Your message dated Mon, 31 Aug 2009 21:01:56 +0100 with message-id <1251748916.4429.205.camel@localhost> and subject line Re: linux-image-2.6.30-1-amd64: Low disk perfromance, system unresponsible on some high io has caused the Debian Bug report #540012, regarding linux-image-2.6.30-1-amd64: Low disk perfromance, system unresponsible on some high io to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 540012: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=540012 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.30-1-amd64: Low disk perfromance, system unresponsible on some high io
- From: Paul Romanchenko <paulaner@gmail.com>
- Date: Wed, 5 Aug 2009 10:32:29 +0400
- Message-id: <[🔎] b1e5fd530908042332p30699b47qb90b32a66d144b59@mail.gmail.com>
Package: linux-image-2.6.30-1-amd64 Version: 2.6.30-1 Severity: important Simple test: $ dd if=/dev/zero of=./test.img bs=572041216 count=1 1+0 records in 1+0 records out 572041216 bytes (572 MB) copied, 24.3899 seconds, 23.5 MB/s It takes 24 seconds to write 572MB. During the dd, the system is almost unresponsible, even Ctrl-C can't breake the operation. During regular work, any io load (swapping/paging) freeze the system. Disk is not so bad: $ sudo hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 268 MB in 3.02 seconds = 88.84 MB/sec Here is scheduler used (i tried all, 1-2 MB/s changes): $ cat /sys/block/sda/queue/scheduler noop [anticipatory] deadline cfq Some fs info $ mount | grep sda /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro) If it does matter, more fs info: $ sudo tune2fs -l /dev/sda1 tune2fs 1.41.6 (30-May-2009) Filesystem volume name: <none> Last mounted on: <not available> Filesystem UUID: 5cf50667-d82b-49f4-9264-d4d5abf50299 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal resize_inode dir_index filetype needs_recovery sparse_super large_file Filesystem flags: signed_directory_hash Default mount options: (none) Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 29294592 Block count: 58564949 Reserved block count: 2928247 Free blocks: 3520182 Free inodes: 28231905 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 1010 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 16384 Inode blocks per group: 512 Filesystem created: Wed Jan 16 12:44:26 2008 Last mount time: Wed Jul 29 11:10:27 2009 Last write time: Wed Jul 29 11:10:27 2009 Mount count: 9 Maximum mount count: 24 Last checked: Fri May 29 18:52:54 2009 Check interval: 15552000 (6 months) Next check after: Wed Nov 25 17:52:54 2009 Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 128 Journal inode: 8 First orphan inode: 19825830 Default directory hash: tea Directory Hash Seed: c15f0d73-e153-4e2f-a393-831da7105ea9 Journal backup: inode blocks Hardware info: -- Package-specific info: ** Version: Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009 ** Command line: root=/dev/sda1 ro single ** Tainted: P (1) ** Kernel log (I've replaced with more interesting `dmesg`): [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009 [ 0.000000] Command line: root=/dev/sda1 ro single [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x100000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 2 base 000000000 mask F00000000 write-back [ 0.000000] 3 base 100000000 mask FE0000000 write-back [ 0.000000] 4 base 120000000 mask FF0000000 write-back [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x100000000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] 0000000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 10000-16000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000 [ 0.000000] RAMDISK: 379cb000 - 37fef43d [ 0.000000] ACPI: RSDP 00000000000fbcd0 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 A_M_I_ OEMXSDT 12000712 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP 12000712 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff805c0 090A1 (v01 A0751 A0751064 00000064 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 12000712 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 12000712 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 12000712 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff89670 00038 (v01 A_M_I_ OEMHPET 12000712 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000cff896b0 000B0 (v01 A_M_I_ OEMOSFR 12000712 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff] [ 0.000000] bootmap [000000000001d000 - 0000000000042fff] pages 26 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==> [0000200000 - 00007d98cc] [ 0.000000] #3 [00379cb000 - 0037fef43d] RAMDISK ==> [00379cb000 - 0037fef43d] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00007da000 - 00007da270] BRK ==> [00007da000 - 00007da270] [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000] [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048335 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1601 pages reserved [ 0.000000] DMA zone: 2326 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000 [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000 [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ee00000) [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages at ffff880028022000, static data 76256 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029710 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda1 ro single [ 0.000000] Initializing CPU#0 [ 0.000000] Experimental hierarchical RCU implementation. [ 0.000000] Experimental hierarchical RCU init done. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2405.719 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.004000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.004000] Memory: 4055032k/4980736k available (2782k kernel code, 787396k absent, 138308k reserved, 1398k data, 560k init) [ 0.004000] hpet clockevent registered [ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4811.43 BogoMIPS (lpj=9622876) [ 0.004000] Security Framework initialized [ 0.004000] SELinux: Disabled at boot. [ 0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Mount-cache hash table entries: 256 [ 0.004000] Initializing cgroup subsys ns [ 0.004012] Initializing cgroup subsys cpuacct [ 0.004054] Initializing cgroup subsys devices [ 0.004095] Initializing cgroup subsys freezer [ 0.004135] Initializing cgroup subsys net_cls [ 0.004200] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004268] CPU: L2 cache: 4096K [ 0.004308] CPU 0/0x0 -> Node 0 [ 0.004347] CPU: Physical Processor ID: 0 [ 0.004386] CPU: Processor Core ID: 0 [ 0.004431] CPU0: Thermal monitoring enabled (TM2) [ 0.004473] using mwait in idle threads. [ 0.005342] ACPI: Core revision 20090320 [ 0.020050] Setting APIC routing to flat [ 0.020390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.062241] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4810.88 BogoMIPS (lpj=9621773) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/0x1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.149369] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.149840] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.152143] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.004000] Initializing CPU#2 [ 0.004000] Calibrating delay using timer specific routine.. 4810.90 BogoMIPS (lpj=9621802) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 2/0x2 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 2 [ 0.004000] CPU2: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 [ 0.245330] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.245799] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.248095] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.004000] Initializing CPU#3 [ 0.004000] Calibrating delay using timer specific routine.. 4810.90 BogoMIPS (lpj=9621811) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 3/0x3 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 3 [ 0.004000] CPU3: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 [ 0.341338] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 0.344017] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.348012] Brought up 4 CPUs [ 0.348054] Total of 4 processors activated (19244.13 BogoMIPS). [ 0.348153] CPU0 attaching sched-domain: [ 0.348155] domain 0: span 0-1 level MC [ 0.348157] groups: 0 1 [ 0.348161] domain 1: span 0-3 level CPU [ 0.348163] groups: 0-1 2-3 [ 0.348167] CPU1 attaching sched-domain: [ 0.348169] domain 0: span 0-1 level MC [ 0.348170] groups: 1 0 [ 0.348173] domain 1: span 0-3 level CPU [ 0.348175] groups: 0-1 2-3 [ 0.348179] CPU2 attaching sched-domain: [ 0.348180] domain 0: span 2-3 level MC [ 0.348182] groups: 2 3 [ 0.348185] domain 1: span 0-3 level CPU [ 0.348187] groups: 2-3 0-1 [ 0.348190] CPU3 attaching sched-domain: [ 0.348192] domain 0: span 2-3 level MC [ 0.348194] groups: 3 2 [ 0.348197] domain 1: span 0-3 level CPU [ 0.348198] groups: 2-3 0-1 [ 0.348296] net_namespace: 1936 bytes [ 0.348296] Booting paravirtualized kernel on bare hardware [ 0.348296] regulator: core version 0.5 [ 0.348296] NET: Registered protocol family 16 [ 0.348296] ACPI: bus type pci registered [ 0.348296] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.348296] PCI: Not using MMCONFIG. [ 0.348296] PCI: Using configuration type 1 for base access [ 0.352095] bio: create slab <bio-0> at 0 [ 0.352602] ACPI: EC: Look up EC in DSDT [ 0.366530] ACPI: Interpreter enabled [ 0.366576] ACPI: (supports S0 S1 S3 S4 S5) [ 0.366773] ACPI: Using IOAPIC for interrupt routing [ 0.366870] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.369383] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.379051] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.388142] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 73, should be 72 [20090320] [ 0.388365] ACPI: No dock devices found. [ 0.388467] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.388540] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.388540] pci 0000:00:01.0: PME# disabled [ 0.388540] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f] [ 0.388540] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f] [ 0.388540] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f] [ 0.388540] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff] [ 0.388540] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.388540] pci 0000:00:1a.7: PME# disabled [ 0.388570] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff] [ 0.388605] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.388648] pci 0000:00:1b.0: PME# disabled [ 0.388735] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.388778] pci 0000:00:1c.0: PME# disabled [ 0.388880] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.388923] pci 0000:00:1c.4: PME# disabled [ 0.389012] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.389056] pci 0000:00:1c.5: PME# disabled [ 0.389140] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f] [ 0.389200] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f] [ 0.389259] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f] [ 0.389321] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff] [ 0.389379] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.389423] pci 0000:00:1d.7: PME# disabled [ 0.389565] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.389617] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.389661] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.389757] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007] [ 0.389762] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03] [ 0.389767] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887] [ 0.389771] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803] [ 0.389776] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f] [ 0.389781] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f] [ 0.389821] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff] [ 0.389832] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.389869] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007] [ 0.389874] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03] [ 0.389879] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887] [ 0.389884] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803] [ 0.389888] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f] [ 0.389893] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f] [ 0.389943] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] [ 0.389951] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.389958] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] [ 0.389963] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.389968] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff] [ 0.390020] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff] [ 0.390023] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff] [ 0.390027] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.390066] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff] [ 0.390147] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff] [ 0.390156] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeaeffff] [ 0.390185] pci 0000:03:00.0: PME# supported from D3hot [ 0.390229] pci 0000:03:00.0: PME# disabled [ 0.390316] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07] [ 0.390324] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883] [ 0.390332] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807] [ 0.390340] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483] [ 0.390348] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f] [ 0.390430] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff] [ 0.390433] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff] [ 0.390483] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff] [ 0.390512] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9a0000-0xfe9bffff] [ 0.390543] pci 0000:02:00.0: PME# supported from D3hot D3cold [ 0.390587] pci 0000:02:00.0: PME# disabled [ 0.390668] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.390706] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff] [ 0.390712] pci 0000:05:03.0: reg 14 io port: [0xec00-0xec7f] [ 0.390750] pci 0000:05:03.0: supports D2 [ 0.390752] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold [ 0.390796] pci 0000:05:03.0: PME# disabled [ 0.390872] pci 0000:00:1e.0: transparent bridge [ 0.390914] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.390917] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.392023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.392167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.392225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.392335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.392396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 0.392467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.408957] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.412157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.412646] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.413136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.413625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.414184] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.414683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.415172] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.415597] usbcore: registered new interface driver usbfs [ 0.415597] usbcore: registered new interface driver hub [ 0.416026] usbcore: registered new device driver usb [ 0.416058] PCI: Using ACPI for IRQ routing [ 0.432040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.432242] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.456067] pnp: PnP ACPI init [ 0.456116] ACPI: bus type pnp registered [ 0.459619] pnp: PnP ACPI: found 14 devices [ 0.459660] ACPI: ACPI bus type pnp unregistered [ 0.459707] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.459754] system 00:06: ioport range 0x290-0x297 has been reserved [ 0.459799] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.459841] system 00:07: ioport range 0x800-0x87f has been reserved [ 0.459884] system 00:07: ioport range 0x480-0x4bf has been reserved [ 0.459927] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.459971] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.460014] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved [ 0.460058] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved [ 0.460101] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.460145] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved [ 0.460193] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.460239] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.460283] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.460329] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.460374] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.460417] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.460460] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.460504] system 00:0d: iomem range 0x100000-0xcfffffff could not be reserved [ 0.465673] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.465716] pci 0000:00:01.0: IO window: 0xc000-0xcfff [ 0.465759] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff [ 0.465801] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.465854] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 0.465895] pci 0000:00:1c.0: IO window: disabled [ 0.465938] pci 0000:00:1c.0: MEM window: disabled [ 0.465980] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff [ 0.466034] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.466077] pci 0000:00:1c.4: IO window: 0xd000-0xdfff [ 0.466120] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff [ 0.466163] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.466208] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 0.466249] pci 0000:00:1c.5: IO window: disabled [ 0.466292] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff [ 0.466335] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.466379] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.466427] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.466470] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff [ 0.466513] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.466561] alloc irq_desc for 16 on cpu 0 node 0 [ 0.466563] alloc kstat_irqs on cpu 0 node 0 [ 0.466568] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.466612] pci 0000:00:01.0: setting latency timer to 64 [ 0.466618] alloc irq_desc for 17 on cpu 0 node 0 [ 0.466619] alloc kstat_irqs on cpu 0 node 0 [ 0.466623] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.466666] pci 0000:00:1c.0: setting latency timer to 64 [ 0.466672] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.466716] pci 0000:00:1c.4: setting latency timer to 64 [ 0.466722] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.466765] pci 0000:00:1c.5: setting latency timer to 64 [ 0.466770] pci 0000:00:1e.0: setting latency timer to 64 [ 0.466774] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.466776] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.466778] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff] [ 0.466780] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff] [ 0.466782] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.466784] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff] [ 0.466787] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.466788] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff] [ 0.466791] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff] [ 0.466793] pci_bus 0000:05: resource 0 io: [0xe000-0xefff] [ 0.466795] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.466797] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.466799] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.466904] NET: Registered protocol family 2 [ 0.502319] Switched to high resolution mode on CPU 1 [ 0.502637] Switched to high resolution mode on CPU 3 [ 0.503141] Switched to high resolution mode on CPU 2 [ 0.504400] Switched to high resolution mode on CPU 0 [ 0.512227] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.513436] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.516784] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.517316] TCP: Hash tables configured (established 524288 bind 65536) [ 0.517359] TCP reno registered [ 0.528166] NET: Registered protocol family 1 [ 0.528275] Trying to unpack rootfs image as initramfs... [ 0.678424] Freeing initrd memory: 6289k freed [ 0.682331] audit: initializing netlink socket (disabled) [ 0.682395] type=2000 audit(1248851418.680:1): initialized [ 0.682932] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.683250] VFS: Disk quotas dquot_6.5.2 [ 0.683334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.683443] msgmni has been set to 7932 [ 0.683756] alg: No test for stdrng (krng) [ 0.683870] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.683925] io scheduler noop registered [ 0.683981] io scheduler anticipatory registered [ 0.684022] io scheduler deadline registered [ 0.684098] io scheduler cfq registered (default) [ 0.684303] pci 0000:01:00.0: Boot video device [ 0.684478] alloc irq_desc for 24 on cpu 0 node 0 [ 0.684486] alloc kstat_irqs on cpu 0 node 0 [ 0.684499] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.684508] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.684715] alloc irq_desc for 25 on cpu 0 node 0 [ 0.684718] alloc kstat_irqs on cpu 0 node 0 [ 0.684726] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.684739] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.685004] alloc irq_desc for 26 on cpu 0 node 0 [ 0.685006] alloc kstat_irqs on cpu 0 node 0 [ 0.685012] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.685022] pcieport-driver 0000:00:1c.4: setting latency timer to 64 [ 0.685269] alloc irq_desc for 27 on cpu 0 node 0 [ 0.685272] alloc kstat_irqs on cpu 0 node 0 [ 0.685280] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.685293] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.689528] Linux agpgart interface v0.103 [ 0.689576] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.689766] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.690390] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.692864] brd: module loaded [ 0.692996] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.693307] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.693355] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.693868] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.694130] mice: PS/2 mouse device common for all mice [ 0.694272] rtc_cmos 00:03: RTC can wake from S4 [ 0.694402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.694471] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.694571] cpuidle: using governor ladder [ 0.694618] cpuidle: using governor menu [ 0.694660] No iBFT detected. [ 0.694960] TCP cubic registered [ 0.695121] NET: Registered protocol family 10 [ 0.695576] lo: Disabled Privacy Extensions [ 0.695832] Mobile IPv6 [ 0.695872] NET: Registered protocol family 17 [ 0.696113] registered taskstats version 1 [ 0.696307] rtc_cmos 00:03: setting system clock to 2009-07-29 07:10:19 UTC (1248851419) [ 0.696416] Freeing unused kernel memory: 560k freed [ 0.696611] Write protecting the kernel read-only data: 3792k [ 0.716848] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.830859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.830973] alloc irq_desc for 18 on cpu 0 node 0 [ 0.830975] alloc kstat_irqs on cpu 0 node 0 [ 0.830983] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.831054] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.831057] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.831179] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.835132] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.835180] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.835197] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00 [ 0.848025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.848099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.851788] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.851842] usb usb1: Product: EHCI Host Controller [ 0.851884] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 0.851928] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.852048] usb usb1: configuration #1 chosen from 1 choice [ 0.852118] hub 1-0:1.0: USB hub found [ 0.852167] hub 1-0:1.0: 6 ports detected [ 0.852539] alloc irq_desc for 23 on cpu 0 node 0 [ 0.852541] alloc kstat_irqs on cpu 0 node 0 [ 0.852547] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.852613] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.852616] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.852704] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.856648] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.856692] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.856708] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800 [ 0.865336] SCSI subsystem initialized [ 0.872026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.872084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.872126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.872177] usb usb2: Product: EHCI Host Controller [ 0.872217] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd [ 0.872259] usb usb2: SerialNumber: 0000:00:1d.7 [ 0.872338] usb usb2: configuration #1 chosen from 1 choice [ 0.872400] hub 2-0:1.0: USB hub found [ 0.872444] hub 2-0:1.0: 6 ports detected [ 0.878030] uhci_hcd: USB Universal Host Controller Interface driver [ 0.878222] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.878274] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.878276] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.878382] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.878470] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800 [ 0.878553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.878602] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.878656] usb usb3: Product: UHCI Host Controller [ 0.878699] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.878744] usb usb3: SerialNumber: 0000:00:1a.0 [ 0.878827] usb usb3: configuration #1 chosen from 1 choice [ 0.878894] hub 3-0:1.0: USB hub found [ 0.878940] hub 3-0:1.0: 2 ports detected [ 0.881875] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.881929] atl1 0000:02:00.0: setting latency timer to 64 [ 0.881975] atl1 0000:02:00.0: version 2.1.3 [ 0.882535] alloc irq_desc for 21 on cpu 0 node 0 [ 0.882538] alloc kstat_irqs on cpu 0 node 0 [ 0.882545] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.882601] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.882604] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.882727] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.882818] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880 [ 0.882900] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.882948] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.883005] usb usb4: Product: UHCI Host Controller [ 0.883050] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.883098] usb usb4: SerialNumber: 0000:00:1a.1 [ 0.883185] usb usb4: configuration #1 chosen from 1 choice [ 0.883258] hub 4-0:1.0: USB hub found [ 0.883307] hub 4-0:1.0: 2 ports detected [ 0.883549] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.883599] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.883602] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.883688] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.883762] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00 [ 0.883838] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.883884] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.883938] usb usb5: Product: UHCI Host Controller [ 0.883982] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.884043] usb usb5: SerialNumber: 0000:00:1a.2 [ 0.884124] usb usb5: configuration #1 chosen from 1 choice [ 0.884190] hub 5-0:1.0: USB hub found [ 0.884238] hub 5-0:1.0: 2 ports detected [ 0.884753] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.884806] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.884809] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.884905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.884984] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080 [ 0.885065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.885111] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.885165] usb usb6: Product: UHCI Host Controller [ 0.885209] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.885255] usb usb6: SerialNumber: 0000:00:1d.0 [ 0.885335] usb usb6: configuration #1 chosen from 1 choice [ 0.885411] hub 6-0:1.0: USB hub found [ 0.885462] hub 6-0:1.0: 2 ports detected [ 0.885979] alloc irq_desc for 19 on cpu 0 node 0 [ 0.885981] alloc kstat_irqs on cpu 0 node 0 [ 0.885987] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.886043] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.886046] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.886151] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.886237] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400 [ 0.886319] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.886366] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.886423] usb usb7: Product: UHCI Host Controller [ 0.886467] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.886514] usb usb7: SerialNumber: 0000:00:1d.1 [ 0.886596] usb usb7: configuration #1 chosen from 1 choice [ 0.886666] hub 7-0:1.0: USB hub found [ 0.886714] hub 7-0:1.0: 2 ports detected [ 0.887212] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.887265] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.887268] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.887356] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.887434] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480 [ 0.887512] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.887559] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.887614] usb usb8: Product: UHCI Host Controller [ 0.887659] usb usb8: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd [ 0.887705] usb usb8: SerialNumber: 0000:00:1d.2 [ 0.887784] usb usb8: configuration #1 chosen from 1 choice [ 0.887852] hub 8-0:1.0: USB hub found [ 0.887908] hub 8-0:1.0: 2 ports detected [ 0.893666] libata version 3.00 loaded. [ 0.909435] ata_piix 0000:00:1f.2: version 2.13 [ 0.909454] alloc irq_desc for 22 on cpu 0 node 0 [ 0.909457] alloc kstat_irqs on cpu 0 node 0 [ 0.909467] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.909520] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.909761] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.909808] scsi0 : ata_piix [ 0.909960] scsi1 : ata_piix [ 0.911218] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22 [ 0.911265] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22 [ 0.911338] ahci 0000:03:00.0: version 3.0 [ 0.911350] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.924081] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.924139] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.924188] ahci 0000:03:00.0: setting latency timer to 64 [ 0.925056] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 0.925107] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.925345] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.929123] scsi2 : ahci [ 0.932529] scsi3 : ata_piix [ 0.932639] scsi4 : ahci [ 0.932767] ata3: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16 [ 0.932826] ata4: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16 [ 0.940710] scsi5 : ata_piix [ 0.942181] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22 [ 0.942234] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22 [ 0.978322] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.978410] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 0.978466] scsi6 : pata_jmicron [ 0.978563] scsi7 : pata_jmicron [ 0.979411] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17 [ 0.979456] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17 [ 1.250604] ata1: SATA link down (SStatus 0 SControl 300) [ 1.272055] ata3: SATA link down (SStatus 0 SControl 300) [ 1.348011] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 1.436028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.436661] ata4.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133 [ 1.436707] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.437479] ata4.00: configured for UDMA/133 [ 1.440070] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.448193] ata5.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66 [ 1.464213] ata5.00: configured for UDMA/66 [ 1.524780] usb 5-1: New USB device found, idVendor=046d, idProduct=c012 [ 1.524826] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.524872] usb 5-1: Product: USB-PS/2 Optical Mouse [ 1.524920] usb 5-1: Manufacturer: Logitech [ 1.525030] usb 5-1: configuration #1 chosen from 1 choice [ 1.582632] ata2: SATA link down (SStatus 0 SControl 300) [ 1.582781] scsi 4:0:0:0: Direct-Access ATA ST3250410AS 3.AA PQ: 0 ANSI: 5 [ 1.583471] scsi 3:0:0:0: CD-ROM ASUS DRW-1814BLT 1.13 PQ: 0 ANSI: 5 [ 1.910577] ata6: SATA link down (SStatus 0 SControl 300) [ 2.084275] Uniform Multi-Platform E-IDE driver [ 2.087101] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.087278] usbcore: registered new interface driver hiddev [ 2.093583] Driver 'sd' needs updating - please use bus_type methods [ 2.093759] sd 4:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB) [ 2.093824] sd 4:0:0:0: [sda] Write Protect is off [ 2.093865] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.093883] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.094012] sda:<6>input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2 [ 2.100054] generic-usb 0003:046D:C012.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.2-1/input0 [ 2.100124] usbcore: registered new interface driver usbhid [ 2.100166] usbhid: v2.6:USB HID core driver [ 2.103355] sda1 sda2 < sda5 > [ 2.129078] sd 4:0:0:0: [sda] Attached SCSI disk [ 2.130936] Driver 'sr' needs updating - please use bus_type methods [ 2.137810] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.137868] Uniform CD-ROM driver Revision: 3.20 [ 2.138005] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.145997] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 2.146069] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.164059] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.10 [ 2.511152] PM: Starting manual resume from disk [ 2.590133] kjournald starting. Commit interval 5 seconds [ 2.590156] EXT3-fs: mounted filesystem with ordered data mode. [ 2.664128] firewire_core: created device fw0: GUID 0011d8000172ea22, S400 [ 4.859299] udev: starting version 141 [ 5.378747] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 5.378812] ACPI: Power Button [PWRF] [ 5.378941] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 [ 5.379001] ACPI: Power Button [PWRB] [ 5.428661] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.528615] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 5.529185] processor ACPI_CPU:00: registered as cooling_device0 [ 5.529526] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 5.530051] processor ACPI_CPU:01: registered as cooling_device1 [ 5.530398] ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM 00000001 INTL 20060113) [ 5.530934] processor ACPI_CPU:02: registered as cooling_device2 [ 5.531295] ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM 00000001 INTL 20060113) [ 5.531830] processor ACPI_CPU:03: registered as cooling_device3 [ 5.853391] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.469649] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.469758] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.745610] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6 [ 8.306985] Adding 9936160k swap on /dev/sda5. Priority:-1 extents:1 across:9936160k [ 8.585490] EXT3 FS on sda1, internal journal [ 9.393892] loop: module loaded [ 9.437522] w83627ehf: Found W83627DHG chip at 0x290 [ 9.485896] coretemp coretemp.0: Using relative temperature scale! [ 9.485979] coretemp coretemp.1: Using relative temperature scale! [ 9.486055] coretemp coretemp.2: Using relative temperature scale! [ 9.486126] coretemp coretemp.3: Using relative temperature scale! [ 9.677791] fuse init (API version 7.11) [ 11.248812] alloc irq_desc for 28 on cpu 0 node 0 [ 11.248814] alloc kstat_irqs on cpu 0 node 0 [ 11.248828] atl1 0000:02:00.0: irq 28 for MSI/MSI-X [ 11.248915] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex [ 17.375971] RPC: Registered udp transport module. [ 17.376026] RPC: Registered tcp transport module. [ 17.475809] Slow work thread pool: Starting up [ 17.476106] Slow work thread pool: Ready [ 17.476183] FS-Cache: Loaded [ 17.541916] FS-Cache: Netfs 'nfs' registered for caching [ 17.564399] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 21.768515] eth0: no IPv6 routers present ** Loaded modules: Module Size Used by nls_utf8 2000 0 nls_cp437 6928 0 vfat 10512 0 fat 48296 1 vfat nls_base 8740 4 nls_utf8,nls_cp437,vfat,fat usb_storage 61456 0 nvidia 9670504 50 binfmt_misc 9244 1 ppdev 7800 0 parport_pc 27064 0 lp 10612 0 parport 38224 3 ppdev,parport_pc,lp pppoe 12200 0 pppox 3720 1 pppoe ppp_generic 25592 2 pppoe,pppox slhc 5680 1 ppp_generic vboxnetadp 82908 0 vboxnetflt 89164 0 vboxdrv 1693292 3 vboxnetflt autofs4 25704 11 acpi_cpufreq 8912 0 cpufreq_powersave 1792 0 cpufreq_userspace 3620 0 cpufreq_conservative 7928 0 cpufreq_stats 4660 0 nfsd 268432 9 exportfs 4624 1 nfsd nfs 257632 1 lockd 68052 2 nfsd,nfs fscache 41480 1 nfs nfs_acl 3264 2 nfsd,nfs auth_rpcgss 40832 2 nfsd,nfs sunrpc 196552 14 nfsd,nfs,lockd,nfs_acl,auth_rpcgss fuse 54544 1 coretemp 6656 0 w83627ehf 22944 0 hwmon_vid 3088 1 w83627ehf loop 15948 0 snd_hda_codec_realtek 250068 1 snd_hda_intel 26680 14 snd_hda_codec 75184 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 8120 1 snd_hda_codec snd_pcm 78440 6 snd_hda_intel,snd_hda_codec snd_timer 21824 5 snd_pcm snd 63848 26 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7984 1 snd i2c_i801 10464 0 asus_atk0110 7744 0 intel_agp 28752 0 i2c_core 25424 2 nvidia,i2c_i801 snd_page_alloc 9936 2 snd_hda_intel,snd_pcm processor 40080 1 acpi_cpufreq evdev 10448 9 pcspkr 2800 0 button 6512 0 ext3 122560 1 jbd 47976 1 ext3 mbcache 8804 1 ext3 sr_mod 15908 0 cdrom 34360 1 sr_mod sd_mod 33656 3 crc_t10dif 2096 1 sd_mod usbhid 37216 0 ide_pci_generic 4964 0 ide_core 104864 1 ide_pci_generic firewire_ohci 22372 0 firewire_core 44852 1 firewire_ohci hid 41296 1 usbhid ata_generic 5924 0 pata_jmicron 4016 0 crc_itu_t 2720 1 firewire_core ata_piix 25108 0 ahci 36448 2 atl1 30776 0 mii 5600 1 atl1 uhci_hcd 22160 0 libata 174892 4 ata_generic,pata_jmicron,ata_piix,ahci scsi_mod 158352 4 usb_storage,sr_mod,sd_mod,libata ehci_hcd 33580 0 thermal 15952 0 fan 5224 0 thermal_sys 16496 3 processor,thermal,fan ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fa000000-fe8fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at b800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at b880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at bc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:829f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe900000-fe9fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport-driver 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at b080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at b400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at b480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC Interface Controller [8086:2918] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at a000 [size=8] Region 1: I/O ports at 9c00 [size=4] Region 2: I/O ports at 9880 [size=8] Region 3: I/O ports at 9800 [size=4] Region 4: I/O ports at 9480 [size=16] Region 5: I/O ports at 9400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] Kernel driver in use: i801_smbus 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 22 Region 0: I/O ports at b000 [size=8] Region 1: I/O ports at ac00 [size=4] Region 2: I/O ports at a880 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a480 [size=16] Region 5: I/O ports at a400 [size=16] Capabilities: <access denied> Kernel driver in use: ata_piix 01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8400 GS [10de:0422] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:3454] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M] Region 5: I/O ports at cc00 [size=128] [virtual] Expansion ROM at fe8e0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia 02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1 Gigabit Ethernet Adapter [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 28 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 03:00.0 SATA controller [0106]: JMicron Technologies, Inc. 20360/20363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at feafe000 (32-bit, non-prefetchable) [size=8K] Expansion ROM at feae0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 03:00.1 IDE interface [0101]: JMicron Technologies, Inc. 20360/20363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:81fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at ec00 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci -- System Information: Debian Release: 5.0 APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores) Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.30-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo linux-image-2.6.30-1-amd64 recommends no packages. Versions of packages linux-image-2.6.30-1-amd64 suggests: ii grub 0.97-27 GRand Unified Bootloader ii linux-doc-2.6.30 2.6.30-1 Linux kernel specific documentatio -- debconf information: linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64: shared/kernel-image/really-run-bootloader: true linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64: linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64: linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk: linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory: linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64: true linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64: linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64: false linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64: linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64: linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true -- rmrfchik.
--- End Message ---
--- Begin Message ---
- To: 540012-done@bugs.debian.org
- Subject: Re: linux-image-2.6.30-1-amd64: Low disk perfromance, system unresponsible on some high io
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Mon, 31 Aug 2009 21:01:56 +0100
- Message-id: <1251748916.4429.205.camel@localhost>
This doesn't look like a bug to me. You're asking dd to allocate a 500MB buffer and write it out all in one go. That means a whole lot of memory will be used for dd's buffer, and again for the block cache. And that single write is uninterruptible. Change the block size to 1MB and count to 500 and you will see different behaviour. Ben. -- Ben Hutchings If at first you don't succeed, you're doing about average.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---