Ciao a tutta la lista. Ho reinstallato la Lenny circa 3 settimane fa,sul mio laptop.Tra le tante cose da configurare,ho sempre installato la webcam integrata seguendo questa guida:http://paper0k.wordpress.com/2006/12/18/orbicam-finalmente-supportata/ Ora dopo aver effettuato la procedura ho notato che la webcam non funziona più a dovere ad esempio lanciando camorama l'applicazione dopo poco si blocca e non vedo assolutamente nulla il dmesg è il seguente:
mentre lasciando camorama spento,il led della webcam mi lampeggia sempre e dando sempre dmesg da shell ottengo questo:[ 1114.388611] gspca: data format set to RGB[ 1114.388611] usb 3-2: New USB device found, idVendor=046d, idProduct=0892 [ 1114.388611] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 1114.388611] usb 3-2: Product: Camera [ 1114.388611] usb 3-2: Manufacturer: OEM[ 1114.400541] gspca: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters. [ 1114.400541] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x82 AlternateSet 3 [ 1117.201853] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=83.54.148.250 DST=192.168.1.2 LEN=83 TOS=0x00 PREC=0x00 TTL=244 ID=29785 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=83.54.148.250 LEN=55 TOS=0x00 PREC=0x00 TTL=41 ID=0 DF PROTO=UDP SPT=4672 DPT=10010 LEN=35 ] [ 1117.209508] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=83.54.148.250 DST=192.168.1.2 LEN=84 TOS=0x00 PREC=0x00 TTL=244 ID=29786 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=83.54.148.250 LEN=56 TOS=0x00 PREC=0x00 TTL=41 ID=0 DF PROTO=UDP SPT=4672 DPT=10010 LEN=36 ] [ 1117.563572] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=201.250.255.128 DST=192.168.1.2 LEN=56 TOS=0x00 PREC=0x00 TTL=240 ID=57246 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=201.250.255.128 LEN=55 TOS=0x00 PREC=0x00 TTL=41 ID=0 DF PROTO=UDP SPT=4672 DPT=26459 LEN=35 ] [ 1117.563572] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=201.250.255.128 DST=192.168.1.2 LEN=56 TOS=0x00 PREC=0x00 TTL=240 ID=57247 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=201.250.255.128 LEN=56 TOS=0x00 PREC=0x00 TTL=41 ID=0 DF PROTO=UDP SPT=4672 DPT=26459 LEN=36 ] [ 1163.345274] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=83.63.228.235 DST=192.168.1.2 LEN=84 TOS=0x00 PREC=0x00 TTL=242 ID=19028 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=83.63.228.235 LEN=56 TOS=0x00 PREC=0x00 TTL=46 ID=0 DF PROTO=UDP SPT=4672 DPT=42527 LEN=36 ] [ 1178.889061] gspca: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters. [ 1178.889061] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x82 AlternateSet 3 [ 1185.625816] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=190.176.11.72 DST=192.168.1.2 LEN=91 TOS=0x00 PREC=0x00 TTL=113 ID=52786 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=190.176.11.72 LEN=63 TOS=0x00 PREC=0x00 TTL=39 ID=0 DF PROTO=UDP SPT=4672 DPT=53663 LEN=43 ] [ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [6] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [7] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [8] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [9] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [10] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [11] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [12] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [13] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [14] len=0, status=-84[ 1191.579415][ 1191.579415] gspca: [spca50x_move_data:1611] ISOC data error: [15] len=0, status=-84 [ 1191.579415]
vedo che ci sono errori ma non saprei dove mettere le mani per mettere a posto la situazione,quindi attendo consigli e suggerimenti[ 1646.364780] usb 5-6: USB disconnect, address 122[ 1646.642086] usb 5-6: new high speed USB device using ehci_hcd and address 123[ 1646.777025] usb 5-6: device descriptor read/all, error -71 [ 1646.842578] hub 5-0:1.0: unable to enumerate USB device on port 6[ 1647.237716] usb 3-2: new full speed USB device using uhci_hcd and address 49 [ 1647.382896] usb 3-2: not running at top speed; connect to a high speed hub[ 1647.417874] usb 3-2: configuration #1 chosen from 1 choice [ 1647.419815] gspca: USB GSPCA camera found.(VC0321) [ 1647.419828] gspca: [spca5xx_probe:4275] Camera type YUYV [ 1647.636131] gspca: [vc032x_probe_sensor:140] check sensor header 44[ 1647.649321] gspca: [vc032x_read_sensor_register:123] Read Sensor h (0x00) m (0x30) l (0x31) [ 1647.665848] gspca: [vc032x_read_sensor_register:123] Read Sensor h (0x00) m (0x30) l (0x31) [ 1647.680915] gspca: [vc032x_read_sensor_register:123] Read Sensor h (0x00) m (0x30) l (0x31)[ 1647.681556] gspca: [vc0321_config:371] Find Sensor PO3130NC[ 1647.689554] gspca: [spca5xx_getcapability:1249] maxw 640 maxh 480 minw 176 minh 144[ 1647.689611] gspca: data format set to RGB[ 1647.689753] usb 3-2: New USB device found, idVendor=046d, idProduct=0892 [ 1647.689761] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0[ 1647.689767] usb 3-2: Product: Camera [ 1647.689772] usb 3-2: Manufacturer: OEM[ 1647.704201] gspca: [spca5xx_set_light_freq:1932] Sensor currently not support light frequency banding filters. [ 1647.704227] gspca: [gspca_set_isoc_ep:945] ISO EndPoint found 0x82 AlternateSet 3 [ 1654.958296] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=80.31.159.30 DST=192.168.1.2 LEN=138 TOS=0x00 PREC=0x00 TTL=243 ID=46563 PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=80.31.159.30 LEN=110 TOS=0x00 PREC=0x00 TTL=42 ID=0 DF PROTO=UDP SPT=4672 DPT=26885 LEN=90 ] [ 1669.064227] Inbound IN=eth0 OUT= MAC=00:16:36:5d:1b:30:00:0f:3d:96:55:7a:08:00 SRC=189.133.33.65 DST=192.168.1.2 LEN=105 TOS=0x00 PREC=0x00 TTL=235 ID=28261 DF PROTO=ICMP TYPE=3 CODE=3 [SRC=192.168.1.2 DST=189.133.33.65 LEN=77 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=UDP SPT=4672 DPT=61117 LEN=57 ]
Grazie a tutti -- -= Nic =- Amico di Emergency_2008 Linux registered user # 380338 Linux registered machine # 283289 Msn:nicbrigante@gmail.com Skype:nicbrigante