[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: debian umbrella resurected

Hi all,

@ Eddy:
>The price is about 15-17 euros/piece + the shipment costs (I didn't >thought thoroughly about how this will be done, if it will) >but the minimal pieces/order is much lower than 500 pieces (about 40 is >possible).

Just to make clear: We could produce the umbrella for 18,79 (includes VAT) with the swirl on each or every second segment (in a one or two colored version). The production quantity has to be a minimum of 72 pieces. We could distribute the umbrella through LinuxLand within Europe with minimum shipping costs. Orders for larger quantities (> 20 pieces) can be handled through us.

If the list decides for a production of *one big* swirl all over the umbrella, this is only possible in a qty of 500.

BTW: To brake up the swirl to print it on the segments would not solve the problem with the large qty. This is because you have to print on the mounted umbrellas for low quantities. In this case, the print on each segment is only possible as far as 2 cm to the edge of the segment. So you can't get a connected image this way.

We could start the production immediately.

Best regards,

Christian Siegert
Open Source Factory GmbH
Stefan-George-Ring 22-24
81929 München

Tel.: +49 (0)89 99 34 13-50
Fax: +49 (0)89 99 34 13-69
E-Mail: info@opensourcefactory.com
www: http://www.opensourcefactory.com

Reply to: