--- Begin Message ---
Subject: linux-image-2.6.24-1-amd64: AMD64 Dual-Core clock skew of 2.5%
Package: linux-image-2.6.24-1-amd64
Version: 2.6.24-4
Severity: important
My system clock loses 7.5s every 5 minutes, for what appears to be a
very consistent 2.5% clock skew. The hardware clock appears to be very
steady.
I'm running an AMD64 x2 5600 on an Asus M2N-SLI Deluxe MB. I've tried
disabling HPET on the MB. I've tried booting with "noapic," with
"no_timer_check," with combinations of those and other flags, and just
about any other recipe I've been able to find on the web. I've tried
enabling Powernow and AMD Live on the MB.
I can't run ntp because the clock skews are too drastic -- the daemon
never peers.
I'm open for suggestions, up to and including building a custom
module/kernel with "Enhanced RTC option," about which I've seen hints
but no documentation.
Please let me know if you need any additional information. In the
meantime, I'm re-setting the clock via ntpdate-debian every 5 minutes
from a server on my subnet.
While I see this in the latest kernel, I haven't been able to get this
working in, e.g., 2.6.18 either.
-- Package-specific info:
** Version:
Linux version 2.6.24-1-amd64 (Debian 2.6.24-4) (waldi@debian.org) (gcc
version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19)) #1 SMP Mon Feb 11
13:47:43 UTC 2008
** Command line:
root=/dev/md/root data=journal ro
** Tainted: P (1)
** Kernel log:
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
ReiserFS: md_d126: found reiserfs format "3.6" with standard journal
ReiserFS: md_d126: using ordered data mode
ReiserFS: md_d126: journal params: device md_d126, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
ReiserFS: md_d126: checking transaction log (md_d126)
ReiserFS: md_d126: Using r5 hash to sort names
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: PC Speaker as /class/input/input4
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 20 (level,
low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:06.1 to 64
input: ImExPS/2 Generic Explorer Mouse as /class/input/input5
pnp: the driver 'parport_pc' has been registered
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
parport_pc 00:09: driver attached
Adding 4008176k swap on /dev/sdb1. Priority:-1 extents:1 across:4008176k
Adding 4008176k swap on /dev/sdc1. Priority:-2 extents:1 across:4008176k
ReiserFS: md_d126: switching to journaled data mode
loop: module loaded
ReiserFS: md_d125: found reiserfs format "3.6" with standard journal
ReiserFS: md_d125: using ordered data mode
ReiserFS: md_d125: journal params: device md_d125, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
ReiserFS: md_d125: checking transaction log (md_d125)
ReiserFS: md_d125: Using r5 hash to sort names
ReiserFS: md_d127p1: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p1: using journaled data mode
ReiserFS: md_d127p1: journal params: device md_d127p1, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p1: checking transaction log (md_d127p1)
ReiserFS: md_d127p1: Using r5 hash to sort names
ReiserFS: md_d127p2: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p2: using journaled data mode
ReiserFS: md_d127p2: journal params: device md_d127p2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p2: checking transaction log (md_d127p2)
ReiserFS: md_d127p2: Using r5 hash to sort names
ReiserFS: md_d127p3: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p3: using journaled data mode
ReiserFS: md_d127p3: journal params: device md_d127p3, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p3: checking transaction log (md_d127p3)
ReiserFS: md_d127p3: Using r5 hash to sort names
ReiserFS: md_d127p5: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p5: using journaled data mode
ReiserFS: md_d127p5: journal params: device md_d127p5, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p5: checking transaction log (md_d127p5)
ReiserFS: md_d127p5: Using r5 hash to sort names
ReiserFS: md_d127p6: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p6: using journaled data mode
ReiserFS: md_d127p6: journal params: device md_d127p6, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p6: checking transaction log (md_d127p6)
ReiserFS: md_d127p6: Using r5 hash to sort names
ReiserFS: md_d127p7: found reiserfs format "3.6" with standard journal
ReiserFS: md_d127p7: using journaled data mode
ReiserFS: md_d127p7: journal params: device md_d127p7, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit
age 30, max trans age 30
ReiserFS: md_d127p7: checking transaction log (md_d127p7)
ReiserFS: md_d127p7: Using r5 hash to sort names
SGI XFS with ACLs, security attributes, realtime, large block/inode
numbers, no debug enabled
SGI XFS Quota Management subsystem
Filesystem "md_d127p8": Disabling barriers, not supported by the
underlying device
XFS mounting filesystem md_d127p8
Ending clean XFS mount for filesystem: md_d127p8
eth2: no link during initialization.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth2: link is not ready
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
processors (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0xa
powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xc
powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xe
powernow-k8: 3 : fid 0xe (2200 MHz), vid 0x10
powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
eth1: no IPv6 routers present
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
Clocksource tsc unstable (delta = -224373898 ns)
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [APC6] -> GSI 16 (level,
low) -> IRQ 16
PCI: Setting latency timer of device 0000:03:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.09 Fri Jan 11
14:04:37 PST 2008
** Loaded modules:
Module Size Used by
nvidia 8851908 24
binfmt_misc 17292 1
rfcomm 46240 2
l2cap 29568 9 rfcomm
bluetooth 65540 4 rfcomm,l2cap
nfsd 261416 13
lockd 73136 2 nfsd
nfs_acl 8192 1 nfsd
auth_rpcgss 53152 1 nfsd
sunrpc 201096 9 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 9472 1 nfsd
ac 11400 0
battery 19976 0
powernow_k8 18464 1
cpufreq_powersave 6272 0
cpufreq_stats 10528 0
cpufreq_userspace 9604 0
cpufreq_ondemand 13712 1
cpufreq_conservative 13320 0
freq_table 9728 3 powernow_k8,cpufreq_stats,cpufreq_ondemand
ipv6 286248 28
xfs 495720 1
firewire_sbp2 20624 0
loop 22788 0
snd_hda_intel 362024 1
snd_pcm_oss 46624 0
snd_mixer_oss 21376 1 snd_pcm_oss
snd_pcm 89352 2 snd_hda_intel,snd_pcm_oss
parport_pc 42408 0
parport 44812 1 parport_pc
pcspkr 7808 0
snd_timer 28552 1 snd_pcm
psmouse 45724 0
serio_raw 11908 0
k8temp 10496 0
snd 65896 7
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 13216 1 snd
snd_page_alloc 15248 2 snd_hda_intel,snd_pcm
button 13984 0
i2c_nforce2 11136 0
i2c_core 29824 2 nvidia,i2c_nforce2
evdev 17024 3
reiserfs 224640 8
dm_mirror 27008 0
dm_snapshot 21960 0
dm_mod 67832 2 dm_mirror,dm_snapshot
raid456 128544 1
async_xor 7424 1 raid456
async_memcpy 6528 1 raid456
async_tx 7168 1 raid456
xor 10128 2 raid456,async_xor
raid1 27648 2
md_mod 84380 12 raid456,raid1
ide_cd 44704 0
cdrom 39464 1 ide_cd
sd_mod 33408 18
jmicron 7168 0 [permanent]
generic 9732 0 [permanent]
amd74xx 14360 0 [permanent]
ide_core 144920 4 ide_cd,jmicron,generic,amd74xx
floppy 66664 0
forcedeth 54540 0
ahci 34436 0
firewire_ohci 24192 0
firewire_core 49472 2 firewire_sbp2,firewire_ohci
sata_nv 33032 14
crc_itu_t 6656 1 firewire_core
ata_generic 13060 0
ehci_hcd 39692 0
libata 162736 3 ahci,sata_nv,ata_generic
scsi_mod 170296 3 firewire_sbp2,sd_mod,libata
ohci_hcd 28164 0
thermal 22688 0
processor 45032 2 powernow_k8,thermal
fan 9864 0
** PCI devices:
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller
[10de:0369] (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge
[10de:0360] (rev a3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036c] (rev a1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller
[10de:036d] (rev a2) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e]
(rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: <access denied>
Kernel driver in use: AMD_IDE
Kernel modules: ata_generic, amd74xx, generic
00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, generic
00:05.1 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, generic
00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller
[10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 23
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at bc00 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: sata_nv
Kernel modules: sata_nv, ata_generic, generic
00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge
[10de:0370] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: <access denied>
00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition
Audio [10de:0371] (rev a2)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373]
(rev a3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1277
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=8]
Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373]
(rev a3)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 1276
Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ac00 [size=8]
Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0375] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge
[10de:0377] (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A
IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. K8N4-E Mainboard [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fdde0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron
20360/20363 AHCI Controller [197b:2363] (rev 03) (prog-if 85 [Master
SecO PriO])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:81e4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8c00 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: ata_generic, generic, jmicron
03:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce
8500 GT [10de:0421] (rev a1) (prog-if 00 [VGA controller])
Subsystem: eVga.com. Corp. Unknown device [3842:c749]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 7c00 [size=128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.24-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.19 Debian configuration
management sy
ii initramfs-tools [linux-initr 0.91e tools for generating an
initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux
kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-25 Yet Another mkInitRD
linux-image-2.6.24-1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.24-1-amd64/preinst/abort-overwrite-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-dir-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/failed-to-move-modules-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/bootloader-test-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/create-kimage-link-2.6.24-1-amd64:
true
linux-image-2.6.24-1-amd64/postinst/depmod-error-initrd-2.6.24-1-amd64:
false
linux-image-2.6.24-1-amd64/preinst/overwriting-modules-2.6.24-1-amd64:
true
linux-image-2.6.24-1-amd64/postinst/bootloader-error-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/postinst/old-initrd-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-amd64/preinst/bootloader-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/initrd-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/removing-running-kernel-2.6.24-1-amd64:
true
linux-image-2.6.24-1-amd64/postinst/depmod-error-2.6.24-1-amd64: false
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-amd64/preinst/lilo-initrd-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/postinst/old-system-map-link-2.6.24-1-amd64: true
linux-image-2.6.24-1-amd64/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-amd64/preinst/abort-install-2.6.24-1-amd64:
linux-image-2.6.24-1-amd64/prerm/would-invalidate-boot-loader-2.6.24-1-amd64:
true
linux-image-2.6.24-1-amd64/preinst/elilo-initrd-2.6.24-1-amd64: true
--
Moshe Yudkowsky * moshe@pobox.com * www.pobox.com/~moshe
"You can lead a yak to water, but you can't teach an old dog
to make a silk purse out of a sow's ear."
-- Opus
--- End Message ---