[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Cannot switch my redhat to debian

> You can try adding megaraid to /etc/mkinitramfs/modules - maybe that
> will cause it to be loaded first?
> You could also modify your /etc/fstab and /etc/elilo.conf files to
> permit this other order.
> Or, if you want to avoid issues like this altogether,  you can try
> using the udev /dev/disk/by-* names, which should provide a static
> mapping that's not affected by driver load order.
I cannot try today, but as soon as possible, I will try and send you a report.
The other problem, but not urgent, the graphics card are not recognized by xorg.

lspci : 01:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

/var/log/Xorg.0.log :
(II) Primary Device is: PCI 01:01:0
(II) ATI:  Candidate "Device" section "ATI Technologies, Inc. Rage XL".
(II) ATI:  Shared PCI/AGP Mach64 in slot 1:1:0 detected.
(II) ATI:  Shared PCI/AGP Mach64 in slot 1:1:0 assigned to active "Device" section "ATI Technologies, Inc. Rage XL".
(II) Loading sub module "atimisc"
(II) LoadModule: "atimisc"
(II) Loading /usr/X11R6/lib/modules/drivers/atimisc_drv.so
(II) Module atimisc: vendor="X.Org Foundation"
        compiled for 6.9.0, module version = 6.5.7
        Module class: X.Org Video Driver
        [102] -1        1       0x00006800 - 0x000068ff (0x100) IX[B](B)
(==) ATI(0): Chipset:  "ati".
(**) ATI(0): Depth 24, (--) framebuffer bpp 32
(EE) ATI(0): Adapters found to be in VGA mode on server entry are not supported by the MMIO-only version of this driver.
(II) UnloadModule: "ati"
(II) UnloadModule: "atimisc"
(II) Unloading /usr/X11R6/lib/modules/drivers/atimisc_drv.so
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

many thanks for your help

Reply to: