Re: problema connesione dischi
il disco sdb sembra ok (sostituito qualche mese fa) mentre il disco sda
mi riporta qualche errore ma non riesco a capire se sono errori vecchi o
recenti.
allego i log di smartctl
Il 21/01/2014 18:04, dr_mortimer@cryptolab.net ha scritto:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tue, 21 Jan 2014, Nicola Scattolin wrote:
ciao a tutti,
nei log del server ho trovato qualche volta questo
[...]
devo preoccuparmi? cosa può essere e come lo risolvo?
certo non è un buon segno, cercando un po' online vedrai che errori
del genere di solito indicano gravi problemi del disco. come prima
cosa sicuramente proverei a fare un test con smartctl [0]
se il disco passa il test senza errori (cosa che dubito) si potrebbe
prendere in esame un problema al cavo.
saluti.
[0] http://packages.debian.org/wheezy/smartmontools
- --
.''`. | ~<[ alessio ~ (dr_mortimer) ]>~
: :' : |
`. `'` | Get Debian: http://www.debian.org/distrib/
`- | The Onion Router: https://torproject.org/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
Comment: Topal (http://freshmeat.net/projects/topal)
iQEcBAEBAgAGBQJS3qikAAoJECuQEX1h/eHQhKsH/jpS2Q9OoppqOeF1AFIr0geS
Mc1xb3BVFPcWmVbPLuYwaBjpKm+xyfLoM+9Orp0R63qTz8iKxY1pg/omRJQRsvo+
NvkZiSJImbkS5E6/9phzh6yoht/NwyLVhsQLfUt48wtOfwUWLKo1rqEPL+ras8qC
1W8xx5nCPGiW3faTuPR/vUOHl7ayFu1qZedFt6//+HpL0yHk9evVs4ArY/nMLCub
RVDvYWrjCyAnywzqejhhuqHNhPPlqVTLjKDihn1V8C9n7MZCS8njLmj/EB9l8E/k
K5axuxtZB+FXF2jp1KXUUP/Ibt8SwvXQX+REAzOQKjt2JDCXac7IX7sjW7KE8KQ=
=Bzbq
-----END PGP SIGNATURE-----
--
Nicola
Ser.Tec s.r.l.
Via E. Salgari 14/E
31056 Roncade, Treviso
http://dpidgprinting.com
http://twitter.com/sertecsrl
http://www.facebook.com/sertecsrl
http://www.youtube.com/sertectube
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST3000DM001-9YN166
Serial Number: S1F0326E
Firmware Version: CC4C
User Capacity: 3,000,592,982,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jan 22 09:16:07 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 575) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 097 006 Pre-fail Always - 132217864
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10
5 Reallocated_Sector_Ct 0x0033 097 097 036 Pre-fail Always - 4640
7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 4924406400
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 16654
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 10
183 Runtime_Bad_Block 0x0032 097 097 000 Old_age Always - 3
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 204
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 17180131335
189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
190 Airflow_Temperature_Cel 0x0022 056 046 045 Old_age Always - 44 (Lifetime Min/Max 43/52)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 7
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 12638
194 Temperature_Celsius 0x0022 044 054 000 Old_age Always - 44 (0 21 0 0)
197 Current_Pending_Sector 0x0012 100 054 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0010 100 054 000 Old_age Offline - 8
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 3
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 218227288326056
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 275551897189785
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 219913018854747
SMART Error Log Version: 1
ATA Error Count: 199 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 199 occurred at disk power-on lifetime: 16630 hours (692 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 34d+14:01:57.433 READ FPDMA QUEUED
60 00 f8 ff ff ff 4f 00 34d+14:01:57.432 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 34d+14:01:57.432 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 34d+14:01:57.432 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 34d+14:01:57.431 IDENTIFY DEVICE
Error 198 occurred at disk power-on lifetime: 16630 hours (692 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 f8 ff ff ff 4f 00 34d+14:01:54.565 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 34d+14:01:54.565 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:54.565 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 34d+14:01:54.564 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 34d+14:01:54.564 READ NATIVE MAX ADDRESS EXT
Error 197 occurred at disk power-on lifetime: 16630 hours (692 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 08 ff ff ff 4f 00 34d+14:01:51.954 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:51.608 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:51.607 READ FPDMA QUEUED
ea 00 00 00 00 00 a0 00 34d+14:01:51.552 FLUSH CACHE EXT
61 00 08 ff ff ff 4f 00 34d+14:01:51.552 WRITE FPDMA QUEUED
Error 196 occurred at disk power-on lifetime: 16630 hours (692 days + 22 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 34d+14:01:37.855 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:37.854 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:37.853 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 34d+14:01:37.852 READ FPDMA QUEUED
60 00 08 ff ff ff 4f 00 34d+14:01:37.703 READ FPDMA QUEUED
Error 195 occurred at disk power-on lifetime: 15975 hours (665 days + 15 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 75 8d 02
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 80 80 74 8d 42 00 7d+06:39:33.861 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 7d+06:39:33.860 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 e0 00 7d+06:39:33.860 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 00 7d+06:39:33.860 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 7d+06:39:33.860 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4647 -
# 2 Extended offline Completed without error 00% 3607 -
# 3 Extended offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST3000DM001-9YN166
Serial Number: Z1F0VZSX
Firmware Version: CC4H
User Capacity: 3,000,592,982,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Jan 22 09:16:14 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 584) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 255) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3085) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 105 099 006 Pre-fail Always - 9959672
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 21
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 055 041 030 Pre-fail Always - 2422546004581
9 Power_On_Hours 0x0032 093 093 000 Old_age Always - 6848
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 21
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always - 4295032833
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 052 045 Old_age Always - 43 (Lifetime Min/Max 30/48)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 18
193 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 7601
194 Temperature_Celsius 0x0022 043 048 000 Old_age Always - 43 (0 25 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 212347478088109
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 228971210941795
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 222295455517387
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 4767 -
# 2 Extended offline Completed without error 00% 1104 -
# 3 Extended offline Completed without error 00% 500 -
# 4 Extended offline Completed without error 00% 5 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Reply to: