Re: Problemi con ext3
che versione del kernel?
la 2.4.20 ha dei problemi con ext3 (esiste una patch se vuoi
ricompilare).
Altrimenti puoi downgradare al 2.4.19 o al 2.4.21rc-qualchecosa
ciao,
MaX
Il ven, 2003-02-28 alle 17:16, Andrea Dettori ha scritto:
> Ciao a tutti,
>
> lo so forse e' un po OT, spero non me ne vogliate per questo ....
>
> Ho messo una debian woody su una SUN Netra X1, tutto bene, unico grosso
> problema e' dopo una decina di giorni che la macchina e' su ottengo
> questo:
>
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> init_special_inode: bogus imode (0)
> init_special_inode: bogus imode (0)
>
> Ho cercato su google ma non ho risolto nulla, le sto provando tutte, ho
> provato a cabiare i cavi ide, ho provato a far partire la macchina con
> ide=nodma al boot, non ho usato nessun parametro per hdparm ....
> Qualcuno ha qualche dritta da darmi?
> Grazie,
>
> Andrea
>
>
> dmesg | grep hd
> Kernel command line: root=/dev/hda2 ro ide=nodma
> ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:pio,
> hdb:pio
> ide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio,
> hdd:pio
> hda: IBM-DPTA-372050, ATA DISK drive
> hdc: ST320413A, ATA DISK drive
> hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=39770/16/63
> hdc: setmax LBA 39102337, native 39102336
> hdc: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=38792/16/63
>
>
> lspci
> 00:00.0 Host bridge: Sun Microsystems Computer Corp. Ultra IIe
> 00:03.0 Non-VGA unclassified device: Acer Laboratories Inc. [ALi] M7101
> PMU
> 00:05.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10
> MBit (rev 31)
> 00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA Bridge
> [Aladdin IV]
> 00:0a.0 USB Controller: Acer Laboratories Inc. [ALi] M5237 USB (rev 03)
> 00:0c.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10
> MBit (rev 31)
> 00:0d.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c3)
>
>
> hdparm -I /dev/hda
>
> /dev/hda:
>
> removable ATA device, with non-removable media
> Model Number: BI-MPDAT3-2750 0
> Serial Number: J YMMJBT3147
> Firmware Revision: 7PO63AA0
> Standards:
> Supported: 9 10 11 12
> Likely used: 12
> Configuration:
> Logical max current
> cylinders 65343 0
> heads 4096 0
> sectors/track 16128 0
> bytes/track: 0 (obsolete)
> bytes/sector: 0 (obsolete)
> LBA user addressable sectors = 1661100210
> Capabilities:
> IORDY(may be)(cannot be disabled)
> Buffer size: 10503.5kB ECC bytes: 8704 Queue depth: 1
> Standby timer values: spec'd by Vendor
> r/w multiple sector transfer: Max = 128 Current = ?
> DMA: not supported
> PIO: pio0
> Security:
> not supported
> not enabled
> not locked
> not frozen
> not expired: security count
> not supported: enhanced erase
>
> hdparm -I /dev/hdc
>
> /dev/hdc:
>
> removable ATA device, with non-removable media
> Model Number: TS234031 A
> Serial Number: E51D4KZR
> Firmware Revision: .345
> Standards:
> Supported: 9 10 11 12
> Likely used: 12
> Configuration:
> Logical max current
> cylinders 65343 0
> heads 4096 0
> sectors/track 16128 0
> bytes/track: 0 (obsolete)
> bytes/sector: 0 (obsolete)
> LBA user addressable sectors = 1409450151
> Capabilities:
> IORDY(may be)(cannot be disabled)
> Buffer size: 2.0kB Queue depth: 1
> Standby timer values: spec'd by Vendor
> r/w multiple sector transfer: Max = 128 Current = ?
> DMA: not supported
> PIO: pio0
> Security:
> Master password revision code = 65279
> not supported
> not enabled
> not locked
> not frozen
> not expired: security count
> not supported: enhanced erase
>
>
> --
> Andrea Dettori <ndr@vitaminic.net>
>
>
Reply to: