Re: New install on HP C3750
Hello all, thanks for your answers.
I made some progress on configuring the C3750.
I'm attaching the serial console buffer from bootstrap to login. As I said, this is my first time with Linux-HPPA and also for debian, so if you see something strange please do tell me.
Referring the mirror issue, I searched the net and eventually I found something viable for debian - hppa
now my /etc/apt/sources.list file looks like this:
#deb cdrom:[Debian GNU/Linux 5.0.10 _Lenny_ - Official hppa DVD Binary-1 20120310-16:52]/ lenny contrib main
(I chosed to comment out the dvd because I'm afraid it will give me more reading errors).
I can now use apt-get to install packages (also aptitude works, although I don't know how to use it).
I would love to upgrade to an higher version of debian and linux kernel. Supposing I add in sources.list file some recent source mirros, is there a way to download, compile and install in batch mode?
Thanks, cheers
Paolo
Firmware Version 2.0
Duplex Console IO Dependent Code (IODC) revision 1
------------------------------------------------------------------------------
(c) Copyright 1995-2000, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------
Processor Speed State Coprocessor State I/D Cache
--------- -------- --------------------- ----------------- -------------
0 875 MHz Active Functional 768 kB/1536 kB
Central Bus Speed: 120 MHz
Available memory: 4294967296 bytes
Good memory required: 31981568 bytes
Primary boot path: FWSCSI.5.0
Alternate boot path: IDE
Console path: GRAPHICS(2)
Keyboard path: USB
Processor is booting from first available device.
To discontinue, press any key within 10 seconds.
10 seconds expired.
Proceeding...
Searching for device(s) with bootable media...
This may take several minutes.
To discontinue search, press any key (termination may not be immediate).
Attempting to boot Primary Path...
BOOTABLE DEVICE FOUND:
Path Number Device Path Device Type and Utilities
----------- ----------------- -------------------------
P0 FWSCSI.5.0 HP 36.4GST336607LC
IPL
Booting...
Boot IO Dependent Code (IODC) revision 0
HARD Booted.
palo ipl 1.14 root@penalosa Wed Oct 8 15:04:37 UTC 2008
Skipping extended partition 6 - beyond reach of IPL
Partition Start(MB) End(MB) Id Type
1 1 15 f0 Palo
2 16 47 83 ext2
3 48 1004 82 swap
5 1005 13688 83 ext2
PALO(F0) partition contains:
0/vmlinux32 4188604 bytes @ 0x48000
Information: No console specified on kernel command line. This is normal.
PALO will choose the console currently used by firmware (serial).
Command line for kernel: 'root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux'
Selected kernel: /vmlinux from partition 2
Selected ramdisk: /initrd.img from partition 2
ELF32 executable
Entry 00100000 first 00100000 n 3
Segment 0 load 00100000 size 2475892 mediaptr 0x1000
Segment 1 load 0035d000 size 462848 mediaptr 0x25e000
Segment 2 load 0040c000 size 241797 mediaptr 0x2cf000
Loading ramdisk 2535749 bytes @ 3fd83000...
Branching to kernel entry point 0x00100000. If this is the last
message you see, you may need to switch your console. This is
a common symptom -- search the FAQ and mailing list at parisc-linux.org
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-parisc (Debian 2.6.26-29) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 Sun Mar 4 17:37:14 UTC 2012
[ 0.000000] FP[0] enabled: Rev 1 Model 19
[ 0.000000] The 32-bit Kernel has started...
[ 0.000000] console [ttyB0] enabled
[ 0.000000] Initialized PDC Console for debugging.
[ 0.000000] Determining PDC firmware type: System Map.
[ 0.000000] model 00005dc0 00000481 00000000 00000002 77416f84 100000f0 00000008 000000b2 000000b2
[ 0.000000] vers 00000301
[ 0.000000] CPUID vers 19 rev 11 (0x0000026b)
[ 0.000000] capabilities 0x7
[ 0.000000] model 9000/785/C3750
[ 0.000000] Memory truncated to 3584 MB
[ 0.000000] Total Memory: 3584 MB
[ 0.000000] initrd: 4fd83000-4ffee145
[ 0.000000] initrd: reserving 3fd83000-3ffee145 (mem_max e0000000)
[ 0.000000] LCD display at f05d0008,f05d0000 registered
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 910336
[ 0.000000] Kernel command line: root=/dev/sda5 HOME=/ console=ttyS0 TERM=vt102 palo_kernel=2/vmlinux
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Console: colour dummy device 160x64
[17179569.252000] Dentry cache hash table entries: 524288 (order: 9, 2097152 bytes)
[17179569.356000] Inode-cache hash table entries: 262144 (order: 8, 1048576 bytes)
[17179569.624000] Memory: 3624832k/3670016k available (1964k kernel code, 44904k reserved, 883k data, 224k init)
[17179569.752000] virtual kernel memory layout:
[17179569.752000] vmalloc : 0x00008000 - 0x0f000000 ( 239 MB)
[17179569.752000] memory : 0x10000000 - 0xf0000000 (3584 MB)
[17179569.752000] .init : 0x10410000 - 0x10448000 ( 224 kB)
[17179569.752000] .data : 0x102eb0b0 - 0x103c8000 ( 883 kB)
[17179569.752000] .text : 0x10100000 - 0x102eb0b0 (1964 kB)
[17179570.296000] Security Framework initialized
[17179570.352000] SELinux: Disabled at boot.
[17179570.404000] Capability LSM initialized
[17179570.456000] Mount-cache hash table entries: 512
[17179570.520000] Initializing cgroup subsys ns
[17179570.576000] Initializing cgroup subsys cpuacct
[17179570.640000] Initializing cgroup subsys devices
[17179570.700000] net_namespace: 648 bytes
[17179570.752000] NET: Registered protocol family 16
[17179570.816000] EISA bus registered
[17179570.860000] Searching for devices...
[17179571.140000] Found devices:
[17179571.180000] 1. Astro BC Runway Port at 0xfed00000 [10] { 12, 0x0, 0x582, 0x0000b }
[17179571.280000] 2. Elroy PCI Bridge at 0xfed30000 [10/0] { 13, 0x0, 0x782, 0x0000a }
[17179571.380000] 3. Elroy PCI Bridge at 0xfed32000 [10/1] { 13, 0x0, 0x782, 0x0000a }
[17179571.484000] 4. Elroy PCI Bridge at 0xfed38000 [10/4] { 13, 0x0, 0x782, 0x0000a }
[17179571.584000] 5. Elroy PCI Bridge at 0xfed3c000 [10/6] { 13, 0x0, 0x782, 0x0000a }
[17179571.684000] 6. Allegro W2 at 0xfffa0000 [32] { 0, 0x0, 0x5dc, 0x00004 }
[17179571.776000] 7. Memory at 0xfed10200 [49] { 1, 0x0, 0x09c, 0x00009 }
[17179571.860000] Enabling regular chassis codes support v0.05
[17179572.068000] CPU(s): 1 x PA8700 (PCX-W2) at 875.000000 MHz
[17179572.144000] Setting cache flush threshold to 2e0 (1 CPUs online)
[17179572.256000] SBA found Astro 2.1 at 0xfed00000
[17179572.316000] Elroy version TR4.0 (0x5) found at 0xfed30000
[17179572.392000] PCI: Enabled native mode for NS87415 (pif=0x8f)
[17179572.472000] Elroy version TR4.0 (0x5) found at 0xfed32000
[17179572.548000] Elroy version TR4.0 (0x5) found at 0xfed38000
[17179572.624000] Elroy version TR4.0 (0x5) found at 0xfed3c000
[17179572.704000] powersw: Soft power switch at 0xf0400804 enabled.
[17179572.800000] NET: Registered protocol family 2
[17179572.900000] IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
[17179572.996000] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[17179573.112000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[17179573.200000] TCP: Hash tables configured (established 524288 bind 65536)
[17179573.292000] TCP reno registered
[17179573.348000] NET: Registered protocol family 1
[17179573.408000] checking if image is initramfs... it is
[17179573.892000] Freeing initrd memory: 2476k freed
[17179573.956000] Enabling PDC chassis warnings support v0.05
[17179574.028000] unwind_init: start = 0x1035ee40, end = 0x10386210, entries = 10045
[17179574.128000] WARNING: Out of order unwind entry! 10360830 and 10360840
[17179574.216000] WARNING: Out of order unwind entry! 10360840 and 10360850
[17179574.304000] audit: initializing netlink socket (disabled)
[17179574.376000] type=2000 audit(1355345608.194:1): initialized
[17179574.452000] VFS: Disk quotas dquot_6.5.1
[17179574.508000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179574.600000] msgmni has been set to 7085
[17179574.652000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[17179574.756000] io scheduler noop registered
[17179574.808000] io scheduler anticipatory registered
[17179574.872000] io scheduler deadline registered
[17179574.932000] io scheduler cfq registered (default)
[17179575.000000] SuperIO: Found NS87560 Legacy I/O device at 0000:00:0e.1 (IRQ 67)
[17179575.096000] SuperIO: Serial port 1 at 0x3f8
[17179575.156000] SuperIO: Serial port 2 at 0x2f8
[17179575.212000] SuperIO: Parallel port at 0x378
[17179575.272000] SuperIO: Floppy controller at 0x3f0
[17179575.336000] SuperIO: ACPI at 0x7e0
[17179575.384000] SuperIO: USB regulator enabled
[17179575.444000] PDC Stable Storage facility v0.30
[17179575.840000] STI GSC/PCI core graphics driver Version 0.9a
[17179575.920000] Generic RTC Driver v1.07
[17179575.972000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[17179576.076000] serial8250: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
[17179576.160000] console handover: boot [ttyB0] -> real [ttyS0]
[17179576.232000] serial8250: ttyS1 at I/O 0x2f8 (irq = 4) is a 16550A
[17179576.312000] brd: module loaded
[17179576.352000] mice: PS/2 mouse device common for all mice
[17179576.420000] TCP cubic registered
[17179576.460000] NET: Registered protocol family 17
[17179576.516000] registered taskstats version 1
[17179576.568000] Freeing unused kernel memory: 224k freed
Loading, please wait...
Begin: Loading essential drivers ... [17179576.924000] SCSI subsystem initialized
[17179577.420000] sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 68
[17179577.488000] sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
[17179577.572000] sym0: SCSI BUS has been reset.
[17179577.628000] sym0: SCSI BUS mode change from SE to SE.
[17179577.696000] sym0: SCSI BUS has been reset.
[17179577.748000] scsi0 : sym-2.2.3
[17179578.008000] sym1: <896> rev 0x7 at pci 0000:00:0f.1 irq 68
[17179578.080000] sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[17179578.160000] sym1: SCSI BUS has been reset.
[17179578.220000] scsi1 : sym-2.2.3
done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Waiting for root file system ... [17179582.628000] scsi 1:0:5:0: Direct-Access HP 36.4G ST336607LC HPC3 PQ: 0 ANSI: 3
[17179582.728000] target1:0:5: tagged command queuing enabled, command queue depth 16.
[17179582.820000] target1:0:5: Beginning Domain Validation
[17179582.884000] target1:0:5: asynchronous
[17179582.940000] target1:0:5: wide asynchronous
[17179582.992000] target1:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
[17179583.080000] target1:0:5: Domain Validation skipping write tests
[17179583.156000] target1:0:5: Ending Domain Validation
[17179583.220000] scsi 1:0:6:0: Direct-Access HP 36.4G ST336607LC HPC3 PQ: 0 ANSI: 3
[17179583.320000] target1:0:6: tagged command queuing enabled, command queue depth 16.
[17179583.412000] target1:0:6: Beginning Domain Validation
[17179583.476000] target1:0:6: asynchronous
[17179583.532000] target1:0:6: wide asynchronous
[17179583.584000] target1:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31)
[17179583.676000] target1:0:6: Domain Validation skipping write tests
[17179583.748000] target1:0:6: Ending Domain Validation
[17179586.204000] Driver 'sd' needs updating - please use bus_type methods
[17179586.324000] sd 1:0:5:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
[17179586.412000] sd 1:0:5:0: [sda] Write Protect is off
[17179586.476000] sd 1:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[17179586.580000] sd 1:0:5:0: [sda] 71132960 512-byte hardware sectors (36420 MB)
[17179586.672000] sd 1:0:5:0: [sda] Write Protect is off
[17179586.732000] sd 1:0:5:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[17179586.836000] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[17179586.960000] sd 1:0:5:0: [sda] Attached SCSI disk
[17179587.036000] sd 1:0:6:0: [sdb] 71132960 512-byte hardware sectors (36420 MB)
[17179587.124000] sd 1:0:6:0: [sdb] Write Protect is off
[17179587.184000] sd 1:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[17179587.296000] sd 1:0:6:0: [sdb] 71132960 512-byte hardware sectors (36420 MB)
[17179587.380000] sd 1:0:6:0: [sdb] Write Protect is off
[17179587.444000] sd 1:0:6:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[17179587.548000] sdb: sdb1
[17179587.588000] sd 1:0:6:0: [sdb] Attached SCSI disk
done.
Begin: Running /scripts/local-premount ... done.
[17179588.380000] kjournald starting. Commit interval 5 seconds
[17179588.448000] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ... done.
done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd[17179591.064000] udevd version 125 started
.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[17179594.976000] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[17179595.060000] tulip0: no phy info, aborting mtable build
[17179595.128000] tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
[17179595.228000] eth0: Digital DS21142/43 Tulip rev 65 at MMIO 0xf4008000, 00:30:6e:48:bd:b0, IRQ 65.
[17179595.440000] Uniform Multi-Platform E-IDE driver
[17179595.496000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179595.652000] usbcore: registered new interface driver usbfs
[17179595.720000] usbcore: registered new interface driver hub
[17179595.952000] usbcore: registered new device driver usb
[17179596.116000] NS87415: IDE controller (0x100b:0x0002 rev 0x03) at PCI slot 0000:00:0e.0
[17179596.212000] NS87415: 100% native mode on irq 7
[17179596.272000] ide0: BM-DMA at 0x0a00-0x0a07
[17179596.328000] ide1: BM-DMA at 0x0a08-0x0a0f
[17179596.884000] hda: PHILIPS DROM6216, ATAPI CD/DVD-ROM drive
[17179597.860000] ide0 at 0xf00-0xf07,0xe02 on irq 7
[17179597.916000] ide1 at 0xd00-0xd07,0xb02 on irq 7
[17179598.376000] ohci_hcd 0000:00:0e.2: OHCI Host Controller
[17179598.440000] ohci_hcd 0000:00:0e.2: new USB bus registered, assigned bus number 1
[17179598.532000] ohci_hcd 0000:00:0e.2: irq 1, io mem 0xf4007000
[17179598.676000] usb usb1: configuration #1 chosen from 1 choice
[17179598.748000] hub 1-0:1.0: USB hub found
[17179598.796000] hub 1-0:1.0: 3 ports detected
[17179598.952000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[17179599.036000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[17179599.124000] usb usb1: Product: OHCI Host Controller
[17179599.184000] usb usb1: Manufacturer: Linux 2.6.26-2-parisc ohci_hcd
[17179599.264000] usb usb1: SerialNumber: 0000:00:0e.2
[17179599.736000] hda: ATAPI 48X DVD-ROM drive, 512kB Cache
[17179599.800000] Uniform CD-ROM driver Revision: 3.20
done.
Setting the system clock.
Activating swap...[17179601.024000] Adding 979956k swap on /dev/sda3. Priority:-1 extents:1 across:979956k
done.
Checking root file system...fsck 1.41.3 (12-Oct-2008)
/dev/sda5: clean[17179601.460000] EXT3 FS on sda5, ,internal journal
3923/812800 files, 109058/3247130 blocks
done.
Setting the system clock.
Cleaning up ifupdown....
Loading kernel modules...[17179602.440000] LASI 82596 driver - Revision: 1.30
[17179602.556000] loop: module loaded
done.
Checking file systems...fsck 1.41.3 (12-Oct-2008)
/dev/sda2: clean, 17/16064 files, 9406/32130 blocks
/dev/sdb1: clean, 15/2223872 files, 184647/8889961 blocks
/dev/sda6: clean, 87806/915712 files, 548832/3662812 blocks
/dev/sda7: clean, 11/305824 files, 54397/1220932 blocks
/dev/sda8: clean, 18/61312 files, 8265/244983 blocks
/dev/sda9: clean, 6556/64384 files, 115731/257032 blocks
done.
Setting kernel variables (/etc/sysctl.conf)...done.
Mounting local filesystems...[17179604.352000] kjournald starting. Commit interval 5 seconds
[17179604.424000] EXT3 FS on sda6, internal journal
[17179604.480000] EXT3-fs: mounted filesystem with ordered data mode.
[17179604.576000] kjournald starting. Commit interval 5 seconds
[17179604.648000] EXT3 FS on sda7, internal journal
[17179604.700000] EXT3-fs: mounted filesystem with ordered data mode.
[17179604.832000] kjournald starting. Commit interval 5 seconds
[17179604.964000] EXT3 FS on sda8, internal journal
[17179605.016000] EXT3-fs: mounted filesystem with ordered data mode.
[17179605.168000] kjournald starting. Commit interval 5 seconds
[17179605.244000] EXT3 FS on sda9, internal journal
[17179605.296000] EXT3-fs: mounted filesystem with ordered data mode.
[17179605.436000] kjournald starting. Commit interval 5 seconds
[17179605.504000] EXT3 FS on sdb1, internal journal
[17179605.560000] EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...[17179607.164000] NET: Registered protocol family 10
[17179607.220000] lo: Disabled Privacy Extensions
done.
Starting portmap daemon....
Starting NFS common utilities: statd.
Setting console screen modes and fonts.
Setting up ALSA...done.
INIT: Entering runlevel: 2
Loading cpufreq kernel modules...done (none).
Starting enhanced syslogd: rsyslogd.
Starting system message bus: dbus.
Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon.
Starting domain name service...: bind9.
Starting domain name service: lwresd.
Starting OpenBSD Secure Shell server: sshd.
CPUFreq Utilities: Setting ondemand CPUFreq governor...disabled, governor not available...done.
Starting PostgreSQL 8.3 database server: main.
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
Starting Common Unix Printing System: cupsd[17179622.728000] lp: driver loaded but no devices found
.
Starting MTA: exim4.
ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken failed!
Starting kerneloops:
Starting NFS common utilities: statd.
[17179625.528000] RPC: Registered udp transport module.
[17179625.588000] RPC: Registered tcp transport module.
[17179625.756000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Exporting directories for NFS kernel daemon....
Starting NFS kernel daemon: nf[17179625.964000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
sd[17179626.076000] NFSD: starting 90-second grace period
mountd.
Starting internet superserver: inetd.
Starting Samba daemons: nmbd smbd.
Not starting S.M.A.R.T. daemon smartd, disabled via /etc/default/smartmontools (warning).
Starting the Winbind daemon: winbind.
Starting DHCP D-Bus daemon: dhcdbd.
Starting Hardware abstraction layer: hald.
Starting network connection manager: NetworkManager.
Starting network events dispatcher: NetworkManagerDispatcher.
Starting GNOME Display Manager: gdm.
Starting System Tools Backends: system-tools-backends.
Starting Netatalk services (this will take a while): socket: Address family not supported by protocol
socket: Address family not supported by protocol
atalkd: can't get interfaces, exiting.
Starting anac(h)ronistic cron: anacron.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: crond.
Starting web server: apache2apache2: apr_sockaddr_info_get() failed for rocky
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerNam[17179632.456000] eth0: Setting full-duplex based on MII#1 link partner capability of 45e1.
e
.
Debian GNU/Linux 5.0 rocky ttyS0
rocky login:
Reply to: