Re: XFree 4 && Neomagic
Try adding HorizSync and VertRefresh definitions to your Screen section, ideally
taken from your old 3.x XF86Config. For some reason my laptop didn't properly
probe numbers that let it do higher res, when I copied the old values it worked
just fine.
Sounds like the neomagic probing code (or maybe the code to deal with PnP LCD
panels in general?) is still iffy.
On Tue, Nov 07, 2000 at 01:52:33PM -0100, Rodrigo Moya wrote:
> > On Tue, Nov 07 2000, at 12:40:09 -0100, Rodrigo Moya wrote:
> > > I've just upgraded my XFree to 4.0, and although it's working, I can't
> > > get a resolution higher than 640x480.
> >
> > Have you tried lowering DefaultDepth to 16?
> >
> yes, and running it in DefaultDepth 16 or 8 gives the following output for
> startx (sorry if it's too long). So, I'm still running at 640x480 and
> CTRL-ALT-+ does not change to another resolution.
>
> XFree86 Version 4.0.1d / X Window System
> (protocol Version 11, revision 0, vendor release 6400)
> Release Date: 27 October 2000
> If the server is older than 6-12 months, or if your card is newer
> than the above date, look for a newer version before reporting
> problems. (see http://www.XFree86.Org/FAQ)
> Operating System: Linux 2.2.18pre15 i686 [ELF]
> Module Loader present
> (==) Log file: "/var/log/XFree86.0.log", Time: Tue Nov 7 15:33:17 2000
> (==) Using config file: "/etc/X11/XF86Config-4"
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (??) unknown.
> (==) ServerLayout "Default Layout"
> (**) |-->Screen "Default Screen" (0)
> (**) | |-->Monitor "Generic Monitor"
> (**) | |-->Device "Generic Graphics Device"
> (**) |-->Input Device "Generic Keyboard"
> (**) XKB: rules: "xfree86"
> (**) XKB: model: "pc104"
> (**) XKB: layout: "es"
> (**) |-->Input Device "Generic Mouse"
> (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
> (==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (--) using VT number 7
>
> (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
> (II) Module bitmap: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libpcidata.a
> (II) Module pcidata: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 0.1.0
> (II) Loading /usr/X11R6/lib/modules/libscanpci.a
> (II) Module scanpci: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 0.1.0
> (II) Unloading /usr/X11R6/lib/modules/libscanpci.a
> (--) PCI:*(0:2:0) Neomagic NM2160 rev 1, Mem @ 0xe1000000/24, 0xfde00000/21, 0xfdd00000/20
> (II) Loading /usr/X11R6/lib/modules/libddc.a
> (II) Module ddc: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
> (II) Module GLcore: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
> (II) Module dbe: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
> (II) Module dri: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
> (II) Module drm: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
> (II) Module extmod: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
> (II) Module glx: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
> (II) Module pex5: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
> (II) Module record: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.13.0
> (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
> (II) Module xie: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
> (II) Module freetype: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.1.7
> (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
> (II) Module speedo: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
> (II) Module type1: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libvbe.a
> (II) Module vbe: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
> (II) Module int10: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/drivers/neomagic_drv.o
> (II) Module neomagic: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
> (II) Module mouse: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) NEOMAGIC: Driver for Neomagic chipsets: neo2070, neo2090, neo2093,
> neo2097, neo2160, neo2200, neo2230, neo2360, neo2380
> (--) Assigning device section with no busID to primary device
> (--) Chipset neo2160 found
> (II) Loading /usr/X11R6/lib/modules/libvgahw.a
> (II) Module vgahw: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 0.1.0
> (II) NEOMAGIC(0): Chipset is a MagicGraph 128XD (NM2160)
> (II) NEOMAGIC(0): initializing int10
> (II) NEOMAGIC(0): Primary V_BIOS segment is: 0xc000
> (II) NEOMAGIC(0): VESA BIOS detected
> (--) NEOMAGIC(0): Panel is a 1024x768 color TFT display
> (II) Loading /usr/X11R6/lib/modules/libi2c.a
> (II) Module i2c: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.2.0
> (II) NEOMAGIC(0): I2C bus "I2C bus" initialized.
> (II) NEOMAGIC(0): VESA VBE DDC supported
> (II) NEOMAGIC(0): Manufacturer: DEL Model: 71a5 Serial#: 1295079732
> (II) NEOMAGIC(0): Year: 2000 Week: 12
> (II) NEOMAGIC(0): EDID Version: 1.1
> (II) NEOMAGIC(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) NEOMAGIC(0): Sync: Separate
> (II) NEOMAGIC(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
> (II) NEOMAGIC(0): Gamma: 2.67
> (II) NEOMAGIC(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) NEOMAGIC(0): redX: 0.620 redY: 0.345 greenX: 0.290 greenY: 0.610
> (II) NEOMAGIC(0): blueX: 0.155 blueY: 0.065 whiteX: 0.281 whiteY: 0.311
> (II) NEOMAGIC(0): Supported VESA Video Modes:
> (II) NEOMAGIC(0): 720x400@70Hz
> (II) NEOMAGIC(0): 640x480@60Hz
> (II) NEOMAGIC(0): 640x480@75Hz
> (II) NEOMAGIC(0): 800x600@75Hz
> (II) NEOMAGIC(0): 1024x768@60Hz
> (II) NEOMAGIC(0): 1024x768@75Hz
> (II) NEOMAGIC(0): Manufacturer's mask: 0
> (II) NEOMAGIC(0): Supported Future Video Modes:
> (II) NEOMAGIC(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) NEOMAGIC(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) NEOMAGIC(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
> (II) NEOMAGIC(0): #3: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) NEOMAGIC(0): Supported additional Video Mode:
> (II) NEOMAGIC(0): clock: 28.3 MHz Image Size: 250 x 184 mm
> (II) NEOMAGIC(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0
> (II) NEOMAGIC(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 449 v_border: 0
> (II) NEOMAGIC(0): Serial No: 8221DMM1Y430
> (II) NEOMAGIC(0): Monitor name: DELL M770
> (II) NEOMAGIC(0): Ranges: V min: 48 V max: 160 Hz, H min: 30 H max: 69 kHz, PixClock max 2550 kHz
> (II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered.
> (II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
> (II) NEOMAGIC(0): I2C device "I2C bus:ddc2" registered.
> (II) NEOMAGIC(0): I2C device "I2C bus:ddc2" removed.
> (II) NEOMAGIC(0): Manufacturer: DEL Model: 71a5 Serial#: 1295079732
> (II) NEOMAGIC(0): Year: 2000 Week: 12
> (II) NEOMAGIC(0): EDID Version: 1.1
> (II) NEOMAGIC(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
> (II) NEOMAGIC(0): Sync: Separate
> (II) NEOMAGIC(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23
> (II) NEOMAGIC(0): Gamma: 2.67
> (II) NEOMAGIC(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
> (II) NEOMAGIC(0): redX: 0.620 redY: 0.345 greenX: 0.290 greenY: 0.610
> (II) NEOMAGIC(0): blueX: 0.155 blueY: 0.065 whiteX: 0.281 whiteY: 0.311
> (II) NEOMAGIC(0): Supported VESA Video Modes:
> (II) NEOMAGIC(0): 720x400@70Hz
> (II) NEOMAGIC(0): 640x480@60Hz
> (II) NEOMAGIC(0): 640x480@75Hz
> (II) NEOMAGIC(0): 800x600@75Hz
> (II) NEOMAGIC(0): 1024x768@60Hz
> (II) NEOMAGIC(0): 1024x768@75Hz
> (II) NEOMAGIC(0): Manufacturer's mask: 0
> (II) NEOMAGIC(0): Supported Future Video Modes:
> (II) NEOMAGIC(0): #0: hsize: 1024 vsize 768 refresh: 85 vid: 22881
> (II) NEOMAGIC(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
> (II) NEOMAGIC(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
> (II) NEOMAGIC(0): #3: hsize: 640 vsize 480 refresh: 85 vid: 22833
> (II) NEOMAGIC(0): Supported additional Video Mode:
> (II) NEOMAGIC(0): clock: 28.3 MHz Image Size: 250 x 184 mm
> (II) NEOMAGIC(0): h_active: 720 h_sync: 738 h_sync_end 846 h_blank_end 900 h_border: 0
> (II) NEOMAGIC(0): v_active: 350 v_sync: 388 v_sync_end 390 v_blanking: 449 v_border: 0
> (II) NEOMAGIC(0): Serial No: 8221DMM1Y430
> (II) NEOMAGIC(0): Monitor name: DELL M770
> (II) NEOMAGIC(0): Ranges: V min: 48 V max: 160 Hz, H min: 30 H max: 69 kHz, PixClock max 2550 kHz
> (**) NEOMAGIC(0): Depth 8, (--) framebuffer bpp 8
> (==) NEOMAGIC(0): Default visual is PseudoColor
> (==) NEOMAGIC(0): Using gamma correction (1.0, 1.0, 1.0)
> (--) NEOMAGIC(0): External CRT only display mode
> (==) NEOMAGIC(0): using linear mode
> (**) NEOMAGIC(0): using PCI Burst mode
> (--) NEOMAGIC(0): FB base address is set at 0xE1000000.
> (--) NEOMAGIC(0): MMIO base address is set at 0xFDE00000.
> (--) NEOMAGIC(0): VideoRAM: 2048 kByte
> (--) NEOMAGIC(0): Max Clock: 90000 kHz
> (II) NEOMAGIC(0): Generic Monitor: Using hsync range of 28.00-38.00 kHz
> (II) NEOMAGIC(0): Generic Monitor: Using vrefresh range of 43.00-72.00 Hz
> (II) NEOMAGIC(0): Clock range: 11.00 to 90.00 MHz
> (WW) NEOMAGIC(0): Default mode "640x350" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "640x400" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "720x400" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "640x480" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "640x480" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "640x480" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "800x600" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "800x600" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "800x600" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "1024x768" deleted (vrefresh out of range)
> (WW) NEOMAGIC(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "1024x768" deleted (hsync out of range)
> (WW) NEOMAGIC(0): Default mode "1024x768" deleted (bad mode clock/interlace/doublescan)
> (WW) NEOMAGIC(0): Default mode "1152x864" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1280x960" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1280x960" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1280x1024" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1280x1024" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1280x1024" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1600x1200" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1600x1200" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1600x1200" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1600x1200" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1600x1200" deleted (width requires unsupported line pitch)
> (WW) NEOMAGIC(0): Default mode "1792x1344" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Default mode "1792x1344" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Default mode "1856x1392" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Default mode "1856x1392" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Default mode "1920x1440" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Default mode "1920x1440" deleted (insufficient memory for mode)
> (WW) NEOMAGIC(0): Mode "1024x768" deleted (no mode of this name)
> (--) NEOMAGIC(0): Virtual size is 800x600 (pitch 800)
> (**) NEOMAGIC(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
> (++) NEOMAGIC(0): DPI set to (100, 100)
> (II) Loading /usr/X11R6/lib/modules/libfb.a
> (II) Module fb: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libxaa.a
> (II) Module xaa: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 1.0.0
> (II) Loading /usr/X11R6/lib/modules/libramdac.a
> (II) Module ramdac: vendor="The XFree86 Project"
> compiled for 4.0.1d, module version = 0.1.0
> (==) NEOMAGIC(0): Write-combining range (0xe1000000,0x200000)
> (II) NEOMAGIC(0): Not programming shadow registers
> (II) NEOMAGIC(0): Using linear framebuffer at: 0xE1000000
> (--) NEOMAGIC(0): 1617152 bytes off-screen memory available
> (II) NEOMAGIC(0): Using H/W Cursor.
> (II) NEOMAGIC(0): Using 424 scanlines of offscreen memory for pixmap caching
> (II) NEOMAGIC(0): Using XFree86 Acceleration Architecture (XAA)
> Screen to screen bit blits
> Solid filled rectangles
> Indirect CPU to Screen color expansion
> Solid Horizontal and Vertical Lines
> Scanline Image Writes
> Offscreen Pixmaps
> Setting up tile and stipple cache:
> 18 128x128 slots
> (II) NEOMAGIC(0): Acceleration Initialized
> (==) NEOMAGIC(0): Backing store disabled
> (==) NEOMAGIC(0): Silken mouse enabled
> (**) NEOMAGIC(0): DPMS enabled
> (II) Keyboard "Generic Keyboard" handled by legacy driver
> (**) Generic Mouse: Protocol: "PS/2"
> (**) Generic Mouse: Core Pointer
> (==) Generic Mouse: Buttons: 3
> (**) Generic Mouse: Emulate3Buttons, Emulate3Timeout: 50
> (II) XINPUT: Adding extended input device "Generic Mouse" (type: MOUSE)
>
>
> --
> To UNSUBSCRIBE, email to debian-devel-request@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
--
Elie Rosenblum That is not dead which can eternal lie,
http://www.cosanostra.net And with strange aeons even death may die.
Admin / Mercenary / System Programmer - _The Necronomicon_
Reply to: