[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Can't generate the cabrillo file!!!



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

El Mié 30 Oct 2002 12:10, reinc@iae.nl escribió:

> Of course you have to generate it with the right call and information, but
> this is the right format. So if your cabrillo file looks like this, you
> are o.k.
Thank you very much.

> Congrats for the nice score...
We were a multi-multi ;-) so the score wasn't too nice...hi, hi, hi... Well it 
wasn't bad at all for us...
We used:
	4ele 10m (home made)
	3ele 15m (home made and not very well adjusted)
	20m dipole
	40m dipole
	80m vertical (HF2V)
	
The rigs were IC-746, IC-7400, TS-50 so no more than 90W in any band.
But we enjoyed a lot the CQWW!!

> I see from your log that you did not use the M2 category. Otherwise the
> "0" at the end would have indicated which transmitter made the qso,
> and the tlf log would have "*"'s in it.
Well... i made a mistake and we started with tlf-0.8.2 and after a while i 
updated to 0.8.3 and i did not know how to use M2... and we had no time to 
test as we arrived to the contest place at 15:30 UTC of friday and we had to 
set everything  up the three of us that were not working at this time...
We were all of us at 23:30UTC.... just half an hour before the contest's 
start!!!

> You HAVE to tell me how the networking functioned :-)
It worked... quite well, congratulations Rein!

We used three PC with Debian 3.0 and Orinoco wireless pcmcia cards in Ad-hoc 
mode.
I really recomend this setup as is completely free of RFI ;-) as there are not 
ethernet cables!!
We noticed that sometimes tlf did not send the qso just as it was entered and 
sometimes i took till 30 secs to sent it! :-O As it is not problematic 
because you don't have to use a serial number or so, maybe... in a 
multi-single in WPX it is a problem.
AH! The "talk" is not "nice"... as you see (without configuring anything) only 
"one" line and the line is not cleared before writing the new one (maybe a 
bug) so if you enter:
"hello this is just a test of the talk feature"
And then:
"yes and it works"
You will see in the PC receiving the talks:
"yes and it worksust a test of the talk feature" ;-)

Maybe just something as a "clear line" in the "show" command would fix that.

> P.S.: I send you the complete cabrillo file per private mail.
Thanks!
I am checking the logs so i would wait until you release 0.8.6 to run it on my 
PC with the checked logs.

- -- 
Un saludo,
	Jaime Robles, EA4TV
	jaime@robles.nu

Visita	http://www.redlibre.net - La Red Libre de todos!		
	http://smsdx.net - El DXCluster en tu movil!

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.0 (GNU/Linux)

iD8DBQE9v8HGER46oL+8yYURAoj2AJ0QCbV4LPeTVO30UBt2MvNkAut5tgCbBAHB
g7+KI8qrkMSME5hlYHNvszM=
=9BWH
-----END PGP SIGNATURE-----



Reply to: