[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: problem with hurd image



2021-05-10 8:35 GMT+01:00, Samuel Thibault <sthibault@debian.org>:
> (...)
> But is netdde properly installed on /dev/netdde? as well as /dev/eth0?
>
> Again,
> *please tell us exactly what this means: does /dev/eth0 not show up with

OK. My hardware is Celeron 300Mhz (up to 415MHZ), 512MB of RAM and
ethernet card ISA NE2000 (clone) (AUI + AUI-UTP converter).

I have no net when I use standard gnumach-1.8-486.gz from Debian.
I have recompilef *.src.deb packet of gnumach adding NE2K (configure
--with...) and now my network is working.

Thera are two files attached:
dmesg-fail.txt - standard gnumach from DEbian distro.
dmesg-ok.txt - "my" recompiled gnumach.
GNU Mach 1.8+git20210404-486
biosmem: physical memory map:
biosmem: 000000000000000000:0000000000000a0000, available
biosmem: 0000000000000f0000:000000000000100000, reserved
biosmem: 000000000000100000:000000000020000000, available
biosmem: 0000000000ffff0000:000000000100000000, reserved
vm_page: page table size: 131056 entries (7168k)
vm_page: DMA: pages: 4080 (15M), free: 0 (0M)
vm_page: DMA: min:500 low:600 high:1000
vm_page: DIRECTMAP: pages: 126976 (496M), free: 123340 (481M)
vm_page: DIRECTMAP: min:6348 low:7618 high:12697
GNU Mach 1.8+git20210404-486
biosmem: physical memory map:
biosmem: 000000000000000000:0000000000000a0000, available
biosmem: 0000000000000f0000:000000000000100000, reserved
biosmem: 000000000000100000:000000000020000000, available
biosmem: 0000000000ffff0000:000000000100000000, reserved
vm_page: page table size: 131056 entries (7168k)
vm_page: DMA: pages: 4080 (15M), free: 0 (0M)
vm_page: DMA: min:500 low:600 high:1000
vm_page: DIRECTMAP: pages: 126976 (496M), free: 123340 (481M)
vm_page: DIRECTMAP: min:6348 low:7618 high:12697
pcibios_init : BIOS32 Service Directory structure at 0xfaec0
pcibios_init : BIOS32 Service Directory entry at 0xfb340
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb370
Probing PCI hardware.
ide: Intel 82371 PIIX4 (dual FIFO) DMA Bus Mastering IDE 
    Controller on PCI bus 0 function 57
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
hd0: got CHS=9729/255/63 CTL=8 from BIOS
intnull(14)
hd0: ST380021A, 76319MB w/2048kB Cache, CHS=9729/255/63, UDMA
hd1: SAMSUNG CDRW/DVD SM-308B, ATAPI CDROM drive
intnull(15)
hd2: ST340823A, 38166MB w/512kB Cache, CHS=4865/255/63, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077

probing scsi 0/16: advansys 
probing scsi 1/16: BusLogic 
probing scsi 2/16: UltraStor 14F/34F rev. 4.33.00  
probing scsi 3/16: UltraStor 14F/24F/34F 
probing scsi 4/16: Adaptec 152x SCSI driver; $Revision: 1.1 $ 
probing scsi 5/16: Adaptec 174x (EISA) 
probing scsi 6/16:  
probing scsi 7/16: Always IN2000 
probing scsi 8/16:  
probing scsi 9/16:  
probing scsi 10/16:  
probing scsi 11/16: Trantor T128/T128F/T228 
probing scsi 12/16: DTC 3180/3280  
probing scsi 13/16: Tekram DC390(T) V1.11 Feb-05-1997 
probing scsi 14/16:  
probing scsi 15/16: ncr53c8xx - revision 2.5f.1 
done
scsi : 0 hosts.
scsi : detected total.
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2 hd0s3 hd0s4 < hd0s5 hd0s6 hd0s7 hd0s8 hd0s9 >
 hd2: hd2s1 hd2s2 hd2s3 hd2s4
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)
com 2 out of range
lpr0: at atbus2, port = 378, spl = 6, pic = 7.
module 0: ext2fs --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume)
module 1: exec $(exec-task=task-create)
2 multiboot modules
task loaded: ext2fs -
GNU Mach 1.8+git20210404-486
biosmem: physical memory map:
biosmem: 000000000000000000:0000000000000a0000, available
biosmem: 0000000000000f0000:000000000000100000, reserved
biosmem: 000000000000100000:000000000020000000, available
biosmem: 0000000000ffff0000:000000000100000000, reserved
vm_page: page table size: 131056 entries (7168k)
vm_page: DMA: pages: 4080 (15M), free: 0 (0M)
vm_page: DMA: min:500 low:600 high:1000
vm_page: DIRECTMAP: pages: 126976 (496M), free: 123460 (482M)
vm_page: DIRECTMAP: min:6348 low:7618 high:12697
GNU Mach 1.8+git20210404-486
biosmem: physical memory map:
biosmem: 000000000000000000:0000000000000a0000, available
biosmem: 0000000000000f0000:000000000000100000, reserved
biosmem: 000000000000100000:000000000020000000, available
biosmem: 0000000000ffff0000:000000000100000000, reserved
vm_page: page table size: 131056 entries (7168k)
vm_page: DMA: pages: 4080 (15M), free: 0 (0M)
vm_page: DMA: min:500 low:600 high:1000
vm_page: DIRECTMAP: pages: 126976 (496M), free: 123460 (482M)
vm_page: DIRECTMAP: min:6348 low:7618 high:12697
pcibios_init : BIOS32 Service Directory structure at 0xfaec0
pcibios_init : BIOS32 Service Directory entry at 0xfb340
pcibios_init : PCI BIOS revision 2.10 entry at 0xfb370
Probing PCI hardware.
ide: Intel 82371 PIIX4 (dual FIFO) DMA Bus Mastering IDE 
    Controller on PCI bus 0 function 57
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
hd0: got CHS=9729/255/63 CTL=8 from BIOS
intnull(14)
hd0: ST380021A, 76319MB w/2048kB Cache, CHS=9729/255/63, UDMA
hd1: SAMSUNG CDRW/DVD SM-308B, ATAPI CDROM drive
intnull(15)
hd2: ST340823A, 38166MB w/512kB Cache, CHS=4865/255/63, UDMA
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)
NE*000 ethercard probe at 0x300:  0 80 48 83 cd ab
eth0: NE2000 found at 0x300, using IRQ 9.
Partition check (DOS partitions):
 hd0: hd0s1 hd0s2 hd0s3 hd0s4 < hd0s5 hd0s6 hd0s7 hd0s8 hd0s9 >
 hd2: hd2s1 hd2s2 hd2s3 hd2s4
com0: at atbus0, port = 3f8, spl = 6, pic = 4. (DOS COM1)
com1: at atbus1, port = 2f8, spl = 6, pic = 3. (DOS COM2)
com 2 out of range
lpr0: at atbus2, port = 378, spl = 6, pic = 7.
module 0: ext2fs --multiboot-command-line=${kernel-command-line} --host-priv-port=${host-port} --device-master-port=${device-port} --exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume)
module 1: exec $(exec-task=task-create)
2 multiboot modules
task loaded: ext2fs --multi

Reply to: