Bug#529471: kvm fails to boot Win XP after update to linux-image-2.6.29-2-686
Subject: kvm fails to boot Win XP after update to linux-image-2.6.29-2-686
Package: linux-image-2.6.29-2-686
Version: 2.6.29-5
Severity: important
*** Please type your report below this line ***
Hi,
I run kvm with debian guests and XP guests. After the update from
kernel linux-image-2.6.28-1-686 to linux-image-2.6.29-2-686 Win XP
seems not to boot any longer. In the VNC-display I only have a black
screen and an underline-character. But the debian-guests start as usual.
When I boot with the older linux-image-2.6.28-1-686 again, XP starts
in the vncviewer-window. I start my kvm-guests with Virtual Machine
Manager 0.6.0 powered by libvirt.
Thanks.
-- Package-specific info:
** Version:
Linux version 2.6.29-2-686 (Debian 2.6.29-5) (waldi@debian.org) (gcc
version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun May 17 17:56:29 UTC 2009
** Command line:
root=/dev/mapper/volgrp1-logvol1 ro quiet
** Not tainted
** Kernel log:
[ 8.384937] usb usb5: configuration #1 chosen from 1 choice
[ 8.384953] hub 5-0:1.0: USB hub found
[ 8.384956] hub 5-0:1.0: 2 ports detected
[ 8.385015] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low)
-> IRQ 20
[ 8.385019] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 8.385021] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 8.385035] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 8.385052] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00003180
[ 8.385072] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.385074] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.385075] usb usb6: Product: UHCI Host Controller
[ 8.385076] usb usb6: Manufacturer: Linux 2.6.29-2-686 uhci_hcd
[ 8.385078] usb usb6: SerialNumber: 0000:00:1d.0
[ 8.385106] usb usb6: configuration #1 chosen from 1 choice
[ 8.385122] hub 6-0:1.0: USB hub found
[ 8.385125] hub 6-0:1.0: 2 ports detected
[ 8.385183] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 8.385187] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 8.385189] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 8.385201] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 8.385219] uhci_hcd 0000:00:1d.1: irq 21, io base 0x000031a0
[ 8.385238] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.385239] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.385241] usb usb7: Product: UHCI Host Controller
[ 8.385242] usb usb7: Manufacturer: Linux 2.6.29-2-686 uhci_hcd
[ 8.385243] usb usb7: SerialNumber: 0000:00:1d.1
[ 8.385270] usb usb7: configuration #1 chosen from 1 choice
[ 8.385285] hub 7-0:1.0: USB hub found
[ 8.385288] hub 7-0:1.0: 2 ports detected
[ 8.385343] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low)
-> IRQ 22
[ 8.385347] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 8.385349] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 8.385363] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 8.385380] uhci_hcd 0000:00:1d.2: irq 22, io base 0x000031c0
[ 8.385398] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 8.385399] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 8.385401] usb usb8: Product: UHCI Host Controller
[ 8.385402] usb usb8: Manufacturer: Linux 2.6.29-2-686 uhci_hcd
[ 8.385403] usb usb8: SerialNumber: 0000:00:1d.2
[ 8.385429] usb usb8: configuration #1 chosen from 1 choice
[ 8.385445] hub 8-0:1.0: USB hub found
[ 8.385448] hub 8-0:1.0: 2 ports detected
[ 8.392171] sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 8.456193] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.705707] device-mapper: uevent: version 1.0.3
[ 8.706018] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel@redhat.com
[ 8.777353] PM: Starting manual resume from disk
[ 8.826905] kjournald starting. Commit interval 5 seconds
[ 8.826914] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.989527] udevd version 125 started
[ 10.274651] Linux agpgart interface v0.103
[ 10.289577] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 10.304512] ACPI: Power Button (FF) [PWRF]
[ 10.304564] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 10.316510] ACPI: Power Button (CM) [PBTN]
[ 10.453538] ACPI: WMI: Mapper loaded
[ 10.509675] tpm_inf_pnp 00:0a: Found TPM with ID IFX0102
[ 10.509710] tpm_inf_pnp 00:0a: TPM found: config base 0x4e, data
base 0xcb0, chip version 0x000b, vendor id 0x15d1 (Infineon), product
id 0x000b (SLB 9635 TT 1.2)
[ 10.766109] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 10.766219] iTCO_wdt: failed to reset NO_REBOOT flag, reboot
disabled by hardware
[ 10.766259] iTCO_wdt: No card detected
[ 10.998781] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 11.243342] input: GenPS/2 Genius Mouse as
/devices/platform/i8042/serio1/input/input4
[ 11.369717] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level,
low) -> IRQ 21
[ 11.369759] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.041887] Adding 1951888k swap on /dev/sda2. Priority:-1
extents:1 across:1951888k
[ 13.278382] EXT3 FS on dm-0, internal journal
[ 14.018380] loop: module loaded
[ 16.252317] kjournald starting. Commit interval 5 seconds
[ 16.252502] EXT3 FS on sda1, internal journal
[ 16.252506] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.274196] kjournald starting. Commit interval 5 seconds
[ 16.274381] EXT3 FS on dm-4, internal journal
[ 16.274384] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.297335] kjournald starting. Commit interval 5 seconds
[ 16.297522] EXT3 FS on dm-3, internal journal
[ 16.297526] EXT3-fs: mounted filesystem with ordered data mode.
[ 16.319593] kjournald starting. Commit interval 5 seconds
[ 16.319811] EXT3 FS on dm-1, internal journal
[ 16.319814] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.041239] NET: Registered protocol family 15
[ 17.100853] alg: No test for cipher_null (cipher_null-generic)
[ 17.100898] alg: No test for digest_null (digest_null-generic)
[ 17.100963] alg: No test for compress_null (compress_null-generic)
[ 17.973869] eth0: setting full-duplex.
[ 18.175218] NET: Registered protocol family 10
[ 18.175555] lo: Disabled Privacy Extensions
[ 18.616554] Bridge firewalling registered
[ 18.618317] device eth1 entered promiscuous mode
[ 18.636714] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 18.692047] e1000e 0000:00:19.0: irq 31 for MSI/MSI-X
[ 18.692291] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.796760] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow
Control: None
[ 21.796901] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 21.796949] br0: port 1(eth1) entering learning state
[ 28.692012] br0: no IPv6 routers present
[ 28.724011] eth0: no IPv6 routers present
[ 32.216512] eth1: no IPv6 routers present
[ 36.796010] br0: topology change detected, propagating
[ 36.796013] br0: port 1(eth1) entering forwarding state
** Loaded modules:
Module Size Used by
kvm_intel 38792 0
kvm 131344 1 kvm_intel
bridge 39864 0
stp 2092 1 bridge
ipv6 232468 34
deflate 2332 0
zlib_deflate 17572 1 deflate
zlib_inflate 13468 1 deflate
ctr 3672 0
twofish 6244 0
twofish_common 13300 1 twofish
camellia 17504 0
serpent 16804 0
blowfish 7864 0
des_generic 16128 0
cbc 2996 0
aes_i586 7456 0
aes_generic 27412 1 aes_i586
xcbc 4064 0
rmd160 10032 0
sha256_generic 11200 0
sha1_generic 1968 0
hmac 3500 0
crypto_null 2804 0
af_key 25368 0
loop 12988 0
snd_hda_codec_analog 53664 1
snd_hda_intel 22092 0
snd_hda_codec 58808 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6000 1 snd_hda_codec
snd_pcm_oss 31708 0
snd_mixer_oss 12000 1 snd_pcm_oss
snd_pcm 62708 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 2368 0
snd_seq_oss 24756 0
snd_seq_midi 5448 0
snd_rawmidi 18544 1 snd_seq_midi
snd_seq_midi_event 6072 2 snd_seq_oss,snd_seq_midi
snd_seq 42120 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
psmouse 36628 0
snd_timer 17808 2 snd_pcm,snd_seq
snd_seq_device 6108 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
pcspkr 2092 0
serio_raw 4544 0
evdev 8160 3
snd 48420 12
snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 6204 1 snd
iTCO_wdt 9880 0
snd_page_alloc 8036 2 snd_hda_intel,snd_pcm
tpm_infineon 7280 0
tpm 13352 1 tpm_infineon
tpm_bios 4980 1 tpm
wmi 6332 0
intel_agp 22548 0
button 5672 0
agpgart 30624 1 intel_agp
ext3 107180 5
jbd 42500 1 ext3
mbcache 7180 1 ext3
dm_mirror 12468 0
dm_region_hash 10632 1 dm_mirror
dm_log 8588 2 dm_mirror,dm_region_hash
dm_snapshot 17444 0
dm_mod 48856 17 dm_mirror,dm_log,dm_snapshot
sd_mod 28252 8
crc_t10dif 1616 1 sd_mod
floppy 46852 0
ide_pci_generic 3408 0
ide_core 91812 1 ide_pci_generic
ahci 27568 7
3c59x 35576 0
mii 4648 1 3c59x
ehci_hcd 29936 0
uhci_hcd 19392 0
ata_generic 4316 0
usbcore 124912 3 ehci_hcd,uhci_hcd
e1000e 98068 0
libata 148892 2 ahci,ata_generic
scsi_mod 132076 2 sd_mod,libata
thermal 15092 0
processor 39540 3 thermal
fan 4104 0
thermal_sys 10272 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM
Controller [8086:2e10] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI
Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Hewlett-Packard Company Device [103c:3035]
Capabilities: [80] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] MSI: Mask- 64bit- Count=1/1 Enable+
Address: fee0300c Data: 4179
Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #2, Speed 5GT/s, Width x16, ASPM L0s, Latency L0
<256ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt+ ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 75.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [100] Virtual Channel <?>
Capabilities: [140] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:03.0 Communication controller [0780]: Intel Corporation 4 Series
Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f302a000 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT
IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 0: I/O ports at 3230 [size=8]
Region 1: I/O ports at 3258 [size=4]
Region 2: I/O ports at 3238 [size=8]
Region 3: I/O ports at 325c [size=4]
Region 4: I/O ports at 3220 [size=16]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset
Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 3240 [size=8]
Region 1: Memory at f3024000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [c8] Power Management version 3
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3
Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f3025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 3100 [size=32]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Mask- 64bit+ Count=1/1 Enable+
Address: 00000000fee0300c Data: 41d1
Capabilities: [e0] PCIe advanced features <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 3120 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 3140 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 3160 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 0: Memory at f3027000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10
Family) HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f3020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0
<64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family)
PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 2, PowerLimit 10.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Mask- 64bit- Count=1/1 Enable+
Address: fee0300c Data: 4181
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:3035]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family)
PCI Express Port 5 [8086:3a78] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<1us, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl+
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-,
Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance-
ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [80] MSI: Mask- 64bit- Count=1/1 Enable+
Address: fee0300c Data: 4189
Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:3035]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 3180 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 31a0 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 31c0 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10
Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f3028000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: f3100000-f31fffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:3035]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC
Interface Controller [8086:3a14] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10
Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI
1.0])
Subsystem: Hewlett-Packard Company Device [103c:3035]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 32
Region 0: I/O ports at 3248 [size=8]
Region 1: I/O ports at 3260 [size=4]
Region 2: I/O ports at 3250 [size=8]
Region 3: I/O ports at 3264 [size=4]
Region 4: I/O ports at 31e0 [size=32]
Region 5: Memory at f3026000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Mask- 64bit- Count=1/8 Enable+
Address: fee0300c Data: 41b9
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
Kernel modules: ahci
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
8600 GT [10de:0402] (rev a1) (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:2026]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f0000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 2100 [size=128]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Mask- 64bit+ Count=1/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0
<512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel modules: nvidiafb
07:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M
[Tornado] [10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC
Management NIC [10b7:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 1100 [size=128]
Region 1: Memory at f3100000 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: 3c59x
Kernel modules: 3c59x
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.29-2-686 (SMP w/2 CPU cores)
Locale: LANG=en_IE@euro, LC_CTYPE=en_IE@euro (charmap=ISO-8859-15)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.29-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration
management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux
kernel mo
Versions of packages linux-image-2.6.29-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared
libraries [i
Versions of packages linux-image-2.6.29-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader
(Legacy v
pn linux-doc-2.6.29 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.29-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.29-2-686/postinst/depmod-error-2.6.29-2-686: false
linux-image-2.6.29-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.29-2-686/preinst/overwriting-modules-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-error-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/abort-install-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/create-kimage-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/failed-to-move-modules-2.6.29-2-686:
linux-image-2.6.29-2-686/preinst/initrd-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-dir-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/old-initrd-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/removing-running-kernel-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/bootloader-test-error-2.6.29-2-686:
linux-image-2.6.29-2-686/postinst/old-system-map-link-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/bootloader-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/postinst/depmod-error-initrd-2.6.29-2-686: false
linux-image-2.6.29-2-686/preinst/elilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/prerm/would-invalidate-boot-loader-2.6.29-2-686:
true
linux-image-2.6.29-2-686/preinst/lilo-initrd-2.6.29-2-686: true
linux-image-2.6.29-2-686/preinst/abort-overwrite-2.6.29-2-686:
Reply to: