Bug#421019: linux-image-2.6.20-1-686: USB scanner works with 2.6.18-4 but fails with 2.6.20-1
Package: linux-image-2.6.20-1-686
Version: 2.6.20-2
Severity: normal
My Canon USB scanner has been working fine for ages but does not work
with linux-image-2.6.20-1-686. xsane detects the scanner and when asked
to scan thinks that the scanner is working however the scanner does not
react and xsane retrieves a black image. I have checked using 2.6.18-4-686
that the scanner is working correctly.
lsusb says that my scanner is a:
04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
I am using xsane 0.99+0.991-2, xsane-common 0.99+0.991-2, libsane
1.0.18-6
My scanner is connected to a USB2 PCI card via a USB1.1 powered hub.
-- Package-specific info:
** Version: Linux version 2.6.20-1-686 (Debian 2.6.20-2) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Sun Apr 15 21:03:57 UTC 2007
** Not tainted
** Kernel log:
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: not running at top speed; connect to a high speed hub
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
hda: SAMSUNG SV0432A, ATA DISK drive
usb 5-2: new full speed USB device using uhci_hcd and address 3
usb 5-2: configuration #1 chosen from 1 choice
hdb: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 8421840 sectors (4311 MB) w/482KiB Cache, CHS=8912/15/63, UDMA(33)
hda: hda1 hda2 hda3
Probing IDE interface ide1...
usb 5-1.2: new low speed USB device using uhci_hcd and address 4
usb 5-1.2: configuration #1 chosen from 1 choice
input: USB Keyboard USB Keyboard as /class/input/input1
hdc: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
hdd: SAMSUNG CD-R/RW SW-216B Q001 20010913, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
eth1: RealTek RTL-8029 found at 0xec00, IRQ 11, 00:40:05:E2:EA:E9.
hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache, DMA
drivers/usb/input/hid-core.c: usb_submit_urb(ctrl) failed
drivers/usb/input/hid-core.c: timeout initializing reports
input: USB Keyboard USB Keyboard as /class/input/input2
input: USB HID v1.10 Device [USB Keyboard USB Keyboard] on usb-0000:00:07.2-1.2
usb 5-1.4: new low speed USB device using uhci_hcd and address 5
usb 5-1.4: configuration #1 chosen from 1 choice
input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input3
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:07.2-1.4
usbcore: registered new interface driver snd-usb-audio
usbcore: registered new interface driver hci_usb
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
spurious 8259A interrupt: IRQ7.
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
Adding 385520k swap on /dev/hde1. Priority:10 extents:1 across:385520k
Adding 3387384k swap on /dev/mapper/vg0-swap1. Priority:10 extents:1 across:3387384k
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3071 buckets, 24568 max)
eth0: DSPCFG accepted after 0 usec.
eth0: link up.
eth0: Setting full-duplex based on negotiated link capability.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[drm] Initialized radeon 1.25.0 20060524 on minor 0
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
eth0: no IPv6 routers present
eth1: no IPv6 routers present
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
** Loaded modules:
Module Size Used by
rfcomm 35512 3
radeon 111072 2
drm 73972 3 radeon
l2cap 22208 5 rfcomm
ipv6 234016 24
ipt_MASQUERADE 3744 1
ipt_LOG 6304 1
xt_length 2048 5
ipt_REJECT 4544 1
xt_tcpudp 3232 7
xt_state 2560 2
iptable_nat 7332 1
nf_nat 17804 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 17772 4 iptable_nat
nf_conntrack 58440 5 ipt_MASQUERADE,xt_state,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink 6648 3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_filter 3072 1
ip_tables 12324 2 iptable_nat,iptable_filter
x_tables 14628 8 ipt_MASQUERADE,ipt_LOG,xt_length,ipt_REJECT,xt_tcpudp,xt_state,iptable_nat,ip_tables
dm_snapshot 16580 0
dm_mirror 20340 0
dm_mod 52812 12 dm_snapshot,dm_mirror
tsdev 7552 0
ide_cd 36672 0
cdrom 32960 1 ide_cd
ata_generic 7876 0
ata_piix 15044 0
generic 4932 0 [permanent]
hci_usb 16348 2
bluetooth 48580 7 rfcomm,l2cap,hci_usb
snd_usb_audio 73344 0
snd_mixer_oss 15488 0
snd_pcm 72036 1 snd_usb_audio
snd_page_alloc 9736 1 snd_pcm
snd_usb_lib 15104 1 snd_usb_audio
snd_seq_dummy 3876 0
snd_seq_oss 29440 0
snd_seq_midi 8320 0
ne2k_pci 10720 0
8390 9888 1 ne2k_pci
piix 9540 0 [permanent]
i2c_piix4 8620 0
uhci_hcd 22160 0
snd_seq_midi_event 7008 2 snd_seq_oss,snd_seq_midi
floppy 54468 0
snd_seq 46320 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 20964 2 snd_pcm,snd_seq
i2c_core 20736 1 i2c_piix4
natsemi 26208 0
pcspkr 3264 0
rtc 12976 0
intel_agp 22748 1
agpgart 30504 2 drm,intel_agp
shpchp 31156 0
pci_hotplug 29312 1 shpchp
snd_rawmidi 22592 2 snd_usb_lib,snd_seq_midi
snd_seq_device 7756 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
snd_hwdep 8740 1 snd_usb_audio
snd 48196 9 snd_usb_audio,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
soundcore 7616 1 snd
reiserfs 220352 4
ide_disk 15744 6
pata_pdc2027x 10692 0
libata 100052 3 ata_generic,ata_piix,pata_pdc2027x
scsi_mod 133100 1 libata
pdc202xx_new 8352 0 [permanent]
ide_core 114728 5 ide_cd,generic,piix,ide_disk,pdc202xx_new
evdev 9376 0
usbhid 23136 0
hid 22784 1 usbhid
usbkbd 6752 0
ohci_hcd 19076 0
ehci_hcd 29132 0
usbcore 122312 9 hci_usb,snd_usb_audio,snd_usb_lib,uhci_hcd,usbhid,usbkbd,ohci_hcd,ehci_hcd
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: e4000000-e5ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at d000 [size=32]
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]
Subsystem: Netgear FA311 / FA312 (FA311 with WoL HW) [1385:f311]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2750ns min, 13000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at e7004000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: <access denied>
00:0b.0 Mass storage controller [0180]: Promise Technology, Inc. PDC20268 (Ultra100 TX2) [105a:4d68] (rev 02) (prog-if 85)
Subsystem: Promise Technology, Inc. Ultra100TX2 [105a:4d68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at e7000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 20010000 [size=16K]
Capabilities: <access denied>
00:0d.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller [10b9:5237]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at e7005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:0d.1 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller [10b9:5237]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at e7006000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:0d.2 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237] (rev 03) (prog-if 10 [OHCI])
Subsystem: ALi Corporation USB 1.1 Controller [10b9:5237]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 12
Region 0: Memory at e7007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
00:0d.3 USB Controller [0c03]: ALi Corporation USB 2.0 Controller [10b9:5239] (rev 01) (prog-if 20 [EHCI])
Subsystem: ALi Corporation USB 2.0 Controller [10b9:5239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e7008000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
00:11.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS) [10ec:8029]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at ec00 [size=32]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV280 [Radeon 9200 PRO] [1002:5960] (rev 01) (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd Unknown device [148c:2094]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 12
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at e5000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e4000000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Display controller [0380]: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) [1002:5940] (rev 01)
Subsystem: C.P. Technology Co. Ltd Unknown device [148c:2095]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at e5010000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (990, 'unstable'), (500, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.20-1-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.20-1-686 depends on:
ii module-init-tools 3.3-pre4-2 tools for managing Linux kernel mo
ii yaird [linux-initramfs-tool] 0.0.12-20 Yet Another mkInitRD
Versions of packages linux-image-2.6.20-1-686 recommends:
ii libc6-i686 2.5-2 GNU C Library: Shared libraries [i
-- debconf information:
linux-image-2.6.20-1-686/postinst/depmod-error-initrd-2.6.20-1-686: false
linux-image-2.6.20-1-686/postinst/old-initrd-link-2.6.20-1-686: true
linux-image-2.6.20-1-686/preinst/already-running-this-2.6.20-1-686:
linux-image-2.6.20-1-686/preinst/failed-to-move-modules-2.6.20-1-686:
linux-image-2.6.20-1-686/postinst/create-kimage-link-2.6.20-1-686: true
linux-image-2.6.20-1-686/prerm/removing-running-kernel-2.6.20-1-686: true
linux-image-2.6.20-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.20-1-686/postinst/bootloader-test-error-2.6.20-1-686:
linux-image-2.6.20-1-686/preinst/initrd-2.6.20-1-686:
linux-image-2.6.20-1-686/preinst/lilo-initrd-2.6.20-1-686: true
linux-image-2.6.20-1-686/postinst/old-system-map-link-2.6.20-1-686: true
linux-image-2.6.20-1-686/prerm/would-invalidate-boot-loader-2.6.20-1-686: true
linux-image-2.6.20-1-686/preinst/abort-install-2.6.20-1-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.20-1-686/preinst/overwriting-modules-2.6.20-1-686: true
linux-image-2.6.20-1-686/preinst/abort-overwrite-2.6.20-1-686:
linux-image-2.6.20-1-686/preinst/bootloader-initrd-2.6.20-1-686: true
linux-image-2.6.20-1-686/postinst/bootloader-error-2.6.20-1-686:
linux-image-2.6.20-1-686/preinst/elilo-initrd-2.6.20-1-686: true
linux-image-2.6.20-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.20-1-686/postinst/depmod-error-2.6.20-1-686: false
linux-image-2.6.20-1-686/postinst/old-dir-initrd-link-2.6.20-1-686: true
Reply to: