[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Cannot switch my redhat to debian

I think people on the ia64 port list are probably in a better position to 
help you with this, so I'm forwarding this mail there.


On Thursday 18 May 2006 22:14, De Leeuw Guy wrote:
> I try the entire day to install debian on my main server
> I dowload the etch daily build (20060516) for ia64
> I can boot but the system does not have the driver for the megaraid
> (see my previous post for a detailled hardware configuration) and the
> partition for installing debian is on a disk under this controller, but
> the all disks under the qlogic work fine.
> Finally I boot to a sarge, perfect, I see my 2 systems partitions
> (redhat and debian), I Install these system and change my source.list
> replacing all stable by etch, and finally launch apt-get dist-upgrade.
> After these step, I have normally a new kernel (2.6.15) but the next
> reboot continue to start on the sarge kernel (2.6.8)
> on the efi partition, I upgrade manually the vmlinuz and the initrd,
> reboot and no system disk because missing the driver megaraid :-(
> I known that I can build my own kernel, but for # reasons I prefer a
> kernel available direcly from yours site
> Could you help me ?
> (sorry for my bad english, I'm french speaker, I also post on the ia64
> list)
> Guy

Attachment: pgpfmN14Lwq9Q.pgp
Description: PGP signature

Reply to: