Bug#289770: kernel-image-2.6.10-1-686: 2.6.10 fails to set up DMA on my IBM thinkpad
On Wed, Jan 12, 2005 at 01:00:05PM +0100, maximilian attems wrote:
> On Tue, 11 Jan 2005, Philip Armstrong wrote:
> > Linux version 2.6.10-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5 (Debian 1:3.3.5-5)) #1 Sun Jan 9 01:40:18 EST 2005
> ..
> > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> > PIIX4: IDE controller at PCI slot 0000:00:07.1
> > PCI: Unable to reserve I/O region #5:10@fcf0 for device 0000:00:07.1
> that smells bad
> > Probing IDE interface ide0...
> > hda: IBM-DADA-26480, ATA DISK drive
> > hdb: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive
> > Probing IDE interface ide1...
> > ide1: Wait for ready failed before probe !
> > Probing IDE interface ide2...
> > ide2: Wait for ready failed before probe !
> > Probing IDE interface ide3...
> > ide3: Wait for ready failed before probe !
> > Probing IDE interface ide4...
> > ide4: Wait for ready failed before probe !
> > Probing IDE interface ide5...
> > ide5: Wait for ready failed before probe !
> > elevator: using anticipatory as default io scheduler
> > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> > hda: max request size: 128KiB
> > hda: 12594960 sectors (6448 MB) w/460KiB Cache, CHS=13328/15/63
> > hda: cache flushes not supported
> > /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >
>
> 2.6.9 is borked for piix, but 2.6.10 works for other,
> aboves doesn't look like ide breakage,
> but could be related to acpi.
>
> can you try to boot 2.6.10 appended with "pci=noacpi"
> and post that dmesg.
ACPI is disabled anyway -- the BIOS on this laptop is pre 1999.
I'll try explicitly disabling it though.
Phil
--
http://www.kantaka.co.uk/ .oOo. public key: http://www.kantaka.co.uk/gpg.txt
Reply to: