[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#311998: marked as done (Debina Installation report)



Your message dated Wed, 08 Sep 2010 03:58:00 +0000
with message-id <E1OtBnM-0004ie-59@ravel.debian.org>
and subject line Closing old installation report #311998
has caused the Debian Bug report #311998,
regarding Debina Installation report
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
311998: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=311998
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports

INSTALL REPORT

Debian-installer-version: Downloaded from www.debian.org 29/05/2005.
uname -a: Linux k7-asus 2.6.8 #2 Sat Jun 4 16:25:33 CEST 2005 i686 GNU/Linux
Date: 04/06/2005
Method: Network install over adsl, attached at TouchSpeed ADSL router with 
	DHCP server mode enabled using ftp.rediris.es server.

Machine: ASUS A7N8X-X MotherBoard (equipped with nForce 2 chipset)
		nForce 2 IDE controller
		nForce 2 Memory DDR controller
		nForce 2 Audio controller (AC97 Codec)
		nForce 2 Lan OnBoard Controller
	 NVIDIA FX5700 LE 256 Mb AGP x8 VGA Card
	 RealTek 8139 10/100 Mbits Lan Card (This one was the used to install)
	 AverMedia TV Card (based on Bt 878)
 	 HDA => Maxtor 6Y200P0 (UDMA 133)
	 HDB => Seagate ST33210A (UDMA 33)
	 HDC => HL-DT-STDVD-ROM GDR8162B (UDMA 33)
	 HDD => HL-DT-ST DVDRAM GSA-4082B
	 Hyundai DeluxScan 17"
	 Hewlett Packard DeskJet 320 Portable
	 USB SigmaTel STir 4200 InfraRed Port

Processor: AMD Athlon XP 2800+ CPU

Memory:	 512 Mb DDR 400 (PC3200) RAM Infineon (formerly Siemens) modules 

Root Device: Ide0, Master, Partition HDA6 (logical partition).

Root Size/partition table: 
Disco /dev/hda: 203.9 GB, 203928109056 bytes
255 cabezas, 63 sectores/pista, 24792 cilindros
Unidades = cilindros de 16065 * 512 = 8225280 bytes

Disposit. Inicio    Comienzo      Fin      Bloques  Id  Sistema
/dev/hda1               1       19851   159453126   17  HPFS/NTFS oculta
/dev/hda2   *       19852       22723    23069340    7  HPFS/NTFS
/dev/hda3           22724       24792    16619242+   f  W95 Ext'd (LBA)
/dev/hda5           24669       24792      995998+  82  Linux swap / Solaris
/dev/hda6           22724       24668    15623149+  83  Linux

Disco /dev/hdb: 3249 MB, 3249340416 bytes
16 cabezas, 63 sectores/pista, 6296 cilindros
Unidades = cilindros de 1008 * 512 = 516096 bytes

Disposit. Inicio    Comienzo      Fin      Bloques  Id  Sistema
/dev/hdb3   *           1        6296     3173152+   c  W95 FAT32 (LBA)

proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/hda6 on / type ext2 (rw,errors=remount-ro)
/dev/hda1 on /windows/datos type ntfs (rw)
/dev/hda2 on /windows/xp type ntfs (rw)
/dev/hdb3 on /windows/98 type vfat (rw)
/dev/hdc on /media/dvdrom type iso9660 (ro,noexec,nosuid,nodev)

Output of lspci and lspci -n:
lspci:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different
version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet
Controller (rev a1)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2
AC97 Audio Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:07.0 Multimedia video controller: Brooktree Corporation Bt878
Video Capture (rev 11)
0000:01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio
Capture (rev 11)
0000:01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:02:00.0 VGA compatible controller: nVidia Corporation: Unknown
device 0343 (rev a1)

lspci -n:
0000:00:00.0 0600: 10de:01e0 (rev c1)
0000:00:00.1 0500: 10de:01ea (rev c1)
0000:00:00.2 0500: 10de:01ee (rev c1)
0000:00:00.3 0500: 10de:01ed (rev c1)
0000:00:00.4 0500: 10de:01ec (rev c1)
0000:00:00.5 0500: 10de:01ef (rev c1)
0000:00:01.0 0601: 10de:0060 (rev a4)
0000:00:01.1 0c05: 10de:0064 (rev a2)
0000:00:02.0 0c03: 10de:0067 (rev a4)
0000:00:02.1 0c03: 10de:0067 (rev a4)
0000:00:02.2 0c03: 10de:0068 (rev a4)
0000:00:04.0 0200: 10de:0066 (rev a1)
0000:00:06.0 0401: 10de:006a (rev a1)
0000:00:08.0 0604: 10de:006c (rev a3)
0000:00:09.0 0101: 10de:0065 (rev a2)
0000:00:1e.0 0604: 10de:01e8 (rev c1)
0000:01:07.0 0400: 109e:036e (rev 11)
0000:01:07.1 0480: 109e:0878 (rev 11)
0000:01:09.0 0200: 10ec:8139 (rev 10)
0000:02:00.0 0300: 10de:0343 (rev a1)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O] - only try the RealTek Lan Card
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [E] - only mounted de / and the swap, the other were 
				ignored
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
	I have to reinstall de the system once again, because after recompiling
the 2.6.8 kernel the grub didn't boot any kerel (neither the new or previous),
probably because of bad configured ide options.


--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
reasons:
- it was reported with a pre-lenny version of Debian
  Installer.
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful


The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.



--- End Message ---

Reply to: