Bug#541630: ATI Rage 128 Pro Ultra TF doesn't start with linux-image-2.6.30-1-686
---------- Forwarded message ----------
From: advocatux <advocatux@gmail.com>
Date: 2009/8/16
Subject: Re: Bug#541630: ATI Rage 128 Pro Ultra TF doesn't start with
linux-image-2.6.30-1-686
To: Ben Hutchings <ben@decadent.org.uk>
Cc: 41630@bugs.debian.org
2009/8/16 Ben Hutchings <ben@decadent.org.uk>:
[...]
> I have put a new version of the module up in the same location. Please
> try again with this version.
Unfortunatley it doesn't work either (unless I'm doing something wrong).
At first attempt that's what kern.log says:
kernel: imklog 4.2.0, log source = /proc/kmsg started.
kernel: [ 373.834658] [drm] Module unloaded
kernel: [ 396.585897] [drm] Initialized r128 2.5.0 20030725 for
0000:01:00.0 on minor 0
kernel: [ 413.491987] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
kernel: [ 413.492092] agpgart-intel 0000:00:00.0: putting AGP V2
device into 1x mode
kernel: [ 413.492125] pci 0000:01:00.0: putting AGP V2 device into 1x mode
kernel: [ 413.516303] platform r128_cce.0: firmware: requesting
r128/r128_cce.bin
kernel: [ 413.532399] r128_cce: Failed to load firmware "r128/r128_cce.bin"
kernel: [ 413.532417] [drm:r128_do_init_cce] *ERROR* Failed to load firmware!
kernel: [ 413.532590] [drm:r128_cce_stop] *ERROR* called with no initialization
kernel: [ 840.604196] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
kernel: [ 840.604229] agpgart-intel 0000:00:00.0: putting AGP V2
device into 1x mode
kernel: [ 840.604262] pci 0000:01:00.0: putting AGP V2 device into 1x mode
kernel: [ 840.715425] platform r128_cce.0: firmware: requesting
r128/r128_cce.bin
kernel: [ 840.796697] r128_cce: Failed to load firmware "r128/r128_cce.bin"
kernel: [ 840.796714] [drm:r128_do_init_cce] *ERROR* Failed to load firmware!
kernel: [ 840.796887] [drm:r128_cce_stop] *ERROR* called with no initialization
Of course, module was loaded:
# lsmod | grep r128
r128 30824 0
drm 137920 1 r128
At second attempt, I rebooted the machine and tried again, but this
time with the module loaded already and it fails once more:
kernel: [ 30.211945] [drm] Initialized drm 1.1.0 20060810
kernel: [ 30.233255] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
kernel: [ 30.233264] PCI: setting IRQ 5 as level-triggered
kernel: [ 30.233276] pci 0000:01:00.0: PCI INT A -> Link[LNKA] ->
GSI 5 (level, low) -> IRQ 5
kernel: [ 30.233637] [drm] Initialized r128 2.5.0 20030725 for
0000:01:00.0 on minor 0
kernel: [ 30.326581] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
kernel: [ 30.326612] agpgart-intel 0000:00:00.0: putting AGP V2
device into 1x mode
kernel: [ 30.326644] pci 0000:01:00.0: putting AGP V2 device into 1x mode
kernel: [ 30.388709] platform r128_cce.0: firmware: requesting
r128/r128_cce.bin
kernel: [ 30.444762] r128_cce: Failed to load firmware "r128/r128_cce.bin"
kernel: [ 30.444781] [drm:r128_do_init_cce] *ERROR* Failed to load firmware!
kernel: [ 30.444986] BUG: unable to handle kernel NULL pointer
dereference at 00000094
kernel: [ 30.444996] IP: [<d884e83c>] r128_cce_stop+0x6a/0xdd [r128]
kernel: [ 30.445016] *pde = 00000000
kernel: [ 30.445022] Oops: 0000 [#1] SMP
kernel: [ 30.445028] last sysfs file:
/sys/devices/platform/r128_cce.0/firmware/r128_cce.0/loading
kernel: [ 30.445034] Modules linked in: r128 drm sco ppdev lp bridge
stp bnep rfcomm l2cap bluetooth speedstep_lib cpufreq_conservative
cpufreq_userspace cpufreq_powersave cpufreq_stats ext2 fuse loop
snd_intel8x0 snd_wavefront snd_ac97_codec snd_cs4236 ac97_bus
snd_wss_lib snd_pcm_oss snd_opl3_lib snd_mixer_oss snd_hwdep
snd_mpu401 snd_mpu401_uart snd_pcm snd_seq_midi snd_rawmidi
snd_seq_midi_event snd_seq i2c_i801 snd_timer snd_seq_device shpchp
serio_raw i2c_core rng_core snd pci_hotplug pcspkr ns558 evdev
soundcore snd_page_alloc psmouse gameport parport_pc parport processor
button ext3 jbd mbcache dm_mirror dm_region_hash dm_log dm_snapshot
dm_mod ide_cd_mod cdrom ide_gd_mod ide_pci_generic ata_generic libata
scsi_mod uhci_hcd ehci_hcd piix 8139cp intel_agp 8139too mii ide_core
usbcore agpgart floppy thermal fan thermal_sys
kernel: [ 30.445170]
kernel: [ 30.445178] Pid: 3195, comm: Xorg Not tainted (2.6.30-1-686 #1)
kernel: [ 30.445184] EIP: 0060:[<d884e83c>] EFLAGS: 00013202 CPU: 0
kernel: [ 30.445194] EIP is at r128_cce_stop+0x6a/0xdd [r128]
kernel: [ 30.445200] EAX: 80000001 EBX: d768ba80 ECX: d886e000 EDX: d6196600
kernel: [ 30.445207] ESI: 00000000 EDI: d61a7e98 EBP: d63a4800 ESP: d61a7e7c
kernel: [ 30.445212] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
kernel: [ 30.445220] Process Xorg (pid: 3195, ti=d61a6000
task=d6a9f610 task.ti=d61a6000)
kernel: [ 30.445224] Stack:
kernel: [ 30.445228] d61a7e98 00000042 40086442 d768ba80 d897a67f
d63a4800 d884e7d2 00000001
kernel: [ 30.445242] 00000001 00000000 80000000 00000001 00100000
00002710 00000020 00000000
kernel: [ 30.445256] 00000480 003ce400 00000480 00000020 0079a400
00000480 00b66400 d4000000
kernel: [ 30.445272] Call Trace:
kernel: [ 30.445277] [<d897a67f>] ? drm_ioctl+0x1ca/0x24b [drm]
kernel: [ 30.445316] [<d884e7d2>] ? r128_cce_stop+0x0/0xdd [r128]
kernel: [ 30.445334] [<c01971e4>] ? vfs_ioctl+0x49/0x5f
kernel: [ 30.445347] [<c019763e>] ? do_vfs_ioctl+0x444/0x47f
kernel: [ 30.445356] [<c018cfe6>] ? fsnotify_modify+0x4c/0x53
kernel: [ 30.445367] [<c018d1da>] ? do_sync_write+0x0/0x107
kernel: [ 30.445375] [<c018dc12>] ? vfs_write+0x9e/0xd6
kernel: [ 30.445383] [<c01976ba>] ? sys_ioctl+0x41/0x58
kernel: [ 30.445392] [<c0103014>] ? sysenter_do_call+0x12/0x28
kernel: [ 30.445403] Code: 72 40 25 00 00 00 80 50 68 74 2d 85 d8 68
74 2d 85 d8 68 1c 31 85 d8 e8 89 e3 ac e7 b8 ea ff ff ff 83 c4 18 eb
73 83 3f 00 74 26 <8b> 86 94 00 00 00 8b 40 10 05 14 07 00 00 8b 10 8b
86 94 00 00
kernel: [ 30.445481] EIP: [<d884e83c>] r128_cce_stop+0x6a/0xdd
[r128] SS:ESP 0068:d61a7e7c
kernel: [ 30.445494] CR2: 0000000000000094
kernel: [ 30.445502] ---[ end trace 74d5c64c139c8be1 ]---
kernel: [ 30.455921] [drm:drm_release] *ERROR* Device busy: 1
Do you want another kind of test?
Regards.
P.S. I'm forwarding this email because at first attempt the bug number was bad.
Reply to: