Re: Re: Sarge installation problem
嗨,
/boot 分区只分 8M,按照我的经验是不行的。起码要超过50M。这里面的很大一部分是空间日志文件系统本身的要求。 我一直都是用的 ReiserFs ,它就要求起码在需要的空间上还有 30M 的空间才行。你用的什么文件系统? 象 ext2, ext3 是不是也有类似的限制要求??
通常,各种资料给的参考都是 /boot 要分 100M 的。我用 ReiserFs 格式,用的是底线: 80M
======= 2005-04-02 11:59:00 您在来信中写道:=======
>No detailed error reported, maybe I didn't know where to check it. Red
>screen showed up and simple error msg prompted. I used a Knoppix 3.7
>CD to boot up the machine, and checked /boot partition, it did look
>almost full, about 6MB out of 8MB used. I wonder how much disk space
>GRUB asks for.
>
>It doesn't look like a BIOS setting problem, as I did Woody install on
>same small /boot partition without problems, that was LILO though.
>
>On Apr 1, 2005 9:58 PM, Cui Chao <cuichao@vip.eyou.com> wrote:
>> 8M 的确很危险
>> 在我机器上
>> du -m /boot
>> 8 /boot
>> 但装不上grub应该不是这个的问题
>> 是不是你的BOIS有并设置了防止硬盘引导区写的功能
>> 报什么错?
>> On Fri, Apr 01, 2005 at 08:57:19PM -0500, Junpei Xia wrote:
>> >Hi there,
>> >
>> >I got a problem when installing Sarge with Debian Installer RC3
>> >netinst CD: GRUB failed to install, neither LILO, my disk partition is
>> >as follows:
>> >/dev/hda1 /boot 8MB
>> >/dev/hda2 / 500MB
>> >/dev/hda5 /home 27GB
>> >/dev/hda6 /opt 10GB
>> >/dev/hda7 /tmp 500MB
>> >/dev/hda8 /usr 20GB
>> >/dev/hda9 /usr/local 10GB
>> >/dev/hda10 /var 10GB
>> >/dev/hda4 swap
>> >
>> >Do you think my small /boot partition can be the cause of the failure?
>> >BTW, /srv is newly introduced in Sarge, what is it for? Is it
>> >suggested to allocate separate partition for it?
>> >
>> >Any help appreciated:)
>> >
>> >
>> >--
>> >To UNSUBSCRIBE, email to debian-chinese-gb-REQUEST@lists.debian.org
>> >with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>> >
>>
>
>
>--
>Best Regards,
>Junpei Xia
= = = = = = = = = = = = = = = = = = = =
致
礼!
zjg_mktech
zjg_mktech@163.com
2005-04-04
Reply to: