Bug#482972: linux-image-2.6.24-1-amd64: 10 in 1 USB card reader doesn't work
On Mon, May 26, 2008 at 12:07:09PM +0200, Martin Unzner wrote:
> Package: linux-image-2.6.24-1-amd64
> Version: 2.6.24-7
> Severity: normal
please try out 2.6.25 from unstable just installs fine in testing.
> Hello guys,
>
> this bug has been reported earlier by me, but now I'm running
> Debian Lenny with a recent kernel, and the problem is still the same:
care to name the bug nr?
> My
> 10 in 1 USB Card Reader doesn't work with Debian. Whenever I plug my 2
> GB SD Card on other computers or on another system supplied with my
> computer, it works perfectly, but in Debian, I can't see more than the
> file structure, reading from and writing to the card is impossible. I
> suppose the reason lies within these lines that dmesg outputs when I
> plug
> the card reader:
>
> usb 6-1: new high speed USB device using ehci_hcd and address 5
> usb 6-1: configuration #1 chosen from 1 choice
> scsi6 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 5
> usb-storage: waiting for device to settle before scanning
> usb-storage: device scan complete
> scsi 6:0:0:0: Direct-Access GENERIC USB Storage-CFC I19B PQ: 0
> ANSI: 0 CCS
> scsi 6:0:0:1: Direct-Access GENERIC USB Storage-MSC I19B PQ: 0
> ANSI: 0 CCS
> scsi 6:0:0:2: Direct-Access GENERIC USB Storage-SMC I19B PQ: 0
> ANSI: 0 CCS
> scsi 6:0:0:3: Direct-Access GENERIC USB Storage-SDC I19B PQ: 0
> ANSI: 0 CCS
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:1: [sdc] Attached SCSI removable disk
> sd 6:0:0:2: [sdd] Attached SCSI removable disk
> sd 6:0:0:3: [sde] 2011136 512-byte hardware sectors (1030 MB)
> sd 6:0:0:3: [sde] Write Protect is off
> sd 6:0:0:3: [sde] Mode Sense: 03 00 00 00
> sd 6:0:0:3: [sde] Assuming drive cache: write through
> sd 6:0:0:3: [sde] 2011136 512-byte hardware sectors (1030 MB)
> sd 6:0:0:3: [sde] Write Protect is off
> sd 6:0:0:3: [sde] Mode Sense: 03 00 00 00
> sd 6:0:0:3: [sde] Assuming drive cache: write through
> sde: sde1
> sde: p1 exceeds device capacity
> sd 6:0:0:3: [sde] Attached SCSI removable disk
> attempt to access beyond end of device
> sde: rw=0, want=4022132, limit=2011136
> printk: 167 messages suppressed.
> Buffer I/O error on device sde1, logical block 4021888
> attempt to access beyond end of device
> sde: rw=0, want=4022133, limit=2011136
> Buffer I/O error on device sde1, logical block 4021889
> ....
>
> 1030 MB is definitely not correct. I'm not a USB expert, but maybe the
> hardware sector size is not 512 Bytes but 1024? Just a suggestion, but
> something definitely goes wrong in the usb-storage module. usbview shows
> the following information about the card reader:
--
maks
Reply to: