kernel 2.6.22-2.686 su Lenny continui blocchi di sistema :-(
Un Domenicale saluto a tutti :-)
Ho finito ora di configurare
> Wireless Modem HUAWEI ETS2551
il quale mi permettera' di navigare su internet ed aggiornare la mia
Lenny ad un costo _ragionevole_ rispetto al "gprs/edge" del mio
telefonino (via bluetooth) che ho usato fin'ora :-)
Ah! uso un portatile Toshiba tecra A4 che ha compiuto i due anni il mese
scorso :)
Il problema che vi sottopongo riguarda i continui blocchi di sistema da
quando ho installato e, naturalmente quando lo uso, il kernel 2.6.22
sulla mia Lenny.
Io ho gia' il mal di testa a forza di guardare log.
Vi posto l'ultimo "dmesg" dove il boot ha superato il login, la musica
di "benvenuto" e poi... "tutti fermi" :-(
Se volete vi posto anche altri dove ha superato il login e ha fatto una
sessione intera ma mi sembra gia... lunga questa lettera :-)
Ah! come potrete vedere, ci sono dei parametri al boot. "irqpool" e'
necessario per "ordinare" l'irq11 un po' affollato :-) il
"pci=assign-busses" l'ho messo perche' nel "dmesg" c'era questo
> PCI: Bus #07 (-#0a) is hidden behind transparent bridge #06 (-#06)
> (try 'pci=assign-busses')
Questo mi appare anche quando uso il 2.6.21 e mai mi ha dato problemi.
Ora, perche' l'ho visto ho messo la direttiva anche al boot del kernel
2.6.21. A dirvi il vero, non ho visto differenze salvo che e' scomparsa
la riga qui sopra. Boh! :-)
Beh! eccovi l'ultimo "dmesg" e grazie per l'aiuto che mi darete per
capire cosa ha il mio nuovo kernel :-)
> Linux version 2.6.22-2-686 (Debian 2.6.22-4) (waldi@debian.org) (gcc
> version 4.1.3 20070812 (prerelease) (Debian 4.1.2-15)) #1 SMP Fri Aug
> 31 00:24:01 UTC 2007
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffdfffc (usable)
> BIOS-e820: 000000001ffdfffc - 000000001fffffc0 (ACPI data)
> BIOS-e820: 000000001fffffc0 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> Entering add_active_range(0, 0, 131039) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 131039
> HighMem 131039 -> 131039
> early_node_map[1] active PFN ranges
> 0: 0 -> 131039
> On node 0 totalpages: 131039
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 991 pages used for memmap
> Normal zone: 125952 pages, LIFO batch:31
> HighMem zone: 0 pages used for memmap
> DMI 2.3 present.
> ACPI: RSDP 000E5010, 0014 (r0 TOSINV)
> ACPI: RSDT 1FFF89F7, 0034 (r1 INSYDE RSDT_000 100 ABCD 10200)
> ACPI: FACP 1FFFFB30, 0074 (r1 TOSINV FACP_000 100 0000 10200)
> ACPI: DSDT 1FFF9040, 6AE5 (r1 TOSINV SONOMA 1004 INTL 2002036)
> ACPI: FACS 1FFFFFC0, 0040
> ACPI: MCFG 1FFFFBC0, 003C (r1 INSYDE MCFG_000 30303030 0000 30303030)
> ACPI: SSDT 1FFF8BE5, 0279 (r1 PmRef Cpu0Ist 3000 INTL 20030522)
> ACPI: SSDT 1FFF8A2B, 01BA (r1 PmRef Cpu0Cst 3001 INTL 20030522)
> ACPI: PM-Timer IO Port: 0x1008
> Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
> Built 1 zonelists. Total pages: 130016
> Kernel command line: root=/dev/sda3 ro irqpoll pci=assign-busses
> Misrouted IRQ fixup and polling support enabled
> This may significantly impact system performance
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> mapped APIC to ffffd000 (0140c000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> Detected 1862.050 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Memory: 510728k/524156k available (1688k kernel code, 12812k reserved,
> 653k data, 244k init, 0k highmem)
> virtual kernel memory layout:
> fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
> lowmem : 0xc0000000 - 0xdffdf000 ( 511 MB)
> .init : 0xc034f000 - 0xc038c000 ( 244 kB)
> .data : 0xc02a62bf - 0xc03497e4 ( 653 kB)
> .text : 0xc0100000 - 0xc02a62bf (1688 kB)
> Checking if this processor honours the WP bit even in supervisor
> mode... Ok.
> Calibrating delay using timer specific routine.. 3736.96 BogoMIPS
> (lpj=7473932)
> Security Framework v1.0.0 initialized
> SELinux: Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: afe9f9ff 00000000 00000000 00000000
> 00000180 00000000 00000000
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 2048K
> CPU: After all inits, caps: afe9f9ff 00000000 00000000 00002040
> 00000180 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> Freeing SMP alternatives: 11k freed
> ACPI: Core revision 20070126
> ACPI: setting ELCR to 0200 (from 0c20)
> CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> Brought up 1 CPUs
> Booting paravirtualized kernel on bare hardware
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
> PCI: Not using MMCONFIG.
> PCI: PCI BIOS revision 2.10 entry at 0xea8f4, last bus=6
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
> PCI quirk: region 1300-133f claimed by ICH6 GPIO
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *11)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 5 *11)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
> ACPI: PCI Interrupt Link [LNKE] (IRQs *5 11)
> ACPI: PCI Interrupt Link [LNKF] (IRQs 5 10) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 6) *11
> ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10) *11
> ACPI: Power Resource [PUT2] (on)
> ACPI: Power Resource [PFA1] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> 00:0b: SMCf010 not responding at SIR 0x2f8, FIR 0x110;
> auto-configuring
> pnp: Device 00:0b disabled.
> pnp: Device 00:0b activated.
> 00:0b: responds at SIR 0x2f8, FIR 0x110
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post
> a report
> PCI: Cannot allocate resource region 0 of device 0000:04:06.0
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> ACPI: RTC can wake from S4
> pnp: 00:01: iomem range 0xe0000000-0xefffffff has been reserved
> pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
> pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
> pnp: 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
> pnp: 00:05: iomem range 0xe0000000-0xefffffff has been reserved
> pnp: 00:05: iomem range 0xf0008000-0xf000bfff has been reserved
> pnp: 00:05: iomem range 0xfed14000-0xfed17fff has been reserved
> pnp: 00:05: iomem range 0xfed18000-0xfed18fff has been reserved
> Time: tsc clocksource has been installed.
> PCI: Bridge: 0000:00:01.0
> IO window: c000-dfff
> MEM window: c0000000-cfffffff
> PREFETCH window: 90000000-9fffffff
> PCI: Bridge: 0000:00:1c.0
> IO window: a000-bfff
> MEM window: bc000000-bfffffff
> PREFETCH window: 8c000000-8fffffff
> PCI: Bridge: 0000:00:1c.1
> IO window: 8000-9fff
> MEM window: b8000000-bbffffff
> PREFETCH window: 88000000-8bffffff
> PCI: Bus 5, cardbus bridge: 0000:04:06.0
> IO window: 00006000-000060ff
> IO window: 00006400-000064ff
> PREFETCH window: 80000000-83ffffff
> MEM window: b4000000-b7ffffff
> PCI: Bridge: 0000:00:1e.0
> IO window: 6000-7fff
> MEM window: b0000000-b7ffffff
> PREFETCH window: 80000000-87ffffff
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 10 (level,
> low) -> IRQ 10
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> PCI: Setting latency timer of device 0000:00:1e.0 to 64
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:04:06.0[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 196608 bytes)
> TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> checking if image is initramfs... it is
> Switched to high resolution mode on CPU 0
> Freeing initrd memory: 5328k freed
> audit: initializing netlink socket (disabled)
> audit(1193333715.676:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> Boot video device is 0000:01:00.0
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:01.0:pcie00]
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.0:pcie00]
> Allocate Port Service[0000:00:1c.0:pcie02]
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:1c.1:pcie00]
> Allocate Port Service[0000:00:1c.1:pcie02]
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
> enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level,
> low) -> IRQ 5
> ACPI: PCI interrupt for device 0000:00:1e.3 disabled
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> Freeing unused kernel memory: 244k freed
> input: AT Translated Set 2 keyboard as /class/input/input0
> ACPI: Transitioning device [FAN1] to D3
> ACPI: Transitioning device [FAN1] to D3
> ACPI: Fan [FAN1] (off)
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device
> is not present [20070126]
> Marking TSC unstable due to: possible TSC halt in C2.
> Time: acpi_pm clocksource has been installed.
> ACPI: Thermal Zone [TZCR] (62 C)
> ACPI: Thermal Zone [TZVR] (52 C)
> ACPI: Thermal Zone [TZVL] (53 C)
> ACPI: Thermal Zone [TZCL] (46 C)
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 10 (level,
> low) -> IRQ 10
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001220
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001240
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> Clocksource tsc unstable (delta = -170637400 ns)
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001260
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 1-1: new low speed USB device using uhci_hcd and address 2
> PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 10 (level,
> low) -> IRQ 10
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
> ehci_hcd 0000:00:1d.7: debug port 1
> PCI: cache line size of 32 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: irq 10, io mem 0xf4000000
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 8 ports detected
> ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 6
> PCI: setting IRQ 6 as level-triggered
> ACPI: PCI Interrupt 0000:04:06.2[C] -> Link [LNKG] -> GSI 6 (level,
> low) -> IRQ 6
> firewire_ohci: Added fw-ohci device 0000:04:06.2, OHCI version 1.10
> SCSI subsystem initialized
> libata version 2.21 loaded.
> ata_piix 0000:00:1f.2: version 2.11
> ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKD] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100
> irq 14
> ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108
> irq 15
> usb 1-1: device not accepting address 2, error -71
> ata1.00: ATA-6: FUJITSU MHV2080AH, 00400097, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA
> ata1.00: applying bridge limits
> ata1.00: configured for UDMA/100
> firewire_core: created new fw device fw0 (0 config rom retries)
> ata2.00: ATAPI: MATSHITADVD-RAM UJ-831S, 1.40, max UDMA/33
> ata2.00: configured for UDMA/33
> scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2080A 0040 PQ: 0
> ANSI: 5
> scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-831S 1.40 PQ: 0
> ANSI: 5
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 < sda5<6>usb 1-1: new low speed USB device using
> uhci_hcd and address 4
> sda6 sda7 sda8 sda9 > sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> usb 1-1: configuration #1 chosen from 1 choice
> usb 2-2: new full speed USB device using uhci_hcd and address 2
> usb 2-2: configuration #1 chosen from 1 choice
> usbcore: registered new interface driver hiddev
> input: Logitech Optical USB Mouse as /class/input/input1
> input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on
> usb-0000:00:1d.0-1
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> Attempting manual resume
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> Linux agpgart interface v0.102 (c) Dave Jones
> ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> sky2 0000:02:00.0: v1.14 addr 0xbc000000 irq 11 Yukon-EC (0xb6) rev 1
> sky2 0000:02:00.0: No interrupt generated using MSI, switching to INTx
> mode.
> sky2 eth0: addr 00:a0:d1:22:1d:56
> intel_rng: FWH not detected
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
> iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> Yenta: CardBus bridge found at 0000:04:06.0 [1179:ff10]
> Yenta: Enabling burst memory read transactions
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:04:06.0, mfunc 0x01aa1b22, devctl 0x66
> Bluetooth: Core ver 2.11
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Yenta: ISA IRQ mask 0x0098, PCI irq 11
> Socket status: 30000006
> pcmcia: parent PCI bridge I/O window: 0x6000 - 0x7fff
> cs: IO port probe 0x6000-0x7fff: clean.
> pcmcia: parent PCI bridge Memory window: 0xb0000000 - 0xb7ffffff
> pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
> ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKE] -> GSI 5 (level,
> low) -> IRQ 5
> PCI: Setting latency timer of device 0000:00:1e.3 to 64
> Bluetooth: HCI USB driver ver 2.9
> Real Time Clock Driver v1.12ac
> sdhci: Secure Digital Host Controller Interface driver
> sdhci: Copyright(c) Pierre Ossman
> sdhci: SDHCI controller found at 0000:04:06.4 [104c:8034] (rev 0)
> ACPI: PCI Interrupt 0000:04:06.4[A] -> Link [LNKC] -> GSI 11 (level,
> low) -> IRQ 11
> mmc0: SDHCI at 0xb000a000 irq 11 DMA
> mmc1: SDHCI at 0xb000a100 irq 11 DMA
> mmc2: SDHCI at 0xb000a200 irq 11 DMA
> ieee80211_crypt: registered algorithm 'NULL'
> ieee80211: 802.11 data/management/control stack, git-1.1.13
> ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketreno@linux.intel.com>
> usbcore: registered new interface driver hci_usb
> ACPI: PCI Interrupt 0000:04:06.3[D] -> Link [LNKE] -> GSI 5 (level,
> low) -> IRQ 5
> ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKB] -> GSI 10 (level,
> low) -> IRQ 10
> PCI: Setting latency timer of device 0000:00:1e.2 to 64
> ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmq
> ipw2200: Copyright(c) 2003-2006 Intel Corporation
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps:
> 0xa04713/0x0
> irda_init()
> NET: Registered protocol family 23
> input: SynPS/2 Synaptics TouchPad as /class/input/input2
> parport_pc 00:09: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> cs: IO port probe 0x100-0x3af: excluding 0x110-0x117 0x300-0x307
> 0x310-0x31f
> cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0xc00-0xcf7: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> intel8x0_measure_ac97_clock: measured 55475 usecs
> intel8x0: clocking to 48000
> ACPI: PCI Interrupt 0000:04:04.0[A] -> Link [LNKA] -> GSI 11 (level,
> low) -> IRQ 11
> ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
> ipw2200: Detected geography ZZM (11 802.11bg channels, 0 802.11a
> channels)
> udev: renamed network interface eth1 to eth2
> Adding 867468k swap on /dev/sda8. Priority:-1 extents:1
> across:867468k
> EXT3 FS on sda3, internal journal
> loop: module loaded
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
> dm-devel@redhat.com
> fuse init (API version 7.8)
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda9, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> NTFS driver 2.1.28 [Flags: R/W MODULE].
> NTFS volume version 3.1.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is
> recommended
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is
> recommended
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover.
> pcmcia: This interface will soon be removed from the kernel; please
> expect breakage unless you upgrade to new tools.
> pcmcia: see
> http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for
> details.
Ciao Genki ):o))
Reply to: