Bug#289770: kernel-image-2.6.10-1-686: 2.6.10 fails to set up DMA on my IBM thinkpad

[maximilian attems <debian@sternwelten.at>]

On Tue, 11 Jan 2005, Philip Armstrong wrote:

> Linux version 2.6.10-1-686 (dilinger@toaster.hq.voxel.net) (gcc version 3.3.5 (Debian 1:3.3.5-5)) #1 Sun Jan 9 01:40:18 EST 2005
..
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller at PCI slot 0000:00:07.1
> PCI: Unable to reserve I/O region #5:10@fcf0 for device 0000:00:07.1
that smells bad
> Probing IDE interface ide0...
> hda: IBM-DADA-26480, ATA DISK drive
> hdb: MATSHITADVD-ROM SR-8171, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide1...
> ide1: Wait for ready failed before probe !
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> elevator: using anticipatory as default io scheduler
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: max request size: 128KiB
> hda: 12594960 sectors (6448 MB) w/460KiB Cache, CHS=13328/15/63
> hda: cache flushes not supported
>  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 >

2.6.9 is borked for piix, but 2.6.10 works for other,
aboves doesn't look like ide breakage,
but could be related to acpi.

can you try to boot 2.6.10 appended with "pci=noacpi"
and post that dmesg.
thanks maks