Debian Sarge e lo speedtouch 330
Ciao a tutti.
Vorrei risolevere un problema con il mio modem Speedtouch 330, non ho
trovato niente sull'archivio della mailing-list, percui vi espongo il
mio cruccio.
L'installazione ed il set-up sono andati a buon fine ma al comando
speedtouch-start lo script si ferma al caricamento del modulo EHCI.
Qualcuno è in grado di aiutarmi a risolvere questo problema?
Ecco l'errore:
zampo1:/# speedtouch-start
Starting ADSL connection...
Loading EHCI support... KO
Ecco il risultato di lsmod (ho volutamente tolto qualche cosa per non
appesantire la lettura, ma se serve posto tutto)
Module Size Used by
appletalk 36340 20
speedtch 15152 0
usblp 13056 0
usb_storage 68800 1
pci_hotplug 34352 0
via_agp 9088 1
agpgart 34536 2 via_agp
ehci_hcd 31364 0
eth1394 21768 0
uhci_hcd 32784 0
usbcore 118308 7 speedtch,usblp,usb_storage,ehci_hcd,uhci_hcd
via_rhine 21640 0
mii 5184 1 via_rhine
via_ircc 26448 0
irda 195712 1 via_ircc
crc_ccitt 2176 1 irda
ohci1394 35588 0
scsi_mod 124812 5 usb_storage,sr_mod,sbp2,sd_mod,libata
unix 28660 401
mi hanno anche consigliato di esporvi lspci -v
zampo1:/# lspci -v
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266]
Host Bridge
Subsystem: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266
AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00009000-00009fff
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d0000000-dfffffff
Capabilities: [80] Power Management version 2
0000:00:08.0 Multimedia audio controller: Creative Labs: Unknown device 0008
Subsystem: Creative Labs: Unknown device 1001
Flags: bus master, medium devsel, latency 32, IRQ 169
I/O ports at a000 [size=64]
Capabilities: [dc] Power Management version 2
0000:00:09.0 Communication controller: Lucent Microelectronics V.92 56K
WinModem (rev 02)
Subsystem: Lucent Microelectronics: Unknown device 044c
Flags: bus master, medium devsel, latency 32, IRQ 177
Memory at ea000000 (32-bit, non-prefetchable) [size=256]
I/O ports at a400 [size=8]
I/O ports at a800 [size=256]
Capabilities: [f8] Power Management version 2
0000:00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46) (prog-if 10 [OHCI])
Subsystem: Unknown device e217:0140
Flags: bus master, medium devsel, latency 32, IRQ 185
Memory at ea001000 (32-bit, non-prefetchable) [size=2K]
I/O ports at ac00 [size=128]
Capabilities: [50] Power Management version 2
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 193
I/O ports at b000 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 193
I/O ports at b400 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB
1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Flags: bus master, medium devsel, latency 32, IRQ 193
I/O ports at b800 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
(prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 193
Memory at ea002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
Subsystem: Biostar Microtech Int'l Corp: Unknown device 3204
Flags: bus master, medium devsel, latency 32, IRQ 201
I/O ports at bc00 [size=16]
Capabilities: [c0] Power Management version 2
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Biostar Microtech Int'l Corp: Unknown device f614
Flags: medium devsel, IRQ 209
I/O ports at c000 [size=256]
Capabilities: [c0] Power Management version 2
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 74)
Subsystem: Biostar Microtech Int'l Corp: Unknown device 2200
Flags: bus master, medium devsel, latency 32, IRQ 217
I/O ports at c800 [size=256]
Memory at ea003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200
QM [Radeon 9100] (prog-if 00 [VGA])
Subsystem: PC Partner Limited: Unknown device 7149
Flags: bus master, stepping, 66MHz, medium devsel, latency 32,
IRQ 169
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 9000 [size=256]
Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [58] AGP version 2.0
Capabilities: [50] Power Management version 2
inoltre vi aggiungo anche parte del testo di /var/log/messages
Aug 2 15:18:05 zampo1 kernel: agpgart: Found an AGP 2.0 compliant
device at 0000:00:00.0.
Aug 2 15:18:05 zampo1 kernel: agpgart: Putting AGP V2 device at
0000:00:00.0 into 1x mode
Aug 2 15:18:05 zampo1 kernel: agpgart: Putting AGP V2 device at
0000:01:00.0 into 1x mode
Aug 2 15:18:05 zampo1 kernel: [drm] Loading R200 Microcode
Aug 2 15:18:20 zampo1 gconfd (root-4895): Inizializzazione (versione
2.8.1), pid 4895, utente 'root'
Aug 2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo
"xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una
fonte di configurazione in sola lettura in posizione 0
Aug 2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo
"xml:readwrite:/root/.gconf" è stato risolto ad una fonte di
configurazione scrivibile in posizione 1
Aug 2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo
"xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una
fonte di configurazione in sola lettura in posizione 2
Aug 2 15:18:22 zampo1 gconfd (root-4895): L'indirizzo
"xml:readwrite:/root/.gconf" è stato risolto ad una fonte di
configurazione scrivibile in posizione 0
Aug 2 15:24:13 zampo1 modem_run[5087]: modem_run version 1.3.1 started
by root uid 0
Attendo lumi e grazie a tutti
Daniele
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.9.9/62 - Release Date: 02/08/2005
Reply to: