Bug#540012: linux-image-2.6.30-1-amd64: Low disk perfromance, system unresponsible on some high io
Package: linux-image-2.6.30-1-amd64
Version: 2.6.30-1
Severity: important
Simple test:
$ dd if=/dev/zero of=./test.img bs=572041216 count=1
1+0 records in
1+0 records out
572041216 bytes (572 MB) copied, 24.3899 seconds, 23.5 MB/s
It takes 24 seconds to write 572MB. During the dd, the system is
almost unresponsible, even Ctrl-C can't breake the operation.
During regular work, any io load (swapping/paging) freeze the system.
Disk is not so bad:
$ sudo hdparm -t /dev/sda
/dev/sda:
Timing buffered disk reads: 268 MB in 3.02 seconds = 88.84 MB/sec
Here is scheduler used (i tried all, 1-2 MB/s changes):
$ cat /sys/block/sda/queue/scheduler
noop [anticipatory] deadline cfq
Some fs info
$ mount | grep sda
/dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro)
If it does matter, more fs info:
$ sudo tune2fs -l /dev/sda1
tune2fs 1.41.6 (30-May-2009)
Filesystem volume name: <none>
Last mounted on: <not available>
Filesystem UUID: 5cf50667-d82b-49f4-9264-d4d5abf50299
Filesystem magic number: 0xEF53
Filesystem revision #: 1 (dynamic)
Filesystem features: has_journal resize_inode dir_index filetype
needs_recovery sparse_super large_file
Filesystem flags: signed_directory_hash
Default mount options: (none)
Filesystem state: clean
Errors behavior: Continue
Filesystem OS type: Linux
Inode count: 29294592
Block count: 58564949
Reserved block count: 2928247
Free blocks: 3520182
Free inodes: 28231905
First block: 0
Block size: 4096
Fragment size: 4096
Reserved GDT blocks: 1010
Blocks per group: 32768
Fragments per group: 32768
Inodes per group: 16384
Inode blocks per group: 512
Filesystem created: Wed Jan 16 12:44:26 2008
Last mount time: Wed Jul 29 11:10:27 2009
Last write time: Wed Jul 29 11:10:27 2009
Mount count: 9
Maximum mount count: 24
Last checked: Fri May 29 18:52:54 2009
Check interval: 15552000 (6 months)
Next check after: Wed Nov 25 17:52:54 2009
Reserved blocks uid: 0 (user root)
Reserved blocks gid: 0 (group root)
First inode: 11
Inode size: 128
Journal inode: 8
First orphan inode: 19825830
Default directory hash: tea
Directory Hash Seed: c15f0d73-e153-4e2f-a393-831da7105ea9
Journal backup: inode blocks
Hardware info:
-- Package-specific info:
** Version:
Linux version 2.6.30-1-amd64 (Debian 2.6.30-1) (waldi@debian.org) (gcc
version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun Jun 14 15:00:29 UTC 2009
** Command line:
root=/dev/sda1 ro single
** Tainted: P (1)
** Kernel log (I've replaced with more interesting `dmesg`):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-1)
(waldi@debian.org) (gcc version 4.3.3 (Debian 4.3.3-10) ) #1 SMP Sun
Jun 14 15:00:29 UTC 2009
[ 0.000000] Command line: root=/dev/sda1 ro single
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
[ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff80000 page 4k
[ 0.000000] kernel direct mapping tables up to cff80000 @ 10000-16000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
[ 0.000000] RAMDISK: 379cb000 - 37fef43d
[ 0.000000] ACPI: RSDP 00000000000fbcd0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 A_M_I_ OEMXSDT
12000712 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 A_M_I_ OEMFACP
12000712 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff805c0 090A1 (v01 A0751 A0751064
00000064 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000cff8e000 00040
[ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC
12000712 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG
12000712 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM
12000712 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff89670 00038 (v01 A_M_I_ OEMHPET
12000712 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff896b0 000B0 (v01 A_M_I_ OEMOSFR
12000712 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 0000000000042fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007d98cc] TEXT DATA BSS ==>
[0000200000 - 00007d98cc]
[ 0.000000] #3 [00379cb000 - 0037fef43d] RAMDISK ==>
[00379cb000 - 0037fef43d]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #5 [00007da000 - 00007da270] BRK ==>
[00007da000 - 00007da270]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==>
[0000010000 - 0000014000]
[ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==>
[0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD ->
[ffff880028200000-ffff88002bbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff80
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048335
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1601 pages reserved
[ 0.000000] DMA zone: 2326 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
[ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
[ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d4000000 (gap:
d0000000:2ee00000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028022000, static
data 76256 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on.
Total pages: 1029710
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1 ro single
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2405.719 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing 64MB software IO TLB between ffff880020000000 -
ffff880024000000
[ 0.004000] software IO TLB at phys 0x20000000 - 0x24000000
[ 0.004000] Memory: 4055032k/4980736k available (2782k kernel code,
787396k absent, 138308k reserved, 1398k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 4811.43 BogoMIPS (lpj=9622876)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004012] Initializing cgroup subsys cpuacct
[ 0.004054] Initializing cgroup subsys devices
[ 0.004095] Initializing cgroup subsys freezer
[ 0.004135] Initializing cgroup subsys net_cls
[ 0.004200] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004268] CPU: L2 cache: 4096K
[ 0.004308] CPU 0/0x0 -> Node 0
[ 0.004347] CPU: Physical Processor ID: 0
[ 0.004386] CPU: Processor Core ID: 0
[ 0.004431] CPU0: Thermal monitoring enabled (TM2)
[ 0.004473] using mwait in idle threads.
[ 0.005342] ACPI: Core revision 20090320
[ 0.020050] Setting APIC routing to flat
[ 0.020390] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062241] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine..
4810.88 BogoMIPS (lpj=9621773)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.149369] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.149840] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152143] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine..
4810.90 BogoMIPS (lpj=9621802)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 2/0x2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] CPU2: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.245330] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.245799] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248095] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine..
4810.90 BogoMIPS (lpj=9621811)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 3/0x3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] CPU3: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.341338] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
[ 0.344017] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.348012] Brought up 4 CPUs
[ 0.348054] Total of 4 processors activated (19244.13 BogoMIPS).
[ 0.348153] CPU0 attaching sched-domain:
[ 0.348155] domain 0: span 0-1 level MC
[ 0.348157] groups: 0 1
[ 0.348161] domain 1: span 0-3 level CPU
[ 0.348163] groups: 0-1 2-3
[ 0.348167] CPU1 attaching sched-domain:
[ 0.348169] domain 0: span 0-1 level MC
[ 0.348170] groups: 1 0
[ 0.348173] domain 1: span 0-3 level CPU
[ 0.348175] groups: 0-1 2-3
[ 0.348179] CPU2 attaching sched-domain:
[ 0.348180] domain 0: span 2-3 level MC
[ 0.348182] groups: 2 3
[ 0.348185] domain 1: span 0-3 level CPU
[ 0.348187] groups: 2-3 0-1
[ 0.348190] CPU3 attaching sched-domain:
[ 0.348192] domain 0: span 2-3 level MC
[ 0.348194] groups: 3 2
[ 0.348197] domain 1: span 0-3 level CPU
[ 0.348198] groups: 2-3 0-1
[ 0.348296] net_namespace: 1936 bytes
[ 0.348296] Booting paravirtualized kernel on bare hardware
[ 0.348296] regulator: core version 0.5
[ 0.348296] NET: Registered protocol family 16
[ 0.348296] ACPI: bus type pci registered
[ 0.348296] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.348296] PCI: Not using MMCONFIG.
[ 0.348296] PCI: Using configuration type 1 for base access
[ 0.352095] bio: create slab <bio-0> at 0
[ 0.352602] ACPI: EC: Look up EC in DSDT
[ 0.366530] ACPI: Interpreter enabled
[ 0.366576] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.366773] ACPI: Using IOAPIC for interrupt routing
[ 0.366870] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.369383] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.379051] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.388142] ACPI Warning (tbutils-0246): Incorrect checksum in
table [OEMB] - 73, should be 72 [20090320]
[ 0.388365] ACPI: No dock devices found.
[ 0.388467] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.388540] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.388540] pci 0000:00:01.0: PME# disabled
[ 0.388540] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 0.388540] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 0.388540] pci 0000:00:1a.2: reg 20 io port: [0xbc00-0xbc1f]
[ 0.388540] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
[ 0.388540] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.388540] pci 0000:00:1a.7: PME# disabled
[ 0.388570] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[ 0.388605] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.388648] pci 0000:00:1b.0: PME# disabled
[ 0.388735] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.388778] pci 0000:00:1c.0: PME# disabled
[ 0.388880] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.388923] pci 0000:00:1c.4: PME# disabled
[ 0.389012] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.389056] pci 0000:00:1c.5: PME# disabled
[ 0.389140] pci 0000:00:1d.0: reg 20 io port: [0xb080-0xb09f]
[ 0.389200] pci 0000:00:1d.1: reg 20 io port: [0xb400-0xb41f]
[ 0.389259] pci 0000:00:1d.2: reg 20 io port: [0xb480-0xb49f]
[ 0.389321] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
[ 0.389379] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.389423] pci 0000:00:1d.7: PME# disabled
[ 0.389565] pci 0000:00:1f.0: quirk: region 0800-087f claimed by
ICH6 ACPI/GPIO/TCO
[ 0.389617] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.389661] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at
0294 (mask 0003)
[ 0.389757] pci 0000:00:1f.2: reg 10 io port: [0xa000-0xa007]
[ 0.389762] pci 0000:00:1f.2: reg 14 io port: [0x9c00-0x9c03]
[ 0.389767] pci 0000:00:1f.2: reg 18 io port: [0x9880-0x9887]
[ 0.389771] pci 0000:00:1f.2: reg 1c io port: [0x9800-0x9803]
[ 0.389776] pci 0000:00:1f.2: reg 20 io port: [0x9480-0x948f]
[ 0.389781] pci 0000:00:1f.2: reg 24 io port: [0x9400-0x940f]
[ 0.389821] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
[ 0.389832] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.389869] pci 0000:00:1f.5: reg 10 io port: [0xb000-0xb007]
[ 0.389874] pci 0000:00:1f.5: reg 14 io port: [0xac00-0xac03]
[ 0.389879] pci 0000:00:1f.5: reg 18 io port: [0xa880-0xa887]
[ 0.389884] pci 0000:00:1f.5: reg 1c io port: [0xa800-0xa803]
[ 0.389888] pci 0000:00:1f.5: reg 20 io port: [0xa480-0xa48f]
[ 0.389893] pci 0000:00:1f.5: reg 24 io port: [0xa400-0xa40f]
[ 0.389943] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.389951] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 0.389958] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
[ 0.389963] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f]
[ 0.389968] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.390020] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[ 0.390023] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff]
[ 0.390027] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.390066] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
[ 0.390147] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeafe000-0xfeafffff]
[ 0.390156] pci 0000:03:00.0: reg 30 32bit mmio: [0xfeae0000-0xfeaeffff]
[ 0.390185] pci 0000:03:00.0: PME# supported from D3hot
[ 0.390229] pci 0000:03:00.0: PME# disabled
[ 0.390316] pci 0000:03:00.1: reg 10 io port: [0xdc00-0xdc07]
[ 0.390324] pci 0000:03:00.1: reg 14 io port: [0xd880-0xd883]
[ 0.390332] pci 0000:03:00.1: reg 18 io port: [0xd800-0xd807]
[ 0.390340] pci 0000:03:00.1: reg 1c io port: [0xd480-0xd483]
[ 0.390348] pci 0000:03:00.1: reg 20 io port: [0xd400-0xd40f]
[ 0.390430] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
[ 0.390433] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.390483] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.390512] pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9a0000-0xfe9bffff]
[ 0.390543] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.390587] pci 0000:02:00.0: PME# disabled
[ 0.390668] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.390706] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
[ 0.390712] pci 0000:05:03.0: reg 14 io port: [0xec00-0xec7f]
[ 0.390750] pci 0000:05:03.0: supports D2
[ 0.390752] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
[ 0.390796] pci 0000:05:03.0: PME# disabled
[ 0.390872] pci 0000:00:1e.0: transparent bridge
[ 0.390914] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
[ 0.390917] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.392023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.392167] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.392225] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.392335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.392396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.392467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.408957] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.412157] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.412646] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.413136] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.413625] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11
12 14 15) *0, disabled.
[ 0.414184] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.414683] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.415172] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.415597] usbcore: registered new interface driver usbfs
[ 0.415597] usbcore: registered new interface driver hub
[ 0.416026] usbcore: registered new device driver usb
[ 0.416058] PCI: Using ACPI for IRQ routing
[ 0.432040] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.432242] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.456067] pnp: PnP ACPI init
[ 0.456116] ACPI: bus type pnp registered
[ 0.459619] pnp: PnP ACPI: found 14 devices
[ 0.459660] ACPI: ACPI bus type pnp unregistered
[ 0.459707] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.459754] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.459799] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.459841] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.459884] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.459927] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.459971] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.460014] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.460058] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
[ 0.460101] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.460145] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
[ 0.460193] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.460239] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.460283] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.460329] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.460374] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.460417] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.460460] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.460504] system 00:0d: iomem range 0x100000-0xcfffffff could not
be reserved
[ 0.465673] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.465716] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.465759] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
[ 0.465801] pci 0000:00:01.0: PREFETCH window:
0x000000d0000000-0x000000dfffffff
[ 0.465854] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.465895] pci 0000:00:1c.0: IO window: disabled
[ 0.465938] pci 0000:00:1c.0: MEM window: disabled
[ 0.465980] pci 0000:00:1c.0: PREFETCH window:
0x000000f8f00000-0x000000f8ffffff
[ 0.466034] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.466077] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.466120] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.466163] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.466208] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.466249] pci 0000:00:1c.5: IO window: disabled
[ 0.466292] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.466335] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.466379] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.466427] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.466470] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.466513] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.466561] alloc irq_desc for 16 on cpu 0 node 0
[ 0.466563] alloc kstat_irqs on cpu 0 node 0
[ 0.466568] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.466612] pci 0000:00:01.0: setting latency timer to 64
[ 0.466618] alloc irq_desc for 17 on cpu 0 node 0
[ 0.466619] alloc kstat_irqs on cpu 0 node 0
[ 0.466623] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.466666] pci 0000:00:1c.0: setting latency timer to 64
[ 0.466672] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.466716] pci 0000:00:1c.4: setting latency timer to 64
[ 0.466722] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.466765] pci 0000:00:1c.5: setting latency timer to 64
[ 0.466770] pci 0000:00:1e.0: setting latency timer to 64
[ 0.466774] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.466776] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.466778] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.466780] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff]
[ 0.466782] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.466784] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff]
[ 0.466787] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.466788] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.466791] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.466793] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.466795] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.466797] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.466799] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.466904] NET: Registered protocol family 2
[ 0.502319] Switched to high resolution mode on CPU 1
[ 0.502637] Switched to high resolution mode on CPU 3
[ 0.503141] Switched to high resolution mode on CPU 2
[ 0.504400] Switched to high resolution mode on CPU 0
[ 0.512227] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.513436] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[ 0.516784] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.517316] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.517359] TCP reno registered
[ 0.528166] NET: Registered protocol family 1
[ 0.528275] Trying to unpack rootfs image as initramfs...
[ 0.678424] Freeing initrd memory: 6289k freed
[ 0.682331] audit: initializing netlink socket (disabled)
[ 0.682395] type=2000 audit(1248851418.680:1): initialized
[ 0.682932] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.683250] VFS: Disk quotas dquot_6.5.2
[ 0.683334] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.683443] msgmni has been set to 7932
[ 0.683756] alg: No test for stdrng (krng)
[ 0.683870] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.683925] io scheduler noop registered
[ 0.683981] io scheduler anticipatory registered
[ 0.684022] io scheduler deadline registered
[ 0.684098] io scheduler cfq registered (default)
[ 0.684303] pci 0000:01:00.0: Boot video device
[ 0.684478] alloc irq_desc for 24 on cpu 0 node 0
[ 0.684486] alloc kstat_irqs on cpu 0 node 0
[ 0.684499] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.684508] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.684715] alloc irq_desc for 25 on cpu 0 node 0
[ 0.684718] alloc kstat_irqs on cpu 0 node 0
[ 0.684726] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.684739] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.685004] alloc irq_desc for 26 on cpu 0 node 0
[ 0.685006] alloc kstat_irqs on cpu 0 node 0
[ 0.685012] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.685022] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.685269] alloc irq_desc for 27 on cpu 0 node 0
[ 0.685272] alloc kstat_irqs on cpu 0 node 0
[ 0.685280] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.685293] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.689528] Linux agpgart interface v0.103
[ 0.689576] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.689766] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.690390] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.692864] brd: module loaded
[ 0.692996] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 0.693307] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.693355] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 0.693868] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.694130] mice: PS/2 mouse device common for all mice
[ 0.694272] rtc_cmos 00:03: RTC can wake from S4
[ 0.694402] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.694471] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.694571] cpuidle: using governor ladder
[ 0.694618] cpuidle: using governor menu
[ 0.694660] No iBFT detected.
[ 0.694960] TCP cubic registered
[ 0.695121] NET: Registered protocol family 10
[ 0.695576] lo: Disabled Privacy Extensions
[ 0.695832] Mobile IPv6
[ 0.695872] NET: Registered protocol family 17
[ 0.696113] registered taskstats version 1
[ 0.696307] rtc_cmos 00:03: setting system clock to 2009-07-29
07:10:19 UTC (1248851419)
[ 0.696416] Freeing unused kernel memory: 560k freed
[ 0.696611] Write protecting the kernel read-only data: 3792k
[ 0.716848] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 0.830859] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.830973] alloc irq_desc for 18 on cpu 0 node 0
[ 0.830975] alloc kstat_irqs on cpu 0 node 0
[ 0.830983] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.831054] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.831057] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.831179] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 0.835132] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.835180] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.835197] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.848025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.848099] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.851788] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.851842] usb usb1: Product: EHCI Host Controller
[ 0.851884] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 0.851928] usb usb1: SerialNumber: 0000:00:1a.7
[ 0.852048] usb usb1: configuration #1 chosen from 1 choice
[ 0.852118] hub 1-0:1.0: USB hub found
[ 0.852167] hub 1-0:1.0: 6 ports detected
[ 0.852539] alloc irq_desc for 23 on cpu 0 node 0
[ 0.852541] alloc kstat_irqs on cpu 0 node 0
[ 0.852547] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.852613] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.852616] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.852704] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 0.856648] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.856692] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.856708] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.865336] SCSI subsystem initialized
[ 0.872026] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.872084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.872126] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.872177] usb usb2: Product: EHCI Host Controller
[ 0.872217] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 0.872259] usb usb2: SerialNumber: 0000:00:1d.7
[ 0.872338] usb usb2: configuration #1 chosen from 1 choice
[ 0.872400] hub 2-0:1.0: USB hub found
[ 0.872444] hub 2-0:1.0: 6 ports detected
[ 0.878030] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.878222] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.878274] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.878276] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.878382] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 0.878470] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.878553] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.878602] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.878656] usb usb3: Product: UHCI Host Controller
[ 0.878699] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.878744] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.878827] usb usb3: configuration #1 chosen from 1 choice
[ 0.878894] hub 3-0:1.0: USB hub found
[ 0.878940] hub 3-0:1.0: 2 ports detected
[ 0.881875] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.881929] atl1 0000:02:00.0: setting latency timer to 64
[ 0.881975] atl1 0000:02:00.0: version 2.1.3
[ 0.882535] alloc irq_desc for 21 on cpu 0 node 0
[ 0.882538] alloc kstat_irqs on cpu 0 node 0
[ 0.882545] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.882601] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.882604] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.882727] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 0.882818] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.882900] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.882948] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.883005] usb usb4: Product: UHCI Host Controller
[ 0.883050] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.883098] usb usb4: SerialNumber: 0000:00:1a.1
[ 0.883185] usb usb4: configuration #1 chosen from 1 choice
[ 0.883258] hub 4-0:1.0: USB hub found
[ 0.883307] hub 4-0:1.0: 2 ports detected
[ 0.883549] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.883599] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.883602] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.883688] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned
bus number 5
[ 0.883762] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.883838] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.883884] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.883938] usb usb5: Product: UHCI Host Controller
[ 0.883982] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.884043] usb usb5: SerialNumber: 0000:00:1a.2
[ 0.884124] usb usb5: configuration #1 chosen from 1 choice
[ 0.884190] hub 5-0:1.0: USB hub found
[ 0.884238] hub 5-0:1.0: 2 ports detected
[ 0.884753] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.884806] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.884809] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.884905] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 6
[ 0.884984] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.885065] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.885111] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.885165] usb usb6: Product: UHCI Host Controller
[ 0.885209] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.885255] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.885335] usb usb6: configuration #1 chosen from 1 choice
[ 0.885411] hub 6-0:1.0: USB hub found
[ 0.885462] hub 6-0:1.0: 2 ports detected
[ 0.885979] alloc irq_desc for 19 on cpu 0 node 0
[ 0.885981] alloc kstat_irqs on cpu 0 node 0
[ 0.885987] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.886043] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.886046] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.886151] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 7
[ 0.886237] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.886319] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.886366] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.886423] usb usb7: Product: UHCI Host Controller
[ 0.886467] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.886514] usb usb7: SerialNumber: 0000:00:1d.1
[ 0.886596] usb usb7: configuration #1 chosen from 1 choice
[ 0.886666] hub 7-0:1.0: USB hub found
[ 0.886714] hub 7-0:1.0: 2 ports detected
[ 0.887212] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.887265] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.887268] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.887356] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 8
[ 0.887434] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.887512] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.887559] usb usb8: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 0.887614] usb usb8: Product: UHCI Host Controller
[ 0.887659] usb usb8: Manufacturer: Linux 2.6.30-1-amd64 uhci_hcd
[ 0.887705] usb usb8: SerialNumber: 0000:00:1d.2
[ 0.887784] usb usb8: configuration #1 chosen from 1 choice
[ 0.887852] hub 8-0:1.0: USB hub found
[ 0.887908] hub 8-0:1.0: 2 ports detected
[ 0.893666] libata version 3.00 loaded.
[ 0.909435] ata_piix 0000:00:1f.2: version 2.13
[ 0.909454] alloc irq_desc for 22 on cpu 0 node 0
[ 0.909457] alloc kstat_irqs on cpu 0 node 0
[ 0.909467] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.909520] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.909761] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.909808] scsi0 : ata_piix
[ 0.909960] scsi1 : ata_piix
[ 0.911218] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 0.911265] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 0.911338] ahci 0000:03:00.0: version 3.0
[ 0.911350] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.924081] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3
Gbps 0x3 impl SATA mode
[ 0.924139] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.924188] ahci 0000:03:00.0: setting latency timer to 64
[ 0.925056] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.925107] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.925345] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.929123] scsi2 : ahci
[ 0.932529] scsi3 : ata_piix
[ 0.932639] scsi4 : ahci
[ 0.932767] ata3: SATA max UDMA/133 abar m8192@0xfeafe000 port
0xfeafe100 irq 16
[ 0.932826] ata4: SATA max UDMA/133 abar m8192@0xfeafe000 port
0xfeafe180 irq 16
[ 0.940710] scsi5 : ata_piix
[ 0.942181] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.942234] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.978322] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 0.978410] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 0.978466] scsi6 : pata_jmicron
[ 0.978563] scsi7 : pata_jmicron
[ 0.979411] ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 0.979456] ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.250604] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.272055] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.348011] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 1.436028] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.436661] ata4.00: ATA-7: ST3250410AS, 3.AAC, max UDMA/133
[ 1.436707] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 1.437479] ata4.00: configured for UDMA/133
[ 1.440070] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.448193] ata5.00: ATAPI: ASUS DRW-1814BLT, 1.13, max UDMA/66
[ 1.464213] ata5.00: configured for UDMA/66
[ 1.524780] usb 5-1: New USB device found, idVendor=046d, idProduct=c012
[ 1.524826] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.524872] usb 5-1: Product: USB-PS/2 Optical Mouse
[ 1.524920] usb 5-1: Manufacturer: Logitech
[ 1.525030] usb 5-1: configuration #1 chosen from 1 choice
[ 1.582632] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.582781] scsi 4:0:0:0: Direct-Access ATA ST3250410AS
3.AA PQ: 0 ANSI: 5
[ 1.583471] scsi 3:0:0:0: CD-ROM ASUS DRW-1814BLT
1.13 PQ: 0 ANSI: 5
[ 1.910577] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.084275] Uniform Multi-Platform E-IDE driver
[ 2.087101] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level,
low) -> IRQ 16
[ 2.087278] usbcore: registered new interface driver hiddev
[ 2.093583] Driver 'sd' needs updating - please use bus_type methods
[ 2.093759] sd 4:0:0:0: [sda] 488397168 512-byte hardware sectors:
(250 GB/232 GiB)
[ 2.093824] sd 4:0:0:0: [sda] Write Protect is off
[ 2.093865] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093883] sd 4:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.094012] sda:<6>input: Logitech USB-PS/2 Optical Mouse as
/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input2
[ 2.100054] generic-usb 0003:046D:C012.0001: input,hidraw0: USB HID
v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1a.2-1/input0
[ 2.100124] usbcore: registered new interface driver usbhid
[ 2.100166] usbhid: v2.6:USB HID core driver
[ 2.103355] sda1 sda2 < sda5 >
[ 2.129078] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.130936] Driver 'sr' needs updating - please use bus_type methods
[ 2.137810] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 2.137868] Uniform CD-ROM driver Revision: 3.20
[ 2.138005] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.145997] sd 4:0:0:0: Attached scsi generic sg0 type 0
[ 2.146069] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.164059] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI
version 1.10
[ 2.511152] PM: Starting manual resume from disk
[ 2.590133] kjournald starting. Commit interval 5 seconds
[ 2.590156] EXT3-fs: mounted filesystem with ordered data mode.
[ 2.664128] firewire_core: created device fw0: GUID 0011d8000172ea22, S400
[ 4.859299] udev: starting version 141
[ 5.378747] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.378812] ACPI: Power Button [PWRF]
[ 5.378941] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.379001] ACPI: Power Button [PWRB]
[ 5.428661] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.528615] ACPI: SSDT 00000000cff8e0d0 001D2 (v01 AMI CPU1PM
00000001 INTL 20060113)
[ 5.529185] processor ACPI_CPU:00: registered as cooling_device0
[ 5.529526] ACPI: SSDT 00000000cff8e2b0 00143 (v01 AMI CPU2PM
00000001 INTL 20060113)
[ 5.530051] processor ACPI_CPU:01: registered as cooling_device1
[ 5.530398] ACPI: SSDT 00000000cff8e400 00143 (v01 AMI CPU3PM
00000001 INTL 20060113)
[ 5.530934] processor ACPI_CPU:02: registered as cooling_device2
[ 5.531295] ACPI: SSDT 00000000cff8e550 00143 (v01 AMI CPU4PM
00000001 INTL 20060113)
[ 5.531830] processor ACPI_CPU:03: registered as cooling_device3
[ 5.853391] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 6.469649] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 6.469758] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.745610] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
[ 8.306985] Adding 9936160k swap on /dev/sda5. Priority:-1
extents:1 across:9936160k
[ 8.585490] EXT3 FS on sda1, internal journal
[ 9.393892] loop: module loaded
[ 9.437522] w83627ehf: Found W83627DHG chip at 0x290
[ 9.485896] coretemp coretemp.0: Using relative temperature scale!
[ 9.485979] coretemp coretemp.1: Using relative temperature scale!
[ 9.486055] coretemp coretemp.2: Using relative temperature scale!
[ 9.486126] coretemp coretemp.3: Using relative temperature scale!
[ 9.677791] fuse init (API version 7.11)
[ 11.248812] alloc irq_desc for 28 on cpu 0 node 0
[ 11.248814] alloc kstat_irqs on cpu 0 node 0
[ 11.248828] atl1 0000:02:00.0: irq 28 for MSI/MSI-X
[ 11.248915] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 17.375971] RPC: Registered udp transport module.
[ 17.376026] RPC: Registered tcp transport module.
[ 17.475809] Slow work thread pool: Starting up
[ 17.476106] Slow work thread pool: Ready
[ 17.476183] FS-Cache: Loaded
[ 17.541916] FS-Cache: Netfs 'nfs' registered for caching
[ 17.564399] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 21.768515] eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
nls_utf8 2000 0
nls_cp437 6928 0
vfat 10512 0
fat 48296 1 vfat
nls_base 8740 4 nls_utf8,nls_cp437,vfat,fat
usb_storage 61456 0
nvidia 9670504 50
binfmt_misc 9244 1
ppdev 7800 0
parport_pc 27064 0
lp 10612 0
parport 38224 3 ppdev,parport_pc,lp
pppoe 12200 0
pppox 3720 1 pppoe
ppp_generic 25592 2 pppoe,pppox
slhc 5680 1 ppp_generic
vboxnetadp 82908 0
vboxnetflt 89164 0
vboxdrv 1693292 3 vboxnetflt
autofs4 25704 11
acpi_cpufreq 8912 0
cpufreq_powersave 1792 0
cpufreq_userspace 3620 0
cpufreq_conservative 7928 0
cpufreq_stats 4660 0
nfsd 268432 9
exportfs 4624 1 nfsd
nfs 257632 1
lockd 68052 2 nfsd,nfs
fscache 41480 1 nfs
nfs_acl 3264 2 nfsd,nfs
auth_rpcgss 40832 2 nfsd,nfs
sunrpc 196552 14 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
fuse 54544 1
coretemp 6656 0
w83627ehf 22944 0
hwmon_vid 3088 1 w83627ehf
loop 15948 0
snd_hda_codec_realtek 250068 1
snd_hda_intel 26680 14
snd_hda_codec 75184 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 8120 1 snd_hda_codec
snd_pcm 78440 6 snd_hda_intel,snd_hda_codec
snd_timer 21824 5 snd_pcm
snd 63848 26
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 7984 1 snd
i2c_i801 10464 0
asus_atk0110 7744 0
intel_agp 28752 0
i2c_core 25424 2 nvidia,i2c_i801
snd_page_alloc 9936 2 snd_hda_intel,snd_pcm
processor 40080 1 acpi_cpufreq
evdev 10448 9
pcspkr 2800 0
button 6512 0
ext3 122560 1
jbd 47976 1 ext3
mbcache 8804 1 ext3
sr_mod 15908 0
cdrom 34360 1 sr_mod
sd_mod 33656 3
crc_t10dif 2096 1 sd_mod
usbhid 37216 0
ide_pci_generic 4964 0
ide_core 104864 1 ide_pci_generic
firewire_ohci 22372 0
firewire_core 44852 1 firewire_ohci
hid 41296 1 usbhid
ata_generic 5924 0
pata_jmicron 4016 0
crc_itu_t 2720 1 firewire_core
ata_piix 25108 0
ahci 36448 2
atl1 30776 0
mii 5600 1 atl1
uhci_hcd 22160 0
libata 174892 4 ata_generic,pata_jmicron,ata_piix,ahci
scsi_mod 158352 4 usb_storage,sr_mod,sd_mod,libata
ehci_hcd 33580 0
thermal 15952 0
fan 5224 0
thermal_sys 16496 3 processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31
Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8276]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express
PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD
Audio Controller [8086:293e] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:829f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI
Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family)
USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IB (ICH9) LPC
Interface Controller [8086:2918] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801IB (ICH9) 2 port
SATA IDE Controller [8086:2921] (rev 02) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus
Controller [8086:2930] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2
port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8277]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
8400 GS [10de:0422] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:3454]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fe8e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. L1
Gigabit Ethernet Adapter [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at fe9a0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
03:00.0 SATA controller [0106]: JMicron Technologies, Inc. 20360/20363
Serial ATA Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at feafe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at feae0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
03:00.1 IDE interface [0101]: JMicron Technologies, Inc. 20360/20363
Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:824f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_jmicron
05:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306
Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0)
(prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
-- System Information:
Debian Release: 5.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=ru_RU.UTF-8, LC_CTYPE=ru_RU.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.30-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.22 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92a tools for generating an initramfs
ii module-init-tools 3.7-pre9-1 tools for managing Linux kernel mo
linux-image-2.6.30-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-1-amd64 suggests:
ii grub 0.97-27 GRand Unified Bootloader
ii linux-doc-2.6.30 2.6.30-1 Linux kernel specific documentatio
-- debconf information:
linux-image-2.6.30-1-amd64/preinst/initrd-2.6.30-1-amd64:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-1-amd64/postinst/create-kimage-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/abort-overwrite-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.30-1-amd64/postinst/old-dir-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/old-initrd-link-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.30-1-amd64/preinst/lilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/removing-running-kernel-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/prerm/would-invalidate-boot-loader-2.6.30-1-amd64:
true
linux-image-2.6.30-1-amd64/preinst/elilo-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/bootloader-initrd-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/preinst/overwriting-modules-2.6.30-1-amd64: true
linux-image-2.6.30-1-amd64/postinst/depmod-error-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/failed-to-move-modules-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/depmod-error-initrd-2.6.30-1-amd64: false
linux-image-2.6.30-1-amd64/preinst/abort-install-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/bootloader-test-error-2.6.30-1-amd64:
linux-image-2.6.30-1-amd64/postinst/old-system-map-link-2.6.30-1-amd64: true
--
rmrfchik.
Reply to: