Problemi con ext3
Ciao a tutti,
lo so forse e' un po OT, spero non me ne vogliate per questo ....
Ho messo una debian woody su una SUN Netra X1, tutto bene, unico grosso
problema e' dopo una decina di giorni che la macchina e' su ottengo
questo:
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
init_special_inode: bogus imode (0)
init_special_inode: bogus imode (0)
Ho cercato su google ma non ho risolto nulla, le sto provando tutte, ho
provato a cabiare i cavi ide, ho provato a far partire la macchina con
ide=nodma al boot, non ho usato nessun parametro per hdparm ....
Qualcuno ha qualche dritta da darmi?
Grazie,
Andrea
dmesg | grep hd
Kernel command line: root=/dev/hda2 ro ide=nodma
ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:pio,
hdb:pio
ide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio,
hdd:pio
hda: IBM-DPTA-372050, ATA DISK drive
hdc: ST320413A, ATA DISK drive
hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63
hdc: setmax LBA 39102337, native 39102336
hdc: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63
lspci
00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIe
00:03.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101
PMU
00:05.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10
MBit (rev 31)
00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
[Aladdin IV]
00:0a.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
00:0c.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10
MBit (rev 31)
00:0d.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c3)
hdparm -I /dev/hda
/dev/hda:
removable ATA device, with non-removable media
Model Number: BI-MPDAT3-2750 0
Serial Number: J YMMJBT3147
Firmware Revision: 7PO63AA0
Standards:
Supported: 9 10 11 12
Likely used: 12
Configuration:
Logical max current
cylinders 65343 0
heads 4096 0
sectors/track 16128 0
bytes/track: 0 (obsolete)
bytes/sector: 0 (obsolete)
LBA user addressable sectors = 1661100210
Capabilities:
IORDY(may be)(cannot be disabled)
Buffer size: 10503.5kB ECC bytes: 8704 Queue depth: 1
Standby timer values: spec'd by Vendor
r/w multiple sector transfer: Max = 128 Current = ?
DMA: not supported
PIO: pio0
Security:
not supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
hdparm -I /dev/hdc
/dev/hdc:
removable ATA device, with non-removable media
Model Number: TS234031 A
Serial Number: E51D4KZR
Firmware Revision: .345
Standards:
Supported: 9 10 11 12
Likely used: 12
Configuration:
Logical max current
cylinders 65343 0
heads 4096 0
sectors/track 16128 0
bytes/track: 0 (obsolete)
bytes/sector: 0 (obsolete)
LBA user addressable sectors = 1409450151
Capabilities:
IORDY(may be)(cannot be disabled)
Buffer size: 2.0kB Queue depth: 1
Standby timer values: spec'd by Vendor
r/w multiple sector transfer: Max = 128 Current = ?
DMA: not supported
PIO: pio0
Security:
Master password revision code = 65279
not supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
--
Andrea Dettori <ndr@vitaminic.net>
Reply to: