Sorry...I need help!!! Connessione modem esterno isdn in redhat 9A
Scusate il disturbo...mi sapreste aiutare?
Questo è il procedimento che faccio e il relativo output:
1)LANCIO WVDIALCONF /ETC/WVDIAL.CONF :
Scanning your serial ports for a modem.
Port Scan<*1>: Scanning ttyS0 first, /dev/modem is a link to it.
ttyS0<*1>: ATQ0 V1 E1 -- OK
ttyS0<*1>: ATQ0 V1 E1 Z -- ERROR
ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyS0<*1>: Modem Identifier: ATI -- ISDN TA S/T-Interface Version: 2.00.9A
ttyS0<*1>: ATI5 -- ROPER FLYING ISDN;ROP2121
ttyS0<*1>: Speed 4800: AT -- OK
ttyS0<*1>: Speed 9600: AT -- OK
ttyS0<*1>: Speed 19200: AT -- OK
ttyS0<*1>: Speed 38400: AT -- OK
ttyS0<*1>: Speed 57600: AT -- OK
ttyS0<*1>: Speed 115200: AT -- OK
ttyS0<*1>: Max speed is 115200; that should be safe.
ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found a modem on /dev/ttyS0, using link /dev/modem in config.
Modem configuration written to /etc/wvdial.conf.
ttyS0<Info>: Speed 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
2)COMPILO WVDIAL.CONF :
[Modem0]
Modem = /dev/ttyS0
Baud = 115200
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
FlowControl = Nessuno
[Dialer Defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = (AVENDO SCRITTO RELATIVO NUMERO
Username = <Your Login Name> USER
Password = <Your Password> E PWD)
3)LANCIO WVDIAL :
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT0643400000
--> Waiting for carrier.
ATDT0643400000
CONNECT 64000/HDLC
--> Carrier detected. Waiting for prompt.
[7f][03]@![01]b [1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]c
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]d
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]e
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]f
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]g
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]h
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]i
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]j
[1e][03][05]B#[05][05][06][18]N
[11][11][04][05]t[13][0b][01]MI-MMPPP[7f][03]@![01]k
[1e][03][05]B#[05][05][06][18]N [11][11][04][05]t[13][0b][01]MI-MMPPP
--> Connected, but carrier signal lost! Retrying...
--> Sending: ATDT0643400000
--> Waiting for carrier.
NO CARRIER
ATDT0643400000
--> No Carrier! Trying again.
--> Sending: ATDT0643400000
--> Waiting for carrier.
ATDT0643400000
N.B.
AVVIENE LA STESSA COSA UTILIZZANDO KPPP E ANCHE CONFIGUARNDO IL DNS IN
/ETC/RESOLV.CONF O AGGIUNGENDO ALCUNI RECORD IN /ETC/PPP/OPTIONS
_________________________________________________________________
Nuovo MSN Messenger 6.1 con sfondi e giochi! http://messenger.msn.it/
Provalo subito!
Reply to: