Ho provato a configurare da
#xf86cfg
risultato mi dice di eseguire
#x -configure
che mi dà il messaggio allegato e alla fine mi dice
che non trova il modulo glide..
Ho una radeon 9200 se che ha già funzionata (almeno
con il modulo vesa) ma ora devo avere incasinato qualcosa :-(
Allego i messagi di errore (gli output dei
comandi).. rigrazio anticipatatmente chiunque gli dia un occhiata !
marco
|
This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.1.1 (Debian 4.2.1-15.backports.org.1 20040129172904 tretkowski@inittab.de) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 October 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.24-1-k7 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 29 16:50:40 2004 List of video drivers: atimisc r128 radeon fglrx mga glint nv tga s3 s3virge sis rendition neomagic i740 tdfx savage cirrus vmware tseng trident chips apm glide fbdev i128 ati i810 imstt newport ark cyrix siliconmotion vesa vga v4l Not loading .rodata.str1.32 (EE) module ABI minor version (6) is newer than the server's version (5) (EE) Failed to load module "fglrx" (module requirement mismatch, 0) (EE) Glide driver: Could not load the shared library file for Glide: "libglide2x.so"! You need to have Glide installed to run the glide driver for XFree86. Also, you need to tell XFree86 where the libglide2x.so file is placed by making a soft link in the /usr/X11R6/lib/modules directory that points to the libglide2x.so file. For example (if your libglide2x.so file is in /usr/lib): # ln -s /usr/lib/libglide2x.so /usr/X11R6/lib/modules (EE) Failed to load module "glide" (a required submodule could not be loaded, 2) Fatal server error: XFree86 has found a valid card configuration. Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward 'scanpci -v' output to XFree86 support team. When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to debian-x@lists.debian.org.
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1106 device 0x3189 VIA Device unknown CardVendor 0x1043 card 0x807f (Card unknown) STATUS 0x2230 COMMAND 0x0006 CLASS 0x06 0x00 0x00 REVISION 0x80 BASE0 0xf0000008 addr 0xf0000000 MEM PREFETCHABLE BYTE_0 0x80881900 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x0000 cardnum 0x01 function 0x00: vendor 0x1106 device 0xb198 VIA Device unknown STATUS 0x2230 COMMAND 0x0007 CLASS 0x06 0x04 0x00 REVISION 0x00 HEADER 0x01 LATENCY 0x00 PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00 IOBASE 0xd000 IOLIM 0xdfff SECSTATUS 0x0000 NOPREFETCH_MEMBASE 0xdf000000 MEMLIM 0xdfefffff PREFETCH_MEMBASE 0xdff00000 MEMLIM 0xefffffff NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN NO_ISA_EN NO_SERR_EN NO_PERR_EN pci bus 0x0000 cardnum 0x09 function 0x00: vendor 0x10b7 device 0x1700 3COM Device unknown CardVendor 0x1043 card 0x80eb (Card unknown) STATUS 0x02b0 COMMAND 0x0017 CLASS 0x02 0x00 0x00 REVISION 0x12 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08 BASE0 0xde800000 addr 0xde800000 MEM BASE1 0x0000b801 addr 0x0000b800 I/O MAX_LAT 0x1f MIN_GNT 0x17 INT_PIN 0x01 INT_LINE 0x0a BYTE_0 0x5b00000 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00 pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x1106 device 0x3149 VIA Device unknown CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0290 COMMAND 0x0007 CLASS 0x01 0x04 0x00 REVISION 0x80 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00 BASE0 0x0000b401 addr 0x0000b400 I/O BASE1 0x0000b001 addr 0x0000b000 I/O BASE2 0x0000a801 addr 0x0000a800 I/O BASE3 0x0000a401 addr 0x0000a400 I/O BASE4 0x0000a001 addr 0x0000a000 I/O BASE5 0x00009801 addr 0x00009800 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x05 BYTE_0 0x44f10313 BYTE_1 0x00 BYTE_2 0x8072570 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x0f function 0x01: vendor 0x1106 device 0x0571 VIA VT 82C586 MVP3 IDE Bridge CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0290 COMMAND 0x0007 CLASS 0x01 0x01 0x8a REVISION 0x06 BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00 BASE4 0x00009401 addr 0x00009400 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0xff BYTE_0 0x509c21b BYTE_1 0x00 BYTE_2 0x80728e8 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x1106 device 0x3038 VIA VT 82C586 MVP3 USB Controller CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0017 CLASS 0x0c 0x03 0x00 REVISION 0x81 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE4 0x00009001 addr 0x00009000 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x05 BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x8072c60 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x10 function 0x01: vendor 0x1106 device 0x3038 VIA VT 82C586 MVP3 USB Controller CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0017 CLASS 0x0c 0x03 0x00 REVISION 0x81 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE4 0x00008801 addr 0x00008800 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x05 BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x8072fd8 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x10 function 0x02: vendor 0x1106 device 0x3038 VIA VT 82C586 MVP3 USB Controller CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0017 CLASS 0x0c 0x03 0x00 REVISION 0x81 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE4 0x00008401 addr 0x00008400 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x09 BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x8073350 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x10 function 0x03: vendor 0x1106 device 0x3038 VIA VT 82C586 MVP3 USB Controller CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0017 CLASS 0x0c 0x03 0x00 REVISION 0x81 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE4 0x00008001 addr 0x00008000 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x09 BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x80736c8 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x10 function 0x04: vendor 0x1106 device 0x3104 VIA Device unknown CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0017 CLASS 0x0c 0x03 0x20 REVISION 0x86 BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08 BASE0 0xde000000 addr 0xde000000 MEM MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x0b BYTE_0 0x30200 BYTE_1 0x00 BYTE_2 0x8073a40 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1106 device 0x3227 VIA Device unknown CardVendor 0x1043 card 0x80ed (Card unknown) STATUS 0x0210 COMMAND 0x0087 CLASS 0x06 0x01 0x00 REVISION 0x00 BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00 BYTE_0 0xf80044 BYTE_1 0x00 BYTE_2 0x8073db8 BYTE_3 0xffffffff pci bus 0x0000 cardnum 0x11 function 0x05: vendor 0x1106 device 0x3059 VIA Device unknown CardVendor 0x1043 card 0x80b0 (Card unknown) STATUS 0x0210 COMMAND 0x0001 CLASS 0x04 0x01 0x00 REVISION 0x60 BASE0 0x0000e001 addr 0x0000e000 I/O MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x0b BYTE_0 0xcc01 BYTE_1 0x00 BYTE_2 0x8074130 BYTE_3 0xffffffff pci bus 0x0001 cardnum 0x00 function 0x00: vendor 0x1002 device 0x5964 ATI Device unknown CardVendor 0x148c card 0x2073 (Card unknown) STATUS 0x02b0 COMMAND 0x0027 CLASS 0x03 0x00 0x00 REVISION 0x01 BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x08 BASE0 0xe0000008 addr 0xe0000000 MEM PREFETCHABLE BASE1 0x0000d801 addr 0x0000d800 I/O BASE2 0xdf000000 addr 0xdf000000 MEM BASEROM 0xdffe0000 addr 0xdffe0000 not-decode-enabled MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
hostname: Unknown host xauth: (argv):1: bad display name "Drago.Roverandom:0" in "list" command xauth: (argv):1: bad display name "Drago.Roverandom:0" in "add" command X: warning; process set to priority -1 instead of requested priority 0 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to fixes@XFree86.Org. Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.2.1.1 (Debian 4.2.1-15.backports.org.1 20040129172904 tretkowski@inittab.de) / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 October 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.24-1-k7 i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sun Feb 29 14:29:39 2004 (==) Using config file: "/etc/X11/XF86Config-4" Not loading .rodata.str1.32 (EE) module ABI minor version (6) is newer than the server's version (5) (EE) Failed to load module "fglrx" (module requirement mismatch, 0) (EE) No drivers available. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to debian-x@lists.debian.org. XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0" after 0 requests (0 known processed) with 0 events remaining. xauth: (argv):1: bad display name "Drago.Roverandom:0" in "remove" command