[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#519246: Cannot be install boot loader in Lenny-stable



package: debian-installer
version: 20090123


Hardware: server SuperMicro 6013P-8,

CPU Intel Xeon 2.66 GHz, 2x512 MB ECC DDR, 2x36 GB SCSI HDD, MB
X5DPR-8G2+, RAID Adaptec Ultra320 SCSI

# lspci
00:00.0 Host bridge: Intel Corporation E7501 Memory Controller Hub (rev 01)
00:00.1 Class ff00: Intel Corporation E7500/E7501 Host RASUM Controller
(rev 01)
00:02.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface B
PCI-to-PCI Bridge (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1
(rev 02)
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB Controller #2
(rev 02)
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB Controller #3
(rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CA LPC Interface Controller
(rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CA Ultra ATA Storage
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
01:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04)
01:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04)
01:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04)
01:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04)
02:03.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) (rev 01)
02:03.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet
Controller (Copper) (rev 01)
03:03.0 RAID bus controller: Adaptec (formerly DPT) SmartRAID V
Controller (rev 01)
04:01.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)

Initial boot:               [O]
Detect network card:        [O]
Configure network:          [O]
Detect CD:                  [O]
Load installer modules:     [O]
Detect hard drives:         [O]
Partition hard drives:      [O]
Create file systems:        [O]
Mount partitions:           [O]
Install base system:        [O]
Install boot loader:        [E]
Installed system ok:        [O]

Problem in the fact that boot loader cannot be installed into the
devices, which are not located directly in /dev

This problem is solved by the creation host links /dev/sdaX on
/dev/i2o/hdaX (e. g. ln /dev/sda /dev/i2o/hda && ln /dev/sda1
/dev/i2o/hda1 && ln /dev/sda2 /dev/i2o/hda2 && ln /dev/sdaX /dev/i2o/hdaX)
and install system in /dev/sdaX, after the fact will have to correct by
hand the parameters of bootloader or remake kernel with options

Device Drivers  --->
        <*> I2O device support  --->
| |      --- I2O device support                            | |
| |           [*]   Enable LCT notification                | |
| |           [*]   Enable Adaptec extensions              | |
| |           [*]   Enable 64-bit DMA                      | |
| |           <*>   I2O Configuration support              | |
| |           [*]     Enable ioctls (OBSOLETE)             | |
| |           <*>   I2O Bus Adapter OSM                    | |
| |           <*>   I2O Block OSM                          | |
| |           <*>   I2O SCSI OSM                           | |
| |           <*>   I2O /proc support                      | |

and correct /etc/fstab (replace /dev/i2o/hd*X by /dev/sd*X)


Thanks!





Reply to: