Re: more hurd problems
<snip>
> NE*0000 ethercard probe at 0x300: 00 4f 4c 03 ca 8a
> eth0: NE2000 found at 0x300, using IRQ 3
<snip>
> com1: at atbus1The device below will clobber IRQ3.
> You have two devices at the same IRQ
> This won't work. Reconfigure your hardware and try again.
> com1: port = 2f8, spl = 6, pic =3.
<snip>
> tty00 at 0x03f8 (irq=4) is a 16550A
> tty01 at 0x02f8 (irq=3) is a 16550A
<snip>
It seems to me that the problem is that com1 and ne2000 are using the same IRQ.
Can you change the IRQ of the ethernet card to something other than 3? There
may be physical switches.
David Scott
Reply to: