Please check release-notes.sgml.02(GB)
各位好!
拜托校对一下。
Wen
##################################################################
<sect id="newinst">安装系统有何新内容?
<p><package>boot-floppies</package>包和<package/debian-cd/包在 Debian 2.1
的基础上做了一些改进。在通过网络安装支持方面有明显的改进，包括 DHCP 配置
支持。更多的体系结构支持串行控制台。
<p>旧的配置文件和任务选择系统被 Debian 的"meta包"（仅仅是提供与其它包依赖
关系的包）和称作<package/tasksel/的包的界面所代替。这意味着不仅在安装时可
使用这些任务，任何时候都可使用它们，升级时也可保留。
<p>过去被一组 shell 脚本来完成的再启动后配置,现在被使用<package/debconf/
的<package/base-config/ 包所代替。可以预料在下一个 Debian 发行版本
<package/debconf/ 将成为安装和配置的与用户的主要界面。
<![ %i386 [
<p>内核映象可以从各种“味道”的内核中得到。它们支持各组不同硬件的组合。
对于&arch-title;的体系结构，这些内核可以在&debian; &release;中得到。
<taglist>
<tag>`vanilla'
<item>Debian 中的标准内核包。它通过 Linux 建立的模块包括几乎所有的硬件
支持。它包括了网卡、SCSI板、声卡、Video4Linux板等驱动程序。`vanilla'
内核包括一个急救、一个根和三个驱动程序盘。
<tag>`udma66'
<item>它除包含 Andre Hedrick 的 IDE 补丁以支持 UDMA66 设备外，与`vanilla'
非常类似。
<tag>`compact'
<item>除去掉了许多不常用的设备(如声卡、v41等)驱动程序外，与`vanilla'类似。
另外它支持几个常用的 PCI 网卡 -- NE2000、3COM 3c905、Tulip、Via-Rhine 和
Intel EtherExpress Pro100。这些内部驱动程序使你可以充分利用 Debian 的网络
安装特点来通过网络安装驱动程序和基本系统，以至仅需要制作根和急救盘。
`compact' 还支持几个通用的 RAID 控制器: DAC960 和 Compaq's SMART2 RAID
控制器。`compact'内核包括一个急救、一个根和一个驱动程序盘。
<tag>`idepci'
<item>只支持 IDE 和 PCI 设备(和极少数的 ISA 设备)的内核。这个内核只有当
其它内核中的 SCSI 板在启动时引起系统挂断(可能是由于系统中矛盾的配置，
或者是驱动程序的错误行为造成的)使使用。`idepci'内核还有一个内部的 IDE
软盘驱动程序使你能从 LS120 或 ZIP 设备安装。
</taglist>
这些内核的核配置文件可以在它们各自的目录下的名为"kernel-config"的文件中
找到。
]]>
###################################### 原文
<sect id="newinst">What's New in the Installation System?
<p>The <package>boot-floppies</package> and the <package/debian-cd/
packages include a number of improvements over Debian 2.1. There have been
notable improvements in network installation support, including DHCP
configuration support. More architectures support serial console
installation.
<p>The old profiles and tasks selection system has been replaced by Debian
"meta-packages" (packages whose only purpose is to depend on other
packages) and an interface called <package/tasksel/. This means that
tasks can be used at any time, not just installation time, and can be
retained across upgrades.
<p>Post-reboot configuration, which used to be performed by a batch of
shell scripts, are now performed by the <package/base-config/ package,
which uses <package/debconf/. It is expected that for the next major
Debian release, <package/debconf/ will be the main interface users
interact with during installation and configuration.
<![ %i386 [
<p>Kernel images are available in various "flavors". These flavors each
support a different set of hardware. The flavors available in &debian;
&release; for &arch-title; are:
<taglist>
<tag>`vanilla'
<item>The standard kernel package available in Debian. This includes
almost all drivers supported by Linux built as modules. This includes
drivers for network devices, SCSI devices, sound cards, Video4Linux
devices, etc. The `vanilla' flavor includes one rescue, one root and
three driver disks.
<tag>`udma66'
<item>Very similar to `vanilla', except it includes Andre Hedrick's
IDE patches to support UDMA66 devices.
<tag>`compact'
<item>Like `vanilla', but with many of the less-frequently-use drivers
removed (sound, v4l, etc). In addition, it has built in support for
several popular PCI ethernet devices -- NE2000, 3COM 3c905, Tulip,
Via-Rhine and Intel EtherExpress Pro100. These built in drivers allow
you to take full advantage of the Debian installer's net install feature
to install the driver and/or base system over the network so that only
the root and rescue disks need to be made. Finally, `compact' also
supports several common RAID controllers: DAC960, and Compaq's SMART2
RAID controllers. The `compact' flavor includes one rescue, one root and
one driver disks.
<tag>`idepci'
<item>Kernel that supports only IDE and PCI devices (and a very small
number of ISA devices). This kernel should be used if the SCSI drivers
in the other flavors cause your system to hang on startup (probably
because of resource conflicts, or a misbehaving driver/card in your
system). The `idepci' flavor also has a built-in ide-floppy driver so
that you can install from LS120 or ZIP devices.
</taglist>
The kernel config files for these flavors can be found in their respective
directories in a file named "kernel-config".
]]>
Reply to: