Re: Re: Sarge installation problem
Yes, it's too small. It was OK with EXT2. Now I have a 200MB /boot.
On Apr 3, 2005 10:01 PM, zjg_mktech <zjg_mktech@163.com> wrote:
> 嗨，
> /boot 分区只分 8M，按照我的经验是不行的。起码要超过50M。这里面的很大一部分是空间日志文件系统本身的要求。 我一直都是用的 ReiserFs ，它就要求起码在需要的空间上还有 30M 的空间才行。你用的什么文件系统？ 象 ext2， ext3 是不是也有类似的限制要求？？
> 通常，各种资料给的参考都是 /boot 要分 100M 的。我用 ReiserFs 格式，用的是底线： 80M
>
> ======= 2005-04-02 11:59:00 您在来信中写道：=======
>
> >No detailed error reported, maybe I didn't know where to check it. Red
> >screen showed up and simple error msg prompted. I used a Knoppix 3.7
> >CD to boot up the machine, and checked /boot partition, it did look
> >almost full, about 6MB out of 8MB used. I wonder how much disk space
> >GRUB asks for.
> >
> >It doesn't look like a BIOS setting problem, as I did Woody install on
> >same small /boot partition without problems, that was LILO though.
> >
> >On Apr 1, 2005 9:58 PM, Cui Chao <cuichao@vip.eyou.com> wrote:
> >> 8M 的确很危险
> >> 在我机器上
> >> du -m /boot
> >> 8 /boot
> >> 但装不上grub应该不是这个的问题
> >> 是不是你的BOIS有并设置了防止硬盘引导区写的功能
> >> 报什么错？
> >> On Fri, Apr 01, 2005 at 08:57:19PM -0500, Junpei Xia wrote:
> >> >Hi there,
> >> >
> >> >I got a problem when installing Sarge with Debian Installer RC3
> >> >netinst CD: GRUB failed to install, neither LILO, my disk partition is
> >> >as follows:
> >> >/dev/hda1 /boot 8MB
> >> >/dev/hda2 / 500MB
> >> >/dev/hda5 /home 27GB
> >> >/dev/hda6 /opt 10GB
> >> >/dev/hda7 /tmp 500MB
> >> >/dev/hda8 /usr 20GB
> >> >/dev/hda9 /usr/local 10GB
> >> >/dev/hda10 /var 10GB
> >> >/dev/hda4 swap
> >> >
> >> >Do you think my small /boot partition can be the cause of the failure?
> >> >BTW, /srv is newly introduced in Sarge, what is it for? Is it
> >> >suggested to allocate separate partition for it?
> >> >
> >> >Any help appreciated:)
> >> >
> >> >
> >> >--
> >> >To UNSUBSCRIBE, email to debian-chinese-gb-REQUEST@lists.debian.org
> >> >with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> >> >
> >>
> >
> >
> >--
> >Best Regards,
> >Junpei Xia
>
> = = = = = = = = = = = = = = = = = = = =
>
> 致
> 礼！
>
> zjg_mktech
> zjg_mktech@163.com
> 2005-04-04
>
>
--
Best Regards,
Junpei Xia
Reply to: