class 7584 1 bnx2
thermal 15996 0
processor 33504 17 thermal
fan 4932 0
thermal_sys 11624 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation QuickPath Architecture I/O Hub to ESI Port [8086:3403] (rev 13)
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 15
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 1 [8086:3408] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d6000000-d9ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 3 [8086:340a] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: da000000-ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 7 [8086:340e] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:09.0 PCI bridge [0604]: Intel Corporation QuickPath Architecture I/O Hub PCI Express Root Port 9 [8086:3410] (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:14.0 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub System Management Registers [8086:342e] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub GPIO and Scratch Pad Registers [8086:3422] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.2 PIC [0800]: Intel Corporation QuickPath Architecture I/O Hub Control Status and RAS Registers [8086:3423] (rev 13) (prog-if 00 [8259])
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at ec40 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at ec60 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at df0ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: df100000-df2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ec80 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at eca0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at df0ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d5800000-00000000d5ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02)
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 0: I/O ports at ec10 [size=8]
Region 1: I/O ports at ec08 [size=4]
Region 2: I/O ports at ec18 [size=8]
Region 3: I/O ports at ec0c [size=4]
Region 4: I/O ports at ec20 [size=16]
Region 5: I/O ports at ec30 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 36
Region 0: Memory at d6000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
01:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 48
Region 0: Memory at d8000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.1 Ethernet controller [0200]: Broadcom Corporation NetXtreme II BCM5709 Gigabit Ethernet [14e4:1639] (rev 20)
Subsystem: Dell Device [1028:0236]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 42
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS [1000:0058] (rev 08)
Subsystem: Dell SAS 6/iR Integrated RAID Controller [1028:1f10]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at df100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptsas
Kernel modules: mptsas
06:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:0236]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at d5800000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: <access denied>
** Sound cards:
-- System Information:
Debian Release: 5.0.1
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-vserver-686-bigmem (SMP w/16 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-vserver-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-vserver-686-bigmem recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-vserver-686-bigmem suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-test-error-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/preinst/elilo-initrd-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-overwrite-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-2.6.26-2-vserver-686-bigmem: false
linux-image-2.6.26-2-vserver-686-bigmem/preinst/abort-install-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-vserver-686-bigmem/preinst/initrd-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/bootloader-error-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-system-map-link-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/failed-to-move-modules-2.6.26-2-vserver-686-bigmem:
linux-image-2.6.26-2-vserver-686-bigmem/postinst/depmod-error-initrd-2.6.26-2-vserver-686-bigmem: false
linux-image-2.6.26-2-vserver-686-bigmem/postinst/create-kimage-link-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-initrd-link-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/prerm/removing-running-kernel-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/bootloader-initrd-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/postinst/old-dir-initrd-link-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/overwriting-modules-2.6.26-2-vserver-686-bigmem: true
linux-image-2.6.26-2-vserver-686-bigmem/preinst/lilo-initrd-2.6.26-2-vserver-686-bigmem: true
Reply to: