[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [Pkg-xen-devel] Xen status in lenny?



My first message was refused because it was to long. Another try...

Bastian Blank schreef:
> > On Thu, Sep 18, 2008 at 11:52:09AM +0200, Paul van der Vlis wrote:
>> >> I have it running on my amd64 machine!
> >
> > Okay.

I use now the try4 packages (amd64) on the dom0. I did not have problems
with the try3-packages.

>> >> - the VM's do not start automatically, but they start with "xm
create".
> >
> > Hmm. Please show the xend log (/var/log/xen/xend.log) from before the
> > manual start.

When I start a VM once with "xm create", the next time it starts
automatically.

>> >> - I can ping and SSH the VM from the dom0, not from the internet.
> >
> > Please use wireshark/tshark/tcpdump to find the interface where is gets
> > lost.

My problem is that I don't have a xenbr-device:
[2008-09-22 10:49:20 3031] INFO (XendNetwork:114) Not recreating missing
unmanaged network xenbr1

Special on my machine is that I use eth1 and not eth0:
------
xen:/var/log/xen# ifconfig
eth1      Link encap:Ethernet  HWaddr 00:30:48:93:50:3d
          inet addr:91.198.178.10  Bcast:91.198.178.255  Mask:255.255.255.0
          inet6 addr: fe80::230:48ff:fe93:503d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12572 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7291 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:9428884 (8.9 MiB)  TX bytes:738404 (721.0 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:48 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4365 (4.2 KiB)  TX bytes:4365 (4.2 KiB)

peth1     Link encap:Ethernet  HWaddr 00:30:48:93:50:3d
          inet6 addr: fe80::230:48ff:fe93:503d/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:12757 errors:0 dropped:0 overruns:0 frame:0
          TX packets:7343 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:9626551 (9.1 MiB)  TX bytes:739319 (721.9 KiB)
          Memory:e8200000-e8220000

vif1.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:615 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2619 errors:0 dropped:8 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:37966 (37.0 KiB)  TX bytes:168744 (164.7 KiB)

vif2.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2534 errors:0 dropped:6 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:28 (28.0 B)  TX bytes:162432 (158.6 KiB)

vif3.0    Link encap:Ethernet  HWaddr fe:ff:ff:ff:ff:ff
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING PROMISC MULTICAST  MTU:1500  Metric:1
          RX packets:1 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2530 errors:0 dropped:6 overruns:0 carrier:0
          collisions:0 txqueuelen:32
          RX bytes:28 (28.0 B)  TX bytes:162200 (158.3 KiB)
-----

> > Please make sure that the domains are restarted and not only
> > restored.

I rebooted the machine, is that enough?

> > Also please show the output of xm dmesg and dmesg.

My message became too long. You can see them here:
http://www.vandervlis.nl/log

With regards,
Paul van der Vlis.


-- 
http://www.vandervlis.nl/


Reply to: