[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: wireless dlink dwl 650



On Sun, Jul 13, 2003 at 11:06:52AM +0200, Alex De Maria wrote:
> Non ho esperienza diretta con questa scheda ma il chipset del quale è dotata
> (il prism2) funziona egregiamente con i driver wlan_ng.
> (io ho una netgear che monta lo stesso chipset ed anche a me i driver
> Orinoco non vanno benissimo)
> Occhio che la scheda in tuo possesso esiste in due versioni, la 650 e la
> 650+. la prima effettivamente monta il chip prism2, ma la versione "+" monta
> invece il chip TI-acx100 che non ha al momento un supporto stabile sotto Linux

ho  provato wlan-ng.  Sembra che  qualcosa vada,  però nel  frattempo ho
scoperto  che  le schede  sul  portatile  vanno  col modulo  orinoco  di
pcmcia-cs.  A questo  punto  mi  viene il  dubbio  che sia  l'adattatore
pci<->pcmcia che  dia problemi.... Il  pacchetto pcmcia-cs è  lo stesso,
sul fisso ho  il 2.4.21, sul portatile il 2.4.18.  Sul portatile va, sul
fisso dice che non inizalizza il firmware....

Al boot mi dice:

cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x207 0x330-0x337 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
cs: warning: no high memory space available!
cs: memory probe 0x0d0000-0x0dffff: clean.
init_module: prism2_cs.o: 0.2.0 Loaded
init_module: dev_info is: prism2_cs
prism2_cs: index 0x01: Vcc 3.3, irq 18, io 0x0100-0x013f

se poi guardo il kernel:

dirac:~# cat /proc/net/dev
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
    lo:    2812      40    0    0    0     0          0         0     2812      40    0    0    0
  0       0          0
  eth0: 1531850    1155    0    0    0     0          0         0    49792     275    0    0    0
  0       0          0
 wlan0:       0       0    0    0    0     0          0         0        0       0    0    0    0
  0       0          0
dirac:~#

quindi sembra che veda la scheda, però:

dirac:~# cat /proc/net/wireless
Inter-| sta-|   Quality        |   Discarded packets               | Missed
 face | tus | link level noise |  nwid  crypt   frag  retry   misc | beacon
dirac:~#


dirac:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

dirac:~# iwconfig wlan0
Warning : Device wlan0 has been compiled with version 15
of Wireless Extension, while we are using version 12.
Some things may be broken...

wlan0     IEEE 802.11-b  Mode:Auto  Access Point: 00:00:00:00:00:00
          Encryption key:off

dirac:~#

e qui iniziano a venirmi i dubbi, ma il dubbio sommo viene adesso:

dirac:~# ifconfig wlan0 10.0.0.1
SIOCSIFFLAGS: No such device
dirac:~#

Se provo a fare partire l'interfaccia:

dirac:~# /etc/pcmcia/network  start wlan0
Ignoring unknown interface wlan0=wlan0.
dirac:~#

Avete una qualche idea? 

-- 
Non c'è più forza nella normalità, c'è solo monotonia.

Attachment: pgp23mfcXA6XD.pgp
Description: PGP signature


Reply to: