Re: 2.6.x won't boot on PowerEdge 3250
Any ideas?
On Thu, 14 Apr 2005 16:31:29 -0700
Peter Hessler <phessler@coverity.com> wrote:
: On Tue, 29 Mar 2005 17:00:38 -0700
: Bjorn Helgaas <bjorn.helgaas@hp.com> wrote:
:
: : On Tue, 2005-03-29 at 15:52 -0800, Peter Hessler wrote:
: : >
: : > ...
: : > Calling initcall 0xa000000100495a30: mousedev_init+0x0/0x1e0()
: : > mice: PS/2 mouse device common for all mice
: : > Calling initcall 0xa000000100493e70: atkbd_init+0x0/0x40()
: : > ...
: : > Then the pause and bounce.
: :
: : We've reproduced the problem on a Tiger, so I think we
: : should be able to figure it out. It *does* work with
: : the current BK kernel, so we just have to figure out
: : what fixed it.
: :
:
: Ok, I just tried the new 2.6.11-1-mckinley kernel that was very
: recently mentioned, and still no dice. It gets slightly farther, but
: the same behaivour (pause and bounce).
:
:
:
:
: Loading.: Debian GNU/Linux
: Starting: Debian GNU/Linux
: ELILO
:
: ELILO boot: Linux-2.6.11
: Uncompressing Linux... done
: Loading initrd \EFI\debian\boot\initrd.img-2.6.11-1-mckinley...done
: Linux version 2.6.11-1-mckinley (dannf@biglpk) (gcc version 3.3.5
: (Debian 1:3.3.5-12)) #1 Sat Mar 26 21:49:57 MST 2005 EFI v1.10 by
: INTEL: SALsystab=0x3fe4c8c0 ACPI=0x3ffa2000 ACPI 2.0=0x3ffa1000
: INTEL: MPS=0x3ffa0000 SMBIOS=0xf0000 booting generic kernel on
: platform dig ACPI: RSDP (v002 INTEL )
: @ 0x000000003ffa1000 ACPI: XSDT (v001 INTEL SR870BH2 0x01072002 MSFT
: 0x00010013) @ 0x000000003ffa1090 ACPI: FADT (v003 INTEL SR870BH2
: 0x01072002 MSFT 0x00010013) @ 0x000000003ffa1138 ACPI: MADT (v001
: INTEL SR870BH2 0x01072002 MSFT 0x00010013) @ 0x000000003ffa1230 ACPI:
: DSDT (v001 Intel SR870BH2 0x00000000 MSFT 0x0100000d) @
: 0x0000000000000000 efi.trim_top: ignoring 4KB of memory at 0x0 due to
: granule hole at 0x0 efi.trim_top: ignoring 24KB of memory at 0x1000
: due to granule hole at 0x0 efi.trim_top: ignoring 8KB of memory at
: 0x7000 due to granule hole at 0x0 efi.trim_top: ignoring 484KB of
: memory at 0x9000 due to granule hole at 0x0 efi.trim_top: ignoring
: 4KB of memory at 0x84000 due to granule hole at 0x0 efi.trim_top:
: ignoring 108KB of memory at 0x85000 due to granule hole at 0x0
: efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to
: granule hole at 0x0 Initial ramdisk at: 0xe00000003c21e000 (6995968
: bytes) SAL 3.1: Intel Corp
: SR870BH2 version 3.0 SAL Platform features:
: BusLock IRQ_Redirection iosapic_system_init: Disabling PC-AT
: compatible 8259 interrupts ACPI: Local APIC address c0000000fee00000
: ACPI: [APIC:0x07] ignored 1 entries of 2 found PLATFORM int CPEI
: ACPI: (0x3): GSI 22 (level, low) -> CPU 0 (0xc018) vector
: 30 register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-
: level 1 CPUs available, 1 CPUs total MCA related initialization done
: Virtual mem_map starts at 0xa0007fffffc80000
: On node 0 totalpages: 63284
: DMA zone: 63284 pages, LIFO batch:4
: Normal zone: 0 pages, LIFO batch:1
: HighMem zone: 0 pages, LIFO batch:1
: Built 1 zonelists
: Kernel command line: BOOT_IMAGE=scsi0:/EFI/debian/boot/
: vmlinuz-2.6.11-1-mckinley root=/dev/sda2 console=ttyS1,9600,8n1 debug
: initcall_debug ro PID hash table entries: 2048 (order: 11, 65536
: bytes) CPU 0: base freq=199.457MHz, ITC ratio=10/2, ITC
: freq=997.285MHz
: Console: colour VGA+ 80x25 Placing software IO TLB between 0x13d4000 -
: Console: 0x1bd4000
: Memory: 1000000k/1012544k available (4024k code, 25664k reserved,
: 2096k data, 336k init) McKinley Errata 9 workaround not needed;
: disabling it Calibrating delay loop... 1494.72 BogoMIPS (lpj=729088)
: Security Framework v1.0.0 initialized
: Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes)
: Inode-cache hash table entries: 65536 (order: 5, 524288 bytes)
: Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
: checking if image is initramfs...it isn't (bad gzip magic numbers);
: looks like an initrd Freeing initrd memory: 6816kB freed
: Calling initcall 0xa0000001004a8680: init_elf32_binfmt+0x0/0x40()
: Calling initcall 0xa0000001004aa940: helper_init+0x0/0xa0()
: Calling initcall 0xa0000001004ab0b0: pm_init+0x0/0x80()
: Calling initcall 0xa0000001004ab380: ksysfs_init+0x0/0x80()
: Calling initcall 0xa0000001004abb70: filelock_init+0x0/0x80()
: Calling initcall 0xa0000001004ad0c0: init_script_binfmt+0x0/0x40()
: Calling initcall 0xa0000001004ad130: init_elf_binfmt+0x0/0x40()
: Calling initcall 0xa0000001004aa190: netlink_proto_init+0x0/0x3c0()
: NET: Registered protocol family 16
: Calling initcall 0xa0000001004a7a30: kobject_uevent_init+0x0/0xa0()
: Calling initcall 0xa0000001004a8df0: pcibus_class_init+0x0/0x40()
: Calling initcall 0xa0000001004a80a0: pci_driver_init+0x0/0x40()
: Calling initcall 0xa0000001004ab070: tty_class_init+0x0/0x80()
: Calling initcall 0xa00000010049dc80: register_node_type+0x0/0x40()
: Calling initcall 0xa0000001004ad2c0: pm_sysrq_init+0x0/0x60()
: Calling initcall 0xa0000001004aa630: init_bio+0x0/0x160()
: Calling initcall 0xa00000010049ddf0: fbmem_init+0x0/0x140()
: Calling initcall 0xa0000001004aa000: acpi_init+0x0/0x100()
: ACPI: Subsystem revision 20050211
: ACPI: Interpreter enabled
: ACPI: Using IOSAPIC for interrupt routing
: Calling initcall 0xa0000001004aa0b0: acpi_pci_root_init+0x0/0x40()
: Calling initcall 0xa0000001004aa1e0: acpi_pci_link_init+0x0/0xa0()
: Calling initcall 0xa0000001004aa300: acpi_power_init+0x0/0x100()
: Calling initcall 0xa0000001004aa390: acpi_system_init+0x0/0x1a0()
: Calling initcall 0xa0000001004ad210: acpi_event_init+0x0/0x80()
: Calling initcall 0xa0000001004aa6c0: acpi_scan_init+0x0/0xe0()
: ACPI: PCI Root Bridge [PCI0] (00:00)
: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.H2PB._PRT]
: ACPI: PCI Root Bridge [PCI1] (00:02)
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PA._PRT]
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.P2PB._PRT]
: ACPI: PCI Root Bridge [PCI2] (00:05)
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PA._PRT]
: ACPI: PCI Interrupt Routing Table [\_SB_.PCI2.P2PB._PRT]
: ACPI: Device [CSFF] status [00000008]: functional but not present;
: setting present ACPI: PCI Root Bridge [CSFF] (00:ff)
: Calling initcall 0xa0000001004ad620: misc_init+0x0/0x140()
: Calling initcall 0xa0000001004ab960: genhd_device_init+0x0/0xa0()
: Calling initcall 0xa0000001004a7230: input_init+0x0/0x240()
: Calling initcall 0xa0000001004a9e90: pci_acpi_init+0x0/0x240()
: PCI: Using ACPI for IRQ routing
: ** PCI interrupts are no longer routed automatically. If this
: ** causes a device to stop working, it is probably because the
: ** driver failed to call pci_enable_device(). As a temporary
: ** workaround, the "pci=routeirq" argument restores the old
: ** behavior. If this argument makes the device work again,
: ** please email the output of "lspci" to bjorn.helgaas@hp.com
: ** so I can fix the driver.
: Calling initcall 0xa0000001004ad460: sba_init+0x0/0xe0()
: Calling initcall 0xa0000001004abb10: sn_pci_init+0x0/0x200()
: Calling initcall 0xa0000001004a7d90: net_dev_init+0x0/0x340()
: Calling initcall 0xa0000001004a9e10: pktsched_init+0x0/0x1c0()
: Calling initcall 0xa0000001004a9e70: tc_filter_init+0x0/0x80()
: Calling initcall 0xa0000001004a6e90: init_pipe_fs+0x0/0xc0()
: Calling initcall 0xa0000001004aa730: acpi_motherboard_init+0x0/0x80()
: Calling initcall 0xa0000001004ac100: chr_dev_init+0x0/0x160()
: Calling initcall 0xa00000010049f6f0: pfm_init+0x0/0x680()
: perfmon: version 2.0 IRQ 238
: perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
: perfmon: bits)
: Calling initcall 0xa0000001004a8990: salinfo_init+0x0/0x400()
: Calling initcall 0xa0000001004a8e40: create_gate_table+0x0/0x3a0()
: Calling initcall 0xa0000001004a90e0: ia64_mca_late_init+0x0/0x220()
: Calling initcall 0xa0000001004a6950: topology_init+0x0/0x200()
: Calling initcall 0xa0000001004a9510: pfm_default_smpl_init_module
: +0x0/0xe0() perfmon: added sampling format default_format
: perfmon_default_smpl: default_format v2.0 registered
: Calling initcall 0xa0000001004a85a0: ia32_init+0x0/0x120()
: Calling initcall 0xa0000001004a86c0: check_elf32_binfmt+0x0/0xc0()
: Calling initcall 0xa0000001004a9740: create_proc_profile+0x0/0xe0()
: Calling initcall 0xa0000001004a96b0: ioresources_init+0x0/0xc0()
: Calling initcall 0xa0000001004ab9c0: uid_cache_init+0x0/0x100()
: Calling initcall 0xa0000001004aa460: param_sysfs_init+0x0/0x60()
: Calling initcall 0xa0000001004aa830: init_posix_timers+0x0/0x1c0()
: Calling initcall 0xa0000001004aac60: init+0x0/0xc0()
: Calling initcall 0xa00000010049eee0: kallsyms_init+0x0/0x80()
: Calling initcall 0xa0000001004ab2f0: ikconfig_init+0x0/0x80()
: Calling initcall 0xa0000001004abe00: init_per_zone_pages_min+0x0/0xc0
: () Calling initcall 0xa0000001004a9d60: pdflush_init+0x0/0x60()
: Calling initcall 0xa0000001004a9ee0: cpucache_init+0x0/0x40()
: Calling initcall 0xa0000001004aa260: kswapd_init+0x0/0x100()
: Calling initcall 0xa0000001004ad180: gate_vma_init+0x0/0x80()
: Calling initcall 0xa0000001004aac10: procswaps_init+0x0/0x80()
: Calling initcall 0xa0000001004abdf0: init_tmpfs+0x0/0x180()
: Calling initcall 0xa0000001004ab7b0: fasync_init+0x0/0x80()
: Calling initcall 0xa0000001004ac300: aio_setup+0x0/0xe0()
: Calling initcall 0xa0000001004acec0: eventpoll_init+0x0/0x1e0()
: Calling initcall 0xa0000001004acf50: init_sys32_ioctl+0x0/0x120()
: Calling initcall 0xa0000001004ad2a0: dquot_init+0x0/0x260()
: VFS: Disk quotas dquot_6.5.1
: Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
: Calling initcall 0xa0000001004ad5a0: dnotify_init+0x0/0x80()
: Calling initcall 0xa0000001004a5b70: init_devpts_fs+0x0/0xc0()
: Calling initcall 0xa0000001004a5c40: init_cramfs_fs+0x0/0x60()
: Calling initcall 0xa0000001004a5cd0: init_ramfs_fs+0x0/0x40()
: Calling initcall 0xa0000001004a5fe0: init_devfs_fs+0x0/0x240()
: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
: devfs: boot_options: 0x0
: Calling initcall 0xa0000001004aa370: ipc_init+0x0/0x60()
: Calling initcall 0xa0000001004aa7b0: init_mqueue_fs+0x0/0x1a0()
: Calling initcall 0xa0000001004a6040: key_proc_init+0x0/0xa0()
: Calling initcall 0xa0000001004a6450: init_crypto+0x0/0x60()
: Initializing Cryptographic API
: Calling initcall 0xa0000001004a9020: pci_init+0x0/0x80()
: Calling initcall 0xa0000001004a7a20: pci_sysfs_init+0x0/0xa0()
: Calling initcall 0xa0000001004a85b0: pci_proc_init+0x0/0x140()
: Calling initcall 0xa0000001004a0a40: asiliantfb_init+0x0/0xa0()
: Calling initcall 0xa0000001004aa1d0: irqrouter_init_sysfs+0x0/0x60()
: Calling initcall 0xa0000001004adf40: rand_initialize+0x0/0x220()
: Calling initcall 0xa0000001004ab080: tty_init+0x0/0x480()
: Calling initcall 0xa0000001004ab2b0: pty_init+0x0/0x60()
: Calling initcall 0xa0000001004a2300: scdrv_init+0x0/0x660()
: Calling initcall 0xa0000001004abdc0: efi_rtc_init+0x0/0x140()
: EFI Time Services Driver v0.4
: Calling initcall 0xa0000001004abfe0: serio_init+0x0/0x100()
: Calling initcall 0xa0000001004a4470: i8042_init+0x0/0x3a0()
: Calling initcall 0xa0000001004ac9f0: serial8250_init+0x0/0x180()
: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
: enabled Calling initcall 0xa0000001004acaa0: acpi_serial_init+0x0/0x40
: () acpi_serial_port: zero-length IO port range?
: ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
: acpi_serial_port: zero-length IO port range?
: ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
: Calling initcall 0xa0000001004acc90: serial8250_pci_init+0x0/0x40()
: Calling initcall 0xa0000001004acfb0: sn_sal_module_init+0x0/0x200()
: Calling initcall 0xa00000010049f970: elevator_global_init+0x0/0x20()
: Calling initcall 0xa0000001004a60d0: noop_init+0x0/0x40()
: io scheduler noop registered
: Calling initcall 0xa0000001004ac390: as_init+0x0/0xe0()
: io scheduler anticipatory registered
: Calling initcall 0xa0000001004a69b0: deadline_init+0x0/0xe0()
: io scheduler deadline registered
: Calling initcall 0xa0000001004ad050: cfq_init+0x0/0xc0()
: io scheduler cfq registered
: Calling initcall 0xa0000001004a6f50: rd_init+0x0/0x3c0()
: RAMDISK driver initialized: 16 RAM disks of 32768K size 1024
: blocksize Calling initcall 0xa0000001004a6fc0: net_olddevs_init
: +0x0/0xe0() Calling initcall 0xa0000001004a72f0: mousedev_init
: +0x0/0x1e0()
: mice: PS/2 mouse device common for all mice
: Calling initcall 0xa0000001004a50b0: atkbd_init+0x0/0x40()
: Calling initcall 0xa0000001004a97e0: init_soundcore+0x0/0xe0()
: Calling initcall 0xa0000001004a79d0: sn_salinfo_init+0x0/0x40()
: Calling initcall 0xa0000001004a01f0: prominfo_init+0x0/0x2e0()
: Calling initcall 0xa0000001004ab7d0: flow_cache_init+0x0/0x160()
: Calling initcall 0xa0000001004a9580: llc_init+0x0/0x100()
: Calling initcall 0xa0000001004a6b80: snap_init+0x0/0x80()
: Calling initcall 0xa0000001004a6e10: rif_init+0x0/0x120()
: Calling initcall 0xa0000001004ac060: inet_init+0x0/0x420()
: NET: Registered protocol family 2
: IP: routing cache hash table of 32768 buckets, 256Kbytes
: TCP established hash table entries: 131072 (order: 6, 1048576 bytes)
: TCP bind hash table entries: 65536 (order: 5, 524288 bytes)
: TCP: Hash tables configured (established 131072 bind 65536)
: Calling initcall 0xa0000001004ad4c0: af_unix_init+0x0/0x100()
: NET: Registered protocol family 1
: Calling initcall 0xa0000001004ad750: packet_init+0x0/0xb0()
: NET: Registered protocol family 17
: Calling initcall 0xa0000001004a7260: acpi_poweroff_init+0x0/0x80()
: Calling initcall 0xa0000001004aaa80: seqgen_init+0x0/0x40()
: Calling initcall 0xa0000001004ac920: serial8250_late_console_init
: +0x0/0x60() Calling initcall 0xa0000001004acd60:
: early_uart_console_switch+0x0/0x160() Calling initcall
: 0xa0000001004aa9b0: net_random_reseed+0x0/0x60() RAMDISK: cramfs
: 0xa0000001004aa9b0: filesystem found at block 0
: RAMDISK: Loading 6832KiB [1 disk] into ram disk... done.
: VFS: Mounted root (cramfs filesystem) readonly.
: (pause and bounce)
:
: /etc/elilo.conf:
: ...
: image=/boot/vmlinuz-2.6.11-1-mckinley
: label=Linux-2.6.11
: root=/dev/sda2
: read-only
: append="console=ttyS1,9600,8n1 debug initcall_debug"
: initrd=/boot/initrd.img-2.6.11-1-mckinley
: ...
:
Reply to: