Come settare correttamente X ?
Sulla Debian 2.2, installata da CDROM di Inter.net n.61, ho provato a
settare X
sia con anXious (non ha la tastiera italiana e non accetta altre
tastiere) che
col vecchio xf86config.
Anche quest'ultimo non crea un XF86Config valido e non capisco perché:
poichè
con molte altre distro su questa stessa macchina non ho avuto problemi
(sia con xf86config che con XF86Setup).
Allego l'output che ottengo alla "caduta" del server: scusate la
lunghezza, ma
temerei di cassare proprio una parte significativa. Ho un monitor Sony
Multiscan17seII.
Qualcuno sa darmi un'imbeccata?
Grazie (da un eterno newbie che vorrebbe lanciarsi con Debian)
Samuel
===============================================================================
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.15pre20 i686 [ELF]
Configured drivers:
S3: accelerated server for S3 graphics adaptors (Patchlevel 0)
newmmio, mmio_928, s3_generic
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(it)" (overrides other XKB settings)
(**) Mouse: type: ps/2, device: /dev/mouse, buttons: 3
(**) S3: Graphics device ID: "My Video Card"
(**) S3: Monitor ID: "My Monitor"
(--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted.
(--) S3: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted.
(--) S3: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted.
(--) S3: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted.
(--) S3: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted.
Warning: The directory "/usr/lib/X11/fonts/cyrillic/" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/cyrillic/" does not exist.
Entry deleted from font path.
Warning: The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
Entry deleted from font path.
(**) FontPath set to
"/usr/lib/X11/fonts/misc/:unscaled,/usr/lib/X11/fonts/75dpi/
:unscaled,/usr/lib/X11/fonts/Type1/,/usr/lib/X11/fonts/Speedo/,/usr/lib/X11/fonts/misc/,
/usr/lib/X11/fonts/75dpi/"
(--) S3: PCI: Trio64V2 rev 16, Linear FB @ 0xe4000000
(--) S3: chipset: Trio64V2/DX rev. 16
(--) S3: chipset driver: newmmio
(--) S3: card type: PCI
(**) S3: videoram: 1024k
(--) S3: Ramdac type: s3_trio64v2
(--) S3: Ramdac speed: 170 MHz
(--) S3: Using Trio64V2 programmable clock (MCLK 59.957 MHz)
(--) S3: Maximum allowed dot-clock: 170.000 MHz
(**) S3: Mode "1024x768": mode clock = 115.500
(**) S3: Mode "800x600": mode clock = 69.650
(**) S3: Mode "640x480": mode clock = 30.000
(--) S3: Operating RAMDAC in pixel multiplex mode
(--) S3: Using 6 bits per RGB value
(--) S3: Virtual resolution set to 1024x768
(--) S3: Local bus LAW is 0xE4000000
(--) S3: Using a banksize of 1024k, line width of 1024
(--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps
(--) S3: Using 8 planes of 960x255 at (0,769) aligned 8 as font cache
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
-xkm -m it -em1
"The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
"Errors from xkbcomp are not fatal to the X server" keymap/xfree86
compiled/xfree86.xkm'
waiting for X server to shut down
===============================================================================
Reply to: