Bug#466600: Does not detect/mount cpqarray RAIDed volume
Hi,
we have the same problem here, with 2.6.22-3-686. The kernel from stable
(2.6.18-6-686) just works fine. Seems like a bug introduced in a later
version.
I attach the info requested:
* cat /proc/cmdline
root=/dev/ida/c0d0p2 ro
* cat /proc/modules
ide_generic 1216 0 [permanent], Live 0xf884d000
ide_cd 36416 0 - Live 0xf9901000
cdrom 32832 1 ide_cd, Live 0xf990c000
ata_generic 7556 0 - Live 0xf881600
libata 115984 1 ata_generic, Live 0xf88a5000
generic 4836 0 [permanent], Live 0xf884a000
aic7xxx 156856 - Live 0xf9934000
tg3 100260 0 - Live 0xf88e0000
serverworks 7528 0 [permanent], Live 0xf8820000
ide_core 113764 4 ide_generic,ide_cd,generic,serverworks, Live 0xf88c3000
e100 33644 0 - Live 0xf8851000
mii 5280 1 e100, Live 0xf8842000
floppy 54884 0 - Live 0xf889600
cpqarray 20004 0 - Live 0xf883c000
sym53c8xx 68116 0 - Live 0xf8884000
scsi_transport_spi 23072 2 aic7xxx,sym53c8xx, Live 0xf883500
scsi_mod 136620 4 libata,aic7xxx,sym53c8xx,scsi_transport_spi, Live 0xf8861000
thermal 13416 0 - Live 0xf8830000
processor 31176 1 thermal, Live 0xf8827000
fan 4836 0 - Live 0xf8819000
* ls -l /dev/ida
brw-rw---- 1 0 0 72, 0 Feb 20 22:45 c0d0
* cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/ida/c0d0p2 / ext3 defaults,errors=remount-ro 0 1
/dev/ida/c0d0p1 /boot ext3 defaults 0 2
/dev/ida/c0d0p5 /home xfs defaults 0 2
/dev/ida/c0d0p7 /tmp ext3 defaults 0 2
/dev/ida/c0d0p6 /var xfs defaults 0 2
/dev/ida/c0d0p3 none swap sw 0 0
/dev/hda /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
* dpkg -l grub
ii grub 0.97-28 GRand Unified Bootloader
* dpkg -l udev
ii udev 0.114-2 /dev/ and hotplug management daemon
* dpkg -l initramfs-tools
ii initramfs-tool 0.90a tools for generating an initramfs
* lspci -vv
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 32 bytes
00:01.0 RAID bus controller: LSI Logic / Symbios Logic 53C1510 (rev 02)
Subsystem: Compaq Computer Corporation Integrated Array Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 192 (7500ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 185
Region 0: I/O ports at 2000 [size=256]
Region 1: Memory at c5000000 (32-bit, non-prefetchable) [size=16M]
Region 2: Memory at c4000000 (32-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 50100000 [disabled] [size=512K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 08)
Subsystem: Compaq Computer Corporation NC3163 Fast Ethernet NIC
(embedded, WOL)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 201
Region 0: Memory at c3fff000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2400 [size=64]
Region 2: Memory at c3e00000 (32-bit, non-prefetchable) [size=1M]
[virtual] Expansion ROM at 50000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00:03.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC
[Mach64 GT IIC] (rev 7a) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage IIC
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at c2000000 (32-bit, prefetchable) [size=16M]
Region 1: I/O ports at 2800 [size=256]
Region 2: Memory at c3dff000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50180000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:04.0 System peripheral: Compaq Computer Corporation Advanced System
Management Controller
Subsystem: Compaq Computer Corporation Unknown device b0f3
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at c3dfef00 (32-bit, non-prefetchable) [size=256]
00:05.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
Subsystem: Adaptec AHA-2904/Integrated AIC-7850
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 177
Region 0: I/O ports at 2c00 [disabled] [size=256]
Region 1: Memory at c3dfd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 51)
Subsystem: Broadcom OSB4 South Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master SecP
PriP])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 3000 [size=16]
03:06.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5700 Gigabit
Ethernet (rev 12)
Subsystem: 3Com Corporation 3C996-T 1000Base-T
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 193
Region 0: Memory at c6ff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO+ RBC=512 OST=1
Status: Dev=ff:1f.1 64bit+ 133MHz+ SCD- USC- DC=simple
DMMRBC=512 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+
Queue=0/3 Enable-
Address: 01535d609566ccb8 Data: a908
* lspci -n
00:00.0 0600: 1166:0009 (rev 05)
00:00.1 0600: 1166:0009 (rev 05)
00:01.0 0104: 1000:0010 (rev 02)
00:02.0 0200: 8086:1229 (rev 08)
00:03.0 0300: 1002:4756 (rev 7a)
00:04.0 0880: 0e11:a0f0
00:05.0 0100: 9004:5078 (rev 03)
00:0f.0 0601: 1166:0200 (rev 51)
00:0f.1 0101: 1166:0211
03:06.0 0200: 14e4:1644 (rev 12)
Reply to: