Hi,
Either way, please file this upstream: http://bugzilla.kernel.org/
Ok so I've created an account there but I don't know how to report a bug, and in what category that goes. Memory Management, IO/Storage, Drivers and then which sub category. I've downloaded 2.6.32-rc1 compiled it with Rocket Raid 3210 support (hptiop) and High Memory Support for 64GB. The same error while booting (Kernel panic) "I/O error"
Sometimes I also get an "Exec format error" but not always. I always get that error: === kernel messages === sd 0:0:0:0: [sda] Unhandled error code sd 0:0:0:0: [sda] Result: hostbyte=DID_ABORT driverbyte=DRIVER_OK end_request: I/O error, dev sda, sector 82264479 [...]EXT3-fs error (device sda1): ext3_get_inode_loc: unable to read inode block - inode=2564163, block=10256390
[...] === kernel messages === Attached also the config file of that kernel. Here is the output of lspci. === lspci ===00:00.0 Host bridge: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part 00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) 00:03.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port B) 00:0a.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port F)
00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 SE/7200 GS] (rev a1) 02:00.0 RAID bus controller: HighPoint Technologies, Inc. Device 3120 (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
=== lspci === Thanks a lot and a nice weekendPatrick
Attachment:
config-2.6.32-rc2
Description: Binary data