Re: atheros-madwifi su debian etch/lenny

["Brunetto Marco Ziosi" <brunettolist@gmail.com>]

si, questo è quello che sono riuscito a fare (riesco anche a vedere le reti con kwifi per esempio, ma non a connettermi!):

snoopy:/home/brunetto# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

eth1      no wireless extensions.

wifi0     no wireless extensions.

ath0      IEEE 802.11g  ESSID:"WirelessZG"
          Mode:Managed  Frequency:2.412 GHz  Access Point: 00:14:6C:62:D7:7E
          Bit Rate:36 Mb/s   Tx-Power:16 dBm   Sensitivity=0/3
          Retry:off   RTS thr:off   Fragment thr:off
          Encryption key:3541-4339-4332-4235-3333   Security mode:restricted
          Power Management:off
          Link Quality=25/94  Signal level=-63 dBm  Noise level=-88 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

sit0      no wireless extensions.

snoopy:/home/brunetto# iwlist scan
lo        Interface doesn't support scanning.

eth0      Interface doesn't support scanning.

eth1      Interface doesn't support scanning.

wifi0     Interface doesn't support scanning.

ath0      Scan completed :
          Cell 01 - Address: 00:14:C1:1C:5E:31
                    ESSID:"USR9111"
                    Mode:Master
                    Frequency:2.462 GHz (Channel 11)
                    Quality=3/94  Signal level=-92 dBm  Noise level=-95 dBm
                    Encryption key:off
                    Bit Rates:1 Mb/s; 2 Mb/s; 
5.5 Mb/s; 11 Mb/s; 22 Mb/s
                              6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s
                              36 Mb/s; 48 Mb/s; 54 Mb/s
                    Extra:bcn_int=100
                    Extra:wme_ie=dd070050f202000100
          Cell 02 - Address: 00:14:6C:62:D7:7E
                    ESSID:"WirelessZG"
                    Mode:Master
                    Frequency:2.412 GHz (Channel 1)
                    Quality=14/94  Signal level=-81 dBm  Noise level=-95 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              12 Mb/s; 24 Mb/s; 36 Mb/s; 9 Mb/s; 18 Mb/s
                              48 Mb/s; 54 Mb/s
                    Extra:bcn_int=100

sit0      Interface doesn't support scanning.


snoopy:/home/brunetto# dhclient ath0
Internet Systems Consortium DHCP Client V3.0.4
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/

wifi0: unknown hardware address type 801
wifi0: unknown hardware address type 801
Listening on LPF/ath0/00:11:f5:a5:6c:86
Sending on   LPF/ath0/00:11:f5:a5:6c:86
Sending on   Socket/fallback
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 3
DHCPDISCOVER on ath0 to 
255.255.255.255 port 67 interval 3
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 10
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on ath0 to 255.255.255.255 port 67 interval 16
DHCPDISCOVER on ath0 to 
255.255.255.255 port 67 interval 4
No DHCPOFFERS received.
No working leases in persistent database - sleeping.

Il 25/05/07, automatic_jack <automatic_jack@katamail.com> ha scritto:

On Fri, 25 May 2007 18:58:28 +0200
"Brunetto Marco Ziosi" <brunettolist@gmail.com> wrote:

> Scusate...

ath0 è settato come "managed"?

Da "iwconfig" vedi l' associazione con l' ap (via mac address)?