[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#444115: general: network interface (eth0) gets undetected after restrat checked using ifconfig -a



On Wednesday 26 September 2007 13:33:09 Josselin Mouette wrote:
> Le mercredi 26 septembre 2007 à 12:49 +0530, Antano Solar a écrit :
> > When the cmos battery is removed and power unplugged and the system
> > booted . I press f2(load defaults) in the cmos screen and the syetm boots
> > very slowly and detects my lan card. i.e ifconfig -a lists eth0.
> > But after this if I shut down the computer and start again or even
> > restart it , the network card is not detected . when the network card
> > goes undetected even if I boot into windows it remains undetected in
> > windows also. To make the netowrk card appear again I need to rerun the
> > procedure of removing the batters and unplugging power cable.
>
> If the problem appears in other operating systems, it sounds like it is
> caused by the hardware or the firmware - either the BIOS or the network
> card's.

The problem occurs in windows only if I do a shutdown in linux.
When i boot in windows and restart again or shutdown and start it is fine.
But the card disappears only after I boot into linux and shutdown 





Reply to: