--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.25: firewire ipod no longer works under kernels >= 2.6.22 with new firewire stack
- From: Alec Robertson <alec.robertson@gmail.com>
- Date: Mon, 28 Apr 2008 22:20:04 -0400
- Message-id: <20080429022004.13060.3472.reportbug@cwf.mit.edu>
Package: linux-image-2.6.25-rc8-686
Version: 2.6.25~rc8-1~experimental.1~snapshot.11067
Severity: normal
File: linux-image-2.6.25
My firewire ipod no longer works with either the new juju firewire stack
(firewire_sbp2) nor the old ieee1394 (sbp2) stack. The ipod has worked for
many years prior to the switch in 2.6.22 to the new stack. The ipod
works on macs and pcs so it's not an ipod error.
The ipod connects fine and I can see the music, but when I try to write
anything (either with gnupod, gtkpod or amarok) then the ipod just sits
there with the hard drive clicking over every 5-10 seconds in what
sounds to be a reset noise. The system slows to a crawl and the only way
I can resume is to pull out the firewire pcmcia card. Interestingly, the
problem/symptoms seem consistent between the two stacks?
I raised these issues in bug #475295 but that seems to have devolved
into an "old vs new" flamefest and I'm afraid my useability concerns got
lost in there :(
I understand the need for secure and clean code for the firewire stack,
but arguing that the userspace applications need to catch up to a stack
that doesn't even work is not an argument. Meanwhile, my ipod continues
not to work.
-- Package-specific info:
** Version:
Linux version 2.6.25-rc8-686 (Debian 2.6.25~rc8-1~experimental.1~snapshot.11067) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14+2)) #1 SMP Fri Apr 11 00:53:51 UTC 2008
** Command line:
root=/dev/hda2 ro acpi_sleep=s3_bios
** Not tainted
** Kernel log:
[53162.617483] PM: Syncing filesystems ... done.
[53164.385786] Freezing user space processes ... (elapsed 0.08 seconds) done.
[53164.472410] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[53164.472628] Suspending console(s)
[53164.490373] drm_sysfs_suspend
[53166.086465] serial 00:09: disabled
[53166.209878] ACPI: PCI interrupt for device 0000:02:02.0 disabled
[53166.225838] ACPI: PCI interrupt for device 0000:02:01.0 disabled
[53166.225844] ACPI handle has no context!
[53166.241853] radeonfb (0000:01:00.0): suspending for event: 2...
[53166.242194] ACPI: PCI interrupt for device 0000:00:1f.5 disabled
[53166.242346] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[53166.259430] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[53166.259458] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[53166.259484] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[53166.261508] ACPI: Preparing to enter system sleep state S3
[53166.270720] Disabling non-boot CPUs ...
[53166.270720] Intel machine check architecture supported.
[53166.270728] Intel machine check reporting enabled on CPU#0.
[53166.270764] Back to C!
[53166.319014] PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
[53166.319021] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[53166.319029] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[53166.319035] PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
[53166.319046] PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801)
[53166.319076] usb usb1: root hub lost power or was reset
[53166.319091] PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
[53166.319094] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
[53166.319101] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[53166.319107] PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
[53166.319119] PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821)
[53166.319146] usb usb2: root hub lost power or was reset
[53166.319165] PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
[53166.319168] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[53166.319175] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[53166.319181] PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
[53166.319192] PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841)
[53166.319220] usb usb3: root hub lost power or was reset
[53166.335315] PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
[53166.335315] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
[53166.335315] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[53166.335315] PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
[53166.335315] PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing c0000000)
[53166.335315] PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900006, writing 2900106)
[53166.335315] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[53166.335315] PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 50000000)
[53166.335315] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007)
[53166.335315] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[53166.335315] PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
[53166.335315] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[53166.335315] PCI: Setting latency timer of device 0000:00:1f.5 to 64
[53167.343435] PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001)
[53167.343445] radeonfb (0000:01:00.0): resuming from state: 2...
[53167.657017] PM: Writing back config space on device 0000:02:01.0 at offset f (was ff0100, writing ff010b)
[53167.657030] PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 1, writing 8001)
[53167.657035] PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing c0200000)
[53167.657040] PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing c0220000)
[53167.657045] PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4008)
[53167.657051] PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2300000, writing 2300117)
[53167.657069] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[53167.705004] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
[53168.012868] serial 00:09: activated
[53168.990363] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[53169.003468] hda: UDMA/100 mode selected
[53169.026814] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[53169.026878] hdc: UDMA/33 mode selected
[53171.296326] Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
[53171.328732] done.
[53171.417762] usb 2-1: USB disconnect, address 5
[53171.546977] hub 2-0:1.0: over-current change on port 2
[53171.666824] hub 4-0:1.0: over-current change on port 3
[53171.954012] hub 4-0:1.0: over-current change on port 4
[53172.297003] usb 2-1: new low speed USB device using uhci_hcd and address 6
[53172.473124] usb 2-1: configuration #1 chosen from 1 choice
[53172.487083] input: Logitech USB Receiver as /class/input/input16
[53172.487318] input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1
[53172.495012] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[53172.495012] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[53172.495012] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[53172.495012] [drm] Loading R300 Microcode
[53172.514455] Fixing up Logitech keyboard report descriptor
[53172.515275] input: Logitech USB Receiver as /class/input/input17
[53172.516280] input,hiddev96,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1
[53172.516363] usb 2-1: New USB device found, idVendor=046d, idProduct=c50c
[53172.516366] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[53172.516369] usb 2-1: Product: USB Receiver
[53172.516372] usb 2-1: Manufacturer: Logitech
[53956.389350] tun0: Disabled Privacy Extensions
[102566.889569] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[102566.889586] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[102566.889617] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[102568.159781] [drm] Setting GART location based on new memory map
[102568.159792] [drm] Loading R300 Microcode
[102568.159847] [drm] writeback test succeeded in 2 usecs
[102597.333588] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[102597.333606] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[102597.333637] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[102598.592206] [drm] Setting GART location based on new memory map
[102598.592217] [drm] Loading R300 Microcode
[102598.592272] [drm] writeback test succeeded in 2 usecs
** Loaded modules:
Module Size Used by
thermal 19100 0
isofs 32740 0
zlib_inflate 14496 1 isofs
vfat 12160 0
fat 46880 1 vfat
nls_base 7268 3 isofs,vfat,fat
sd_mod 26072 0
usb_storage 75648 0
cpufreq_ondemand 8428 0
radeon 113152 2
drm 72280 3 radeon
cpufreq_stats 5216 0
tun 10976 0
arc4 2016 2
ecb 3552 2
crypto_blkcipher 18116 1 ecb
ieee80211_crypt_wep 4896 1
fan 5636 0
button 8240 0
ipv6 241988 12
acpi_cpufreq 9228 1
freq_table 4512 3 cpufreq_ondemand,cpufreq_stats,acpi_cpufreq
radeonfb 96672 1
fb_ddc 2624 1 radeonfb
i2c_algo_bit 5892 1 radeonfb
ata_piix 20004 0
loop 16708 0
pcmcia 36044 0
snd_intel8x0 31740 0
snd_ac97_codec 91300 1 snd_intel8x0
ac97_bus 1952 1 snd_ac97_codec
snd_pcm_oss 37824 0
snd_mixer_oss 14880 1 snd_pcm_oss
ipw2100 65232 0
snd_pcm 68228 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
ieee80211 30664 1 ipw2100
ieee80211_crypt 5860 2 ieee80211_crypt_wep,ieee80211
snd_timer 21352 1 snd_pcm
serio_raw 6532 0
firmware_class 9088 2 pcmcia,ipw2100
yenta_socket 24300 2
rsrc_nonstatic 11584 1 yenta_socket
pcmcia_core 36436 3 pcmcia,yenta_socket,rsrc_nonstatic
psmouse 35920 0
rtc 14272 0
snd 48804 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
iTCO_wdt 11204 0
i2c_i801 9520 0
i2c_core 22548 4 radeonfb,fb_ddc,i2c_algo_bit,i2c_i801
soundcore 7488 1 snd
snd_page_alloc 9992 2 snd_intel8x0,snd_pcm
rng_core 4900 0
battery 8448 0
ac 4448 0
bay 6176 0
video 19728 0
output 3712 1 video
shpchp 29716 0
pci_hotplug 26948 1 shpchp
intel_agp 25148 1
agpgart 31720 2 drm,intel_agp
evdev 11328 0
thinkpad_acpi 52864 0
nvram 8396 1 thinkpad_acpi
ext3 120264 1
jbd 43444 1 ext3
mbcache 8260 1 ext3
ide_cd_mod 32864 1
cdrom 31872 1 ide_cd_mod
ide_disk 13952 3
ata_generic 8004 0
libata 142032 2 ata_piix,ata_generic
scsi_mod 138508 3 sd_mod,usb_storage,libata
usbhid 40192 0
hid 36032 1 usbhid
ff_memless 5384 1 usbhid
piix 7176 0 [permanent]
e1000 107712 0
ide_pci_generic 4228 0 [permanent]
ide_core 100312 4 ide_cd_mod,ide_disk,piix,ide_pci_generic
ehci_hcd 32268 0
uhci_hcd 22352 0
usbcore 129552 5 usb_storage,usbhid,ehci_hcd,uhci_hcd
dock 10448 2 bay,libata
processor 39660 3 thermal,acpi_cpufreq
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O Controller [8086:3340] (rev 03)
Subsystem: IBM Thinkpad T40 series [1014:0529]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP Controller [8086:3341] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 96
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 01) (prog-if 00 [UHCI])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 01) (prog-if 20 [EHCI])
Subsystem: IBM ThinkPad [1014:052e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 81) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
I/O behind bridge: 00004000-00008fff
Memory behind bridge: c0200000-cfffffff
Prefetchable memory behind bridge: e8000000-efffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1860 [size=16]
Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 01)
Subsystem: IBM ThinkPad [1014:052d]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 4: I/O ports at 1880 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 01)
Subsystem: IBM ThinkPad T41 [1014:0537]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 01) (prog-if 00 [Generic])
Subsystem: IBM ThinkPad [1014:0525]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 5
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: <access denied>
Kernel modules: snd-intel8x0m
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M10 NT [FireGL Mobility T2] [1002:4e54] (rev 80) (prog-if 00 [VGA controller])
Subsystem: IBM Unknown device [1014:054f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: radeonfb
Kernel modules: radeonfb
02:00.0 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
Subsystem: IBM ThinkPad [1014:0552]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: e8000000-ebfff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:00.1 CardBus bridge [0607]: Texas Instruments PCI4520 PC card Cardbus Controller [104c:ac46] (rev 01)
Subsystem: IBM ThinkPad [1014:0552]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at b1000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
Memory window 0: ec000000-effff000 (prefetchable)
Memory window 1: c8000000-cbfff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
02:01.0 Ethernet controller [0200]: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) [8086:101e] (rev 03)
Subsystem: IBM Thinkpad [1014:0549]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
Region 2: I/O ports at 8000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e1000
Kernel modules: e1000
02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter [8086:1043] (rev 04)
Subsystem: Intel Corporation Unknown device [8086:2551]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at c0214000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ipw2100
Kernel modules: ipw2100
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.25-rc8-686 (SMP w/1 CPU core)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.25-rc8-686 depends on:
ii debconf [debconf-2.0] 1.5.21 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.25-rc8-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.25-rc8-686/preinst/abort-overwrite-2.6.25-rc8-686:
linux-image-2.6.25-rc8-686/preinst/initrd-2.6.25-rc8-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.25-rc8-686/postinst/depmod-error-2.6.25-rc8-686: false
linux-image-2.6.25-rc8-686/postinst/bootloader-error-2.6.25-rc8-686:
linux-image-2.6.25-rc8-686/postinst/create-kimage-link-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/postinst/old-dir-initrd-link-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/postinst/bootloader-test-error-2.6.25-rc8-686:
linux-image-2.6.25-rc8-686/prerm/would-invalidate-boot-loader-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/preinst/failed-to-move-modules-2.6.25-rc8-686:
linux-image-2.6.25-rc8-686/preinst/overwriting-modules-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/preinst/lilo-initrd-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/preinst/lilo-has-ramdisk:
linux-image-2.6.25-rc8-686/postinst/old-system-map-link-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/preinst/abort-install-2.6.25-rc8-686:
linux-image-2.6.25-rc8-686/preinst/bootloader-initrd-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/postinst/depmod-error-initrd-2.6.25-rc8-686: false
linux-image-2.6.25-rc8-686/postinst/kimage-is-a-directory:
linux-image-2.6.25-rc8-686/prerm/removing-running-kernel-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/preinst/elilo-initrd-2.6.25-rc8-686: true
linux-image-2.6.25-rc8-686/postinst/old-initrd-link-2.6.25-rc8-686: true
--- End Message ---