[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#239367: marked as done ([i386] [114360320] [netinst] no support for speedtouch dsl modem; cd writer and dvd player do not work)

Your message dated Wed, 08 Sep 2010 03:58:33 +0000
with message-id <E1OtBnt-0005pw-DT@ravel.debian.org>
and subject line Closing old installation report #239367
has caused the Debian Bug report #239367,
regarding [i386] [114360320] [netinst] no support for speedtouch dsl modem; cd writer and dvd player do not work
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org

239367: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=239367
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: installation-reports


Debian-installer-version: 114360320 Mar 15 22:38 sarge-i386-netinst.iso
uname -a: Linux noisy 2.4.25-1-k7 #1 Tue Feb 24 14:24:28 EST 2004 i686 
Date:  Mar 17 2004
Method: How did you install? burnt netinst CD. What did you boot off?  CD

Machine: generic AMD Athlon XP on ASUS A7V333
Processor: AMD Athlon(TM) XP 2000+
Memory: Mem:        256688
Root Device: 
  hda: ST340016A, ATA DISK drive
  hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100)
  Partition check:
  /dev/ide/host0/bus0/target0/lun0: [PTBL] [4865/255/63] p1 p2 p3 < p5 p6 p7 > p4

Root Size/partition table:
hda1           Boot            Primary      W95 FAT32
hda2                           Primary      W95 FAT32 (LBA)
hda5           NC              Logical      Linux ext3    / (new sarge)
hda6           NC              Logical      Linux ext3    / (old sarge/unstable)
hda7           NC              Logical      Linux ext3    /home
hda4                           Primary      Linux swap       
Output of lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:05.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:09.0 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:09.1 USB Controller: VIA Technologies, Inc. USB (rev 50)
00:09.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 23)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 23)
01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [E]
Config network:         [OE]
Detect CD:              [E]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    []
Reboot:                 [O]

Installer does not find kernel module for usb DSL modem speedtouch, 
grep -rl speedt /var/log/debian-installer/* returns nothing.
Standard debian kernel:
Linux version 2.4.25-1-k7 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #1
  Tue Feb 24 14:24:28 EST 2004 (with discover and hotplug)
does autoload module speedtch: usb.c: registered new driver speedtch
Packages speedtouch and libatm1 are not present on the install image.
These packages (and ppp) must be available to setup the speedtouch modem
before you can connect to the net to complete netinst.
My cdwriter and dvd-player were detected as /dev/hdd and /dev/hdc and both
did not work.
After adding the next line to grub.conf
  kernel /vmlinuz ro root=/dev/hda5 hdc=ide-scsi hdd=ide-scsi
and adding the following 2 lines to /etc/modutils/actions 
  options ide-cd ignore='hdc hdd'
  pre-install sg modprobe ide-scsi
and running update-modules both work fine.

--- End Message ---
--- Begin Message ---
We are closing this installation report for one of the following
- it was reported with a pre-lenny version of Debian
- indications in the installation report give the feeling that
  the reported problem waslying in another software, unrelated to
  D-I, which we can't easily identify.
- indications in the installation report suggest that it may have been
  fixed in a more recent version of a D-I component
- it was successful and we forgot closing it..:-)
- it has no information we consider useful

The D-I team is currently in the process of cleaning out the old spool
of installation reports that haven't bene processed yet. 

In case you think that the problem you reported has chances to be
still present, please reiterate your installation test with
a more recent image of D-I, if you're in position of doing this.

You'll find daily builds at
http://www.debian.org/devel/debian-installer. We recommend you choose
the netboot image, in the "daily builds section", then choose to
install "squeeze" when prompted.

If some problems are found, please report them with a new bug sent
against installation-reports.

Many thanks for your understanding and your help improving Debian,
past and present.

--- End Message ---

Reply to: