Re: xserver e Radeon
Ciao,
ho estratto alcune righe di rilevanza dal log di X ed anche i pacchetti
installati (vedi sotto).
a) firmware-amd-graphics l'ho rimosso per evitare la situation schermo
nero. (avrei potuto passare il parametro NOMODESET a grub all'avvio
piuttosto che rimovere questo pacchetto ma questo non avrebbe risolto il
problem)
b) il driver radeon viene caricato e poi rimosso per qualche motivo ...
VESA prende il sopravento
c) DRM non carica ... immagino a cause di VESA che non supporta il DRM?
Antonio
$ dpkg --get-selections |grep firmware
bluez-firmware install
firmware-linux-free install
firmware-misc-nonfree install
$ dpkg --get-selections |grep xserver-xorg-video
xserver-xorg-video-all install
xserver-xorg-video-amdgpu install
xserver-xorg-video-ati install
xserver-xorg-video-fbdev install
xserver-xorg-video-nouveau install
xserver-xorg-video-qxl install
xserver-xorg-video-r128 install
xserver-xorg-video-radeon install
xserver-xorg-video-vesa install
xserver-xorg-video-vmware install
$ sudo cat /var/log/Xorg.0.log |grep EE
[sudo] password di antonio:
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 33.805] (EE) open /dev/dri/card0: No such file or directory
[ 33.805] (EE) open /dev/dri/card0: No such file or directory
[ 33.823] (EE) open /dev/fb0: No such file or directory
[ 33.823] (EE) open /dev/fb0: No such file or directory
[ 33.823] (EE) Screen 0 deleted because of no matching config section.
[ 33.823] (EE) Screen 0 deleted because of no matching config section.
[ 33.823] (EE) Screen 0 deleted because of no matching config section.
[ 34.198] (EE) AIGLX: reverting to software rendering
$ sudo cat /var/log/Xorg.0.log |grep radeon
[ 33.699] (II) LoadModule: "radeon"
[ 33.699] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 33.759] (II) Module radeon: vendor="X.Org Foundation"
[ 33.823] (II) UnloadModule: "radeon"
$ sudo cat /var/log/Xorg.0.log |grep drm
[ 33.805] (II) [KMS] drm report modesetting isn't supported.
$ sudo cat /var/log/Xorg.0.log |grep VESA
[ 33.785] (II) VESA: driver for VESA chipsets: vesa
[ 33.874] (II) VESA(0): initializing int10
[ 33.875] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 33.875] (II) VESA(0): VESA BIOS detected
[ 33.875] (II) VESA(0): VESA VBE Version 3.0
[ 33.875] (II) VESA(0): VESA VBE Total Mem: 16384 kB
[ 33.875] (II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
[ 33.875] (II) VESA(0): VESA VBE OEM Software Rev: 10.80
[ 33.875] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 33.875] (II) VESA(0): VESA VBE OEM Product: M82
[ 33.875] (II) VESA(0): VESA VBE OEM Product Rev: 01.00
[ 33.892] (II) VESA(0): Creating default Display subsection in Screen
section
[ 33.892] (==) VESA(0): Depth 24, (--) framebuffer bpp 32
[ 33.892] (==) VESA(0): RGB weight 888
[ 33.892] (==) VESA(0): Default visual is TrueColor
[ 33.892] (==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 33.892] (II) VESA(0): VESA VBE DDC supported
[ 33.892] (II) VESA(0): VESA VBE DDC Level 2
[ 33.892] (II) VESA(0): VESA VBE DDC transfer in appr. 1 sec.
[ 33.943] (II) VESA(0): VESA VBE DDC read successfully
[ 33.943] (II) VESA(0): Manufacturer: LPL Model: b900 Serial#: 0
[ 33.943] (II) VESA(0): Year: 2006 Week: 0
[ 33.943] (II) VESA(0): EDID Version: 1.2
[ 33.943] (II) VESA(0): Digital Display Input
[ 33.943] (II) VESA(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 33.943] (II) VESA(0): Gamma: 2.20
[ 33.943] (II) VESA(0): No DPMS capabilities specified
[ 33.943] (II) VESA(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 33.943] (II) VESA(0): First detailed timing is preferred
mode
[ 33.943] (II) VESA(0): redX: 0.590 redY: 0.344 greenX: 0.323
greenY: 0.534
[ 33.943] (II) VESA(0): blueX: 0.156 blueY: 0.138 whiteX: 0.312
whiteY: 0.328
[ 33.943] (II) VESA(0): Manufacturer's mask:
0
[ 33.943] (II) VESA(0): Supported detailed
timing:
[ 33.943] (II) VESA(0): clock: 71.2 MHz Image Size: 289 x 210
mm
[ 33.943] (II) VESA(0): h_active: 1280 h_sync: 1328 h_sync_end 1360
h_blank_end 1440 h_border: 0
[ 33.943] (II) VESA(0): v_active: 800 v_sync: 802 v_sync_end 808
v_blanking: 823 v_border: 0
[ 33.943] (II) VESA(0): LGPhilipsLCD
[ 33.943] (II) VESA(0): LP154W01-TLAJ
[ 33.943] (II) VESA(0): EDID (in hex):
[ 33.943] (II) VESA(0): 00ffffffffffff00320c00b900000000
[ 33.943] (II) VESA(0): 00100102802115780a0f109758528828
[ 33.943] (II) VESA(0): 23505400000001010101010101010101
[ 33.943] (II) VESA(0): 010101010101d51b00a0502017303020
[ 33.943] (II) VESA(0): 26002115100000190000000000000000
[ 33.943] (II) VESA(0): 00000000000000000000000000fe004c
[ 33.943] (II) VESA(0): 475068696c6970734c43440a000000fe
[ 33.943] (II) VESA(0): 004c503135345730312d544c414a0036
[ 33.943] (II) VESA(0): EDID vendor "LPL", prod id 47360
[ 33.943] (II) VESA(0): EDID quirk: Detailed timings give
vertical size in cm.
[ 33.943] (II) VESA(0): Printing DDC gathered Modelines:
[ 33.943] (II) VESA(0): Modeline "1280x800"x0.0 71.25 1280 1328
1360 1440 800 802 808 823 -hsync -vsync (49.5 kHz eP)
[ 33.943] (II) VESA(0): Searching for matching VESA mode(s):
[ 33.977] (II) VESA(0): Total Memory: 256 64KB banks (16384kB)
[ 33.977] (II) VESA(0): <default monitor>: Using hsync value of 49.48 kHz
[ 33.977] (II) VESA(0): <default monitor>: Using vrefresh value of
60.12 Hz
[ 33.977] (WW) VESA(0): Unable to estimate virtual size
[ 33.977] (II) VESA(0): Not using built-in mode "1024x768" (no mode
of this name)
[ 33.977] (II) VESA(0): Not using built-in mode "800x600" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "640x480" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "720x400" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "640x400" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "640x400" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "640x350" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "512x384" (no mode of
this name)
[ 33.977] (II) VESA(0): Not using built-in mode "320x240" (no mode of
this name)
[ 33.978] (II) VESA(0): Not using built-in mode "320x200" (no mode of
this name)
[ 33.978] (WW) VESA(0): No valid modes left. Trying less strict filter...
[ 33.978] (II) VESA(0): <default monitor>: Using hsync value of 49.48 kHz
[ 33.978] (II) VESA(0): <default monitor>: Using vrefresh value of
60.12 Hz
[ 33.978] (WW) VESA(0): Unable to estimate virtual size
[ 33.978] (II) VESA(0): Not using built-in mode "1024x768" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "800x600" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x480" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "720x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x350" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "512x384" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "320x240" (illegal
horizontal timings)
[ 33.978] (II) VESA(0): Not using built-in mode "320x200" (illegal
horizontal timings)
[ 33.978] (WW) VESA(0): No valid modes left. Trying aggressive sync
range...
[ 33.978] (II) VESA(0): <default monitor>: Using hsync range of
31.50-49.48 kHz
[ 33.978] (II) VESA(0): <default monitor>: Using vrefresh range of
50.00-60.12 Hz
[ 33.978] (WW) VESA(0): Unable to estimate virtual size
[ 33.978] (II) VESA(0): Not using built-in mode "640x480" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "720x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x400" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "640x350" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "512x384" (hsync out
of range)
[ 33.978] (II) VESA(0): Not using built-in mode "320x240" (illegal
horizontal timings)
[ 33.978] (II) VESA(0): Not using built-in mode "320x200" (illegal
horizontal timings)
[ 33.978] (--) VESA(0): Virtual size is 1024x768 (pitch 1024)
[ 33.978] (**) VESA(0): *Built-in mode "1024x768"
[ 33.978] (**) VESA(0): *Built-in mode "800x600"
[ 33.978] (**) VESA(0): Display dimensions: (330, 210) mm
[ 33.978] (**) VESA(0): DPI set to (78, 92)
[ 33.978] (II) VESA(0): Attempting to use 60Hz refresh for mode
"1024x768" (123)
[ 33.978] (II) VESA(0): Attempting to use 60Hz refresh for mode
"800x600" (122)
[ 33.978] (**) VESA(0): Using "Shadow Framebuffer"
[ 34.033] (II) VESA(0): initializing int10
[ 34.033] (II) VESA(0): Primary V_BIOS segment is: 0xc000
[ 34.033] (II) VESA(0): VESA BIOS detected
[ 34.033] (II) VESA(0): VESA VBE Version 3.0
[ 34.033] (II) VESA(0): VESA VBE Total Mem: 16384 kB
[ 34.033] (II) VESA(0): VESA VBE OEM: ATI ATOMBIOS
[ 34.033] (II) VESA(0): VESA VBE OEM Software Rev: 10.80
[ 34.033] (II) VESA(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI
Technologies Inc.
[ 34.033] (II) VESA(0): VESA VBE OEM Product: M82
[ 34.033] (II) VESA(0): VESA VBE OEM Product Rev: 01.00
[ 34.033] (II) VESA(0): virtual address = 0x7fb9be305000,
[ 34.043] (II) VESA(0): Setting up VESA Mode 0x123 (1024x768)
[ 34.043] (II) VESA(0): VBESetVBEMode failed, mode set without
customized refresh.
[ 34.161] (==) VESA(0): Default visual is TrueColor
[ 34.191] (==) VESA(0): Backing store enabled
[ 34.192] (==) VESA(0): DPMS enabled
---
Respect your privacy and that of others, don't give your data to big corporations.
Use alternatives like Signal (https://whispersystems.org/) for your messaging or
Diaspora* (https://joindiaspora.com/) for your social networking.
Il 30/12/2017 09:05, liste DOT girarsi AT posteo DOT eu ha scritto:
> Il 30/12/2017 01:48, Antonio ha scritto:
>> Salve,
>>
>> ho una vecchia Radeon Mobility 3540 sul mio Toshiba Satelite A300. Avevo
>> Ubuntu 12 installato e andava a meraviglia in termini di video. Adesso
>> ho installato Debian Stretch e non c'e verso di fargli usare il driver
>> radeon. Xserver carica sempre il driver vesa.
>>
>
> Oltre ai firmware-nonfree, risulta installato il pacchetto
> xorg-xserver-video-radeon?
>
> libdrm-radeon è installato?
>
> se dai:
>
> cat /var/log/Xorg.0.log | grep EE
>
> ti dice qualcosa?
>
>
> Kernel in uso?
>
Reply to: