[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#384098: marked as done (linux-image-2.6.17-2-686: tg3 wake on lan does not work)

Your message dated Wed, 25 Apr 2007 21:25:20 +0000
with message-id <BAY103-F9238E93B13710050DD7EAD9490@phx.gbl>
and subject line linux-image-2.6.17-2-686: tg3 wake on lan does not work
has caused the attached Bug report to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere.  Please contact me immediately.)

Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message --- 
Package: linux-image-2.6.17-2-686
Version: 2.6.17-6
Severity: normal

Wake on lan doesn't work with the tg3 driver. WOL was enabled with the ethtool,
and confirmed as on with the same tool. After shutdown the computer cannot be
woken (works fine when bcm5700 driver is used instead).

This is not a recent regression, this has never worked in any version I've tried
previously.

Richard.

02:01.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet [14e4:1653]
        Subsystem: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet [14e4:1653]
        Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 201
        Memory at f3020000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [48] Power Management version 2
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-

root@richard:~# ethtool eth0
Settings for eth0:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: g
        Current message level: 0x000000ff (255)
        Link detected: yes


-- System Information:
Debian Release: testing/unstable
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-686
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)

Versions of packages linux-image-2.6.17-2-686 depends on:
ii  module-init-tools             3.2.2-3    tools for managing Linux kernel mo
ii  yaird [linux-initramfs-tool]  0.0.12-17  Yet Another mkInitRD

Versions of packages linux-image-2.6.17-2-686 recommends:
ii  libc6-i686                   2.3.6.ds1-2 GNU C Library: Shared libraries [i

-- debconf information excluded

--- End Message ---
--- Begin Message --- Network card turned out to have no embedded firmware. Although the driver should have loaded the firmware at runtime few people are likely to be in this situation. Nothing is going to be done to fix this, and if it were I would be unable to test it now I've flashed the card. 

Closing bug to keep things tidy.

_________________________________________________________________
MSN Hotmail is evolving - check out the new Windows Live Hotmail http://get.live.com/betas/mail_betas

--- End Message ---
Reply to: