rescue: f6.txt 場苺

[ha shao <hashao@chinese.com>]

Bear with me...
%%%%%%%%%% 翻譯

0f特定的啟動參數 - 各種磁盤控制器07

您可以在提示符0fboot:07後使用以下啟動參數，可同啟動方式(參見<09F307>)一起使用。

0f硬件                         指定參數07
Adaptec 151x, 152x           0faha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
Adaptec 1542                 0faha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
Adaptec 274x, 284x           0faic7xxx=no_reset07 (如果為非零'non-zero'則激活)
ATAPI/IDE CD-ROM             0fhd07{0fa07,0fb07,0fc07,0fd07}0f=cdrom07   (通常不需要)
BusLogic SCSI Hosts          0fbuslogic=0biobase07
某些DELL機型                 0faic7xxx=no_probe07
Future Domain TMC-8xx/950    0ftmc8xx=0bmem_base0f,0birq07
基于NCR的SCSI控制器          0fsym53c8xx=safe:y07
Pro Audio Spectrum           0fpas16=0biobase0f,0birq07
PS/2 ESDI (MCA)              0fed=0bcyl0f,0bhead0f,0bsec07
希捷ST-0x                    0fst0x=0bmem_base0f,0birq07
Trantor T128                 0ft128=0bmem_base0f,0birq07

如果您的系統在啟動時掛起，而且您看到的最後提示信息為"aec671x-detect.."時，
請試試0fgdth=disable:y07看看。

請按<09回車鍵07>或者輸入啟動方式，參數，然後按<09回車鍵07>啟動。
請按功能鍵 <09F107> 查閱幫助索引頁面。

%%%%%%%%%%%%%%%

0fSPECIAL BOOT ARGUMENTS - VARIOUS DISK DRIVES07

You can use the following boot arguments at the 0fboot:07 prompt, 
in combination with the boot method (see <09F307>).

0fHARDWARE                     PARAMETER TO SPECIFY07
Adaptec 151x, 152x           0faha152x=0biobase07[0f,0birq07[0f,0bscsi-id07[0f,0breconnect07]]]
Adaptec 1542                 0faha1542=0biobase07[0f,0bbuson0f,0bbusoff07[0f,0bdmaspeed07]]
Adaptec 274x, 284x           0faic7xxx=no_reset07    (enabled if non-zero)
ATAPI/IDE CD-ROM             0fhd07{0fa07,0fb07,0fc07,0fd07}0f=cdrom07   (usually unnecessary)
BusLogic SCSI Hosts          0fbuslogic=0biobase07
Certain DELL machines        0faic7xxx=no_probe07
Future Domain TMC-8xx/950    0ftmc8xx=0bmem_base0f,0birq07
NCR-based SCSI controller    0fsym53c8xx=safe:y07
Pro Audio Spectrum           0fpas16=0biobase0f,0birq07
PS/2 ESDI (MCA)              0fed=0bcyl0f,0bhead0f,0bsec07
Seagate ST-0x                0fst0x=0bmem_base0f,0birq07
Trantor T128                 0ft128=0bmem_base0f,0birq07
If your system hangs when booting, and the last message you see is
"aec671x-detect..", try      0fgdth=disable:y07

Press <09ENTER07> or type boot method, arguments, and <09ENTER07> to boot.
Press function key <09F107> for the help index.

%%%%%%%%%%%%%

-- 
Best regard
hashao

--
To UNSUBSCRIBE, email to debian-chinese-gb-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org

-- 
| This message was re-posted from debian-chinese-gb@lists.debian.org
| and converted from gb2312 to big5 by an automatic gateway.