Package: installation-reports
Boot method: <network/preseed>
Image version: <http://ftp.nl.debian.org/debian/dists/squeeze/main/installer-i386/current/images/netboot/>
Date: <April 19th 2011, 1200 hours>
Machine: <custom>
Partitions:
var/log # df -Tl
df: invalid option -- 'T'
BusyBox v1.17.1 (Debian 1:1.17.1-8) multi-call binary.
Usage: df [-Pkmh] [FILESYSTEM]...
/var/log # df
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs
1817872 40 1817832 0% /dev
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [OK ]
Detect network card: [OK ]
Configure network: [OK ]
Detect CD: [ OK]
Load installer modules: [OK ]
Detect hard drives: [E ]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
We have a number of exact same machines that have a 2GB ATP flash
cards in addition to mechanical disks. When I try to install, the
installer sees the USB flash card as /dev/sda, but it does not sees
the disk, however if I physically remove the flash card then the
installer sees all the disks. This is happening with Squeeze. I have a
nfsroot environment built on Lenny and it sees all the disks as well
as the flash card, all as /dev/sdX.
Regards
Attachment:
installation-report.tgz
Description: GNU Zip compressed data