Re: more hurd problems
On Fri, 13 Nov 1998, David Scott +44 1383 821921 wrote:
> > NE*0000 ethercard probe at 0x300: 00 4f 4c 03 ca 8a
> > eth0: NE2000 found at 0x300, using IRQ 3
> > com1: at atbus1The device below will clobber IRQ3.
> > You have two devices at the same IRQ
> > This won't work. Reconfigure your hardware and try again.
> > com1: port = 2f8, spl = 6, pic =3.
> > tty00 at 0x03f8 (irq=4) is a 16550A
> > tty01 at 0x02f8 (irq=3) is a 16550A
> It seems to me that the problem is that com1 and ne2000 are using the same IRQ.
> Can you change the IRQ of the ethernet card to something other than 3? There
> may be physical switches.
Com1 - that's the printer, yes?
So would unplugging it from the machine work?
As I don't think there are physical switches on the network card (and flu
is bad enough to make me reluctant to take the case off to have a look)...
Elen sila lumenn' omentielvo
Steward of the Cambridge Tolkien Society
Selwyn College Computer Support